Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,840 to 9,850 of 10,894 results)

  • Articles and reports: 12-001-X19980024348
    Description:

    Gross flows among labour force states are of great importance in understanding labour market dynamics. Observed flows are typically subject to classification errors, which may induce serious bias. In this paper, some of the most common strategies, used to collect longitudinal information about labour force condition are reviewed, jointly with the modelling approaches developed to correct gross flows, when affected by classification errors. A general framework for estimating gross flows is outlined. Examples are given of different model specifications, applied to data collected with different strategies. Specifically, two cases are considered, i.e., gross flows from (i) the U.S. Survey of Income and Program Participation and (ii) the French Labour Force Survey, a yearly survey collecting retrospective monthly information.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024349
    Description:

    Measurement of gross flows in labour force status is an important objective of the continuing labour force surveys carried out by many national statistics agencies. However, it is well known that estimation of these flows can be complicated by nonresponse, measurement errors, sample rotation and complex design effects. Motivated by nonresponse patterns in household-based surveys, this paper focuses on estimation of labour force gross flows, while simultaneously adjusting for nonignorable nonresponse. Previous model-based approaches to gross flows estimation have assumed nonresponse to be an individual-level process. We propose a class of models that allow for nonignorable household-level nonresponse. A simulation study is used to show, that individual-level labour force gross flows estimates from household-based survey data, may be biased and that estimates using household-level models can offer a reduction in this bias.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024350
    Description:

    In longitudinal surveys, simple estimates of change, such as differences of percentages may not always be efficient enough to detect changes of practical relevance, especially in sub-populations. The use of models, which can represent the dependence structure of the longitudinal survey, can help to solve this problem. One of the main characteristics observed by the Swiss Labour Force Survey (SLFS) is the employment status. As the survey is designed as a rotating panel, the data from the SLFS are multivariate categorical data, where a large proportion of the response profiles are missing by design. The multivariate logistic model, introduced by Glonek and McCullagh (1995) as a generalisation of logistic regression, is attractive in this context, since it allows for dependent repeated observations and incomplete response profiles. We show that, using multivariate logistic regression, we can represent the complex dependence structure of the SLFS by a small number of parameters, and obtain more efficient estimates of change.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024351
    Description:

    To calculate price indexes, data on "the same item" (actually a collection of items narrowly defined) must be collected across time periods. The question arises whether such "quasi-longitudinal" data can be modeled in such a way as to shed light on what a price index is. Leading thinkers on price indexes have questioned the feasibility of using statistical modeling at all for characterizing price indexes. This paper suggests a simple state space model of price data, yielding a consumer price index that is given in terms of the parameters of the model.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024352
    Description:

    The National Population Health Survey (NPHS) is one of Statistics Canada's three major longitudinal household surveys providing an extensive coverage of the Canadian population. A panel of approximately 17,000 people are being followed up every two years for up to twenty years. The survey data are used for longitudinal analyses, although an important objective is the production of cross-sectional estimates. Each cycle panel respondents provide detailed health information (H) while, to augment the cross-sectional sample, general socio-demographic and health information (G) are collected from all members of their households. This particular collection strategy presents several observable response patterns for Panel Members after two cycles: GH-GH, GH-G*, GH-**, G*-GH, G*-G* and G*-**, where "*" denotes a missing portion of data. The article presents the methodology developed to deal with these types of longitudinal nonresponse as well as with nonresponse from a cross-sectional perspective. The use of weight adjustments for nonresponse and the creation of adjustment cells for weighting using a CHAID algorithm are discussed.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024353
    Description:

    This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024354
    Description:

    This article deals with an attempt to cross-tabulate two categorical variables, which were separately collected from two large independent samples, and jointly collected from one small sample. It was assumed that the large samples have a large set of common variables. The proposed estimation technique can be considered a mix between calibration techniques and statistical matching. Through calibration techniques, it is possible to incorporate the complex designs of the samples in the estimation procedure, to fulfill some consistency requirements between estimates from various sources, and to obtain fairly unbiased estimates for the two-way table. Through the statistical matching techniques, it is possible to incorporate a relatively large set of common variables in the calibration estimation, by means of which the precision of the estimated two-way table can be improved. The estimation technique enables us to gain insight into the bias generally obtained, in estimating the two-way table, by sole use of the large samples. It is shown how the estimation technique can be useful to impute values of the one large sample (donor source) into the other large sample (host source). Although the technique is principally developed for catagorical variables Y and Z, with a minor modification, it is also applicable for continuous variables Y and Z.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024355
    Description:

    Two sampling strategies have been proposed for estimating the finite population total for the most recent occasion, based on the samples selected over two occasions involving varying probability sampling schemes. Attempts have been made to utilize the data collected on a study variable, in the first occasion, as a measure of size and a stratification variable for selection of the matched-sample on the second occasion. Relative efficiencies of the proposed strategies have been compared with suitable alternatives.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024356
    Description:

    In the nonsurvey setting,"exact" confidence intervals for proportions calculated using the binomial distribution are frequently used instead of intervals based on approximate normality when the number of positive counts is small. With complex survey data, the binomial intervals are not applicable, so intervals based on the assumed approximate normality of the sample-weighted proportion are used, even if the number of positive counts is small. We propose a simple modification of the binomial intervals to be used in this situation. Limited simulations are presented that show the coverage probability of the proposed intervals is superior to that of the normality-based intervals, logit-transform intervals, and intervals based on a Poisson approximation. Applications are given involving the prevalence of Human Immunodeficiency Virus (HIV) based on data from the third National Health and Nutrition Examination Survey, and the proportion of users of cocaine based on data from the Hispanic Health and Nutrition Examination Survey.

    Release date: 1999-01-14

  • 9,850. Childhood asthma Archived
    Articles and reports: 82-003-X19980034137
    Geography: Canada
    Description:

    This article describes trends in the prevalence of asthma among children aged 0 to 14 from 1978/79 to 1994/95, and in hospital separations for asthma from 1974/75 to 1994/95. It also examines factors associated with childhood asthma.

    Release date: 1999-01-12
Reference (2,038)

Reference (2,038) (980 to 990 of 2,038 results)

  • Surveys and statistical programs – Documentation: 11-522-X19990015678
    Description:

    A population needs-based health care resource allocation model was developed and applied using age, sex and health status of populations to measure population need for health care in Ontario. To develop the model, provincial data on self-assessed health and health service utilization by age and sex from 62,413 respondents to the 1990 Ontario Health Survey (OHS) were used in combination with provincial health care expenditure data for the fiscal year 1995/96 by age and sex. The model was limited to the services that were covered in the OHS (general practitioner, specialist physician, optometry, physiotherapy, chiropractic and acute hospital). The distribution of utilization and expenditures between age-sex-health status categories was used to establish appropriate health care resource shares for each age-sex-health status combination. These resource shares were then applied to geographic populations using age, sex and health status data from the OHS together with more recent population estimates to determine the needs-based health care resource allocation for each area. Total dollar allocations were restricted to sum to the 1995/96 provincial budget and were compared with 1995/96 allocations to determine the extent to which Ontario allocations are consistent with the relative needs of the area populations.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015680
    Description:

    To augment the amount of available information, data from different sources are increasingly being combined. These databases are often combined using record linkage methods. When there is no unique identifier, a probabilistic linkage is used. In that case, a record on a first file is associated with a probability that is linked to a record on a second file, and then a decision is taken on whether a possible link is a true link or not. This usually requires a non-negligible amount of manual resolution. It might then be legitimate to evaluate if manual resolution can be reduced or even eliminated. This issue is addressed in this paper where one tries to produce an estimate of a total (or a mean) of one population, when using a sample selected from another population linked somehow to the first population. In other words, having two populations linked through probabilistic record linkage, we try to avoid any decision concerning the validity of links and still be able to produce an unbiased estimate for a total of the one of two populations. To achieve this goal, we suggest the use of the Generalised Weight Share Method (GWSM) described by Lavallée (1995).

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015682
    Description:

    The application of dual system estimation (DSE) to matched Census / Post Enumeration Survey (PES) data in order to measure net undercount is well understood (Hogan, 1993). However, this approach has so far not been used to measure net undercount in the UK. The 2001 PES in the UK will use this methodology. This paper presents the general approach to design and estimation for this PES (the 2001 Census Coverage Survey). The estimation combines DSE with standard ratio and regression estimation. A simulation study using census data from the 1991 Census of England and Wales demonstrates that the ratio model is in general more robust than the regression model.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015684
    Description:

    Often, the same information is gathered almost simultaneously for several different surveys. In France, this practice is institutionalized for household surveys that have a common set of demographic variables, i.e., employment, residence and income. These variables are important co-factors for the variables of interest in each survey, and if used carefully, can reinforce the estimates derived from each survey. Techniques for calibrating uncertain data can apply naturally in this context. This involves finding the best unbiased estimator in common variables and calibrating each survey based on that estimator. The estimator thus obtained in each survey is always a linear estimator, the weightings of which can be easily explained and the variance can be obtained with no new problems, as can the variance estimate. To supplement the list of regression estimators, this technique can also be seen as a ridge-regression estimator, or as a Bayesian-regression estimator.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015686
    Description:

    The U.S. Consumer Expenditure Survey uses two instruments, a diary and an in-person interview, to collect data on many categories of consumer expenditures. Consequently, it is important to use these data efficiently to estimate mean expenditures and related parameters. Three options are: (1) use only data from the diary source; (2) Use only data from the interview source; and (3) use generalized least squares, or related methods, to combine the diary and interview data. Historically, the U.S. Bureau of Labor Statistics has focused on options (1) and (2) for estimation at the five or six-digit Universal Classification Code level. Evaluation and possible implementation of option (3) depends on several factors, including possible measurement biases in the diary and interview data; the empirical magnitude of these biases, relative to the standard errors of customary mean estimators; and the degree of homogeneity of these biases across strata and periods. This paper reviews some issues related to options (1) through (3); describes a relatively simple generalized least squares method for implementation of option (3); and discussed the need for diagnostics to evaluate the feasibility and relative efficiency of the generalized least squares method.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015688
    Description:

    The geographical and temporal relationship between outdoor air pollution and asthma was examined by linking together data from multiple sources. These included the administrative records of 59 general practices widely dispersed across England and Wales for half a million patients and all their consultations for asthma, supplemented by a socio-economic interview survey. Postcode enabled linkage with: (i) computed local road density; (ii) emission estimates of sulphur dioxide and nitrogen dioxides, (iii) measured/interpolated concentration of black smoke, sulphur dioxide, nitrogen dioxide and other pollutants at practice level. Parallel Poisson time series analysis took into account between-practice variations to examine daily correlations in practices close to air quality monitoring stations. Preliminary analyses show small and generally non-significant geographical associations between consultation rates and pollution markers. The methodological issues relevant to combining such data, and the interpretation of these results will be discussed.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015690
    Description:

    The artificial sample was generated in two steps. The first step, based on a master panel, was a Multiple Correspondence Analysis (MCA) carried out on basic variables. Then, "dummy" individuals were generated randomly using the distribution of each "significant" factor in the analysis. Finally, for each individual, a value was generated for each basic variable most closely linked to one of the previous factors. This method ensured that sets of variables were drawn independently. The second step consisted in grafting some other data bases, based on certain property requirements. A variable was generated to be added on the basis of its estimated distribution, using a generalized linear model for common variables and those already added. The same procedure was then used to graft the other samples. This method was applied to the generation of an artificial sample taken from two surveys. The artificial sample that was generated was validated using sample comparison testing. The results were positive, demonstrating the feasibility of this method.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015692
    Description:

    Electricity rates that vary by time-of-day have the potential to significantly increase economic efficiency in the energy market. A number of utilities have undertaken economic studies of time-of-use rates schemes for their residential customers. This paper uses meta-analysis to examine the impact of time-of-use rates on electricity demand pooling the results of thirty-eight separate programs. There are four key findings. First, very large peak to off-peak price ratios are needed to significantly affect peak demand. Second, summer peak rates are relatively effective compared to winter peak rates. Third, permanent time-or-use rates are relatively effective compared to experimental ones. Fourth, demand charges rival ordinary time-of-use rates in terms of impact.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015694
    Description:

    We use data on 14 populations of coho salmon to estimate critical parameters that are vital for management of fish populations. Parameter estimates from individual data sets are inefficient and can be highly biased, and we investigate methods to overcome these problems. Combination of data sets using nonlinear mixed effects models provides more useful results, however questions of influence and robustness are raised. For comparison, robust estimates are obtained. Model-robustness is also explored using a family of alternative functional forms. Our results allow ready calculation of the limits of exploitation and may help to prevent extinction of fish stocks. Similar methods can be applied in other contexts where parameter estimation is part of a larger decision-making process.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 75F0002M2000001
    Description:

    This user's guide provides a detailed description of the CD-ROM Income trends in Canada (13F0022XCB). It also provides a glossary, a description of the major concepts as well as an overview of the data source, the Survey of Consumer Finances.

    Release date: 2000-02-02