Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,840 to 9,850 of 10,894 results)

  • Articles and reports: 12-001-X19980024348
    Description:

    Gross flows among labour force states are of great importance in understanding labour market dynamics. Observed flows are typically subject to classification errors, which may induce serious bias. In this paper, some of the most common strategies, used to collect longitudinal information about labour force condition are reviewed, jointly with the modelling approaches developed to correct gross flows, when affected by classification errors. A general framework for estimating gross flows is outlined. Examples are given of different model specifications, applied to data collected with different strategies. Specifically, two cases are considered, i.e., gross flows from (i) the U.S. Survey of Income and Program Participation and (ii) the French Labour Force Survey, a yearly survey collecting retrospective monthly information.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024349
    Description:

    Measurement of gross flows in labour force status is an important objective of the continuing labour force surveys carried out by many national statistics agencies. However, it is well known that estimation of these flows can be complicated by nonresponse, measurement errors, sample rotation and complex design effects. Motivated by nonresponse patterns in household-based surveys, this paper focuses on estimation of labour force gross flows, while simultaneously adjusting for nonignorable nonresponse. Previous model-based approaches to gross flows estimation have assumed nonresponse to be an individual-level process. We propose a class of models that allow for nonignorable household-level nonresponse. A simulation study is used to show, that individual-level labour force gross flows estimates from household-based survey data, may be biased and that estimates using household-level models can offer a reduction in this bias.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024350
    Description:

    In longitudinal surveys, simple estimates of change, such as differences of percentages may not always be efficient enough to detect changes of practical relevance, especially in sub-populations. The use of models, which can represent the dependence structure of the longitudinal survey, can help to solve this problem. One of the main characteristics observed by the Swiss Labour Force Survey (SLFS) is the employment status. As the survey is designed as a rotating panel, the data from the SLFS are multivariate categorical data, where a large proportion of the response profiles are missing by design. The multivariate logistic model, introduced by Glonek and McCullagh (1995) as a generalisation of logistic regression, is attractive in this context, since it allows for dependent repeated observations and incomplete response profiles. We show that, using multivariate logistic regression, we can represent the complex dependence structure of the SLFS by a small number of parameters, and obtain more efficient estimates of change.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024351
    Description:

    To calculate price indexes, data on "the same item" (actually a collection of items narrowly defined) must be collected across time periods. The question arises whether such "quasi-longitudinal" data can be modeled in such a way as to shed light on what a price index is. Leading thinkers on price indexes have questioned the feasibility of using statistical modeling at all for characterizing price indexes. This paper suggests a simple state space model of price data, yielding a consumer price index that is given in terms of the parameters of the model.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024352
    Description:

    The National Population Health Survey (NPHS) is one of Statistics Canada's three major longitudinal household surveys providing an extensive coverage of the Canadian population. A panel of approximately 17,000 people are being followed up every two years for up to twenty years. The survey data are used for longitudinal analyses, although an important objective is the production of cross-sectional estimates. Each cycle panel respondents provide detailed health information (H) while, to augment the cross-sectional sample, general socio-demographic and health information (G) are collected from all members of their households. This particular collection strategy presents several observable response patterns for Panel Members after two cycles: GH-GH, GH-G*, GH-**, G*-GH, G*-G* and G*-**, where "*" denotes a missing portion of data. The article presents the methodology developed to deal with these types of longitudinal nonresponse as well as with nonresponse from a cross-sectional perspective. The use of weight adjustments for nonresponse and the creation of adjustment cells for weighting using a CHAID algorithm are discussed.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024353
    Description:

    This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024354
    Description:

    This article deals with an attempt to cross-tabulate two categorical variables, which were separately collected from two large independent samples, and jointly collected from one small sample. It was assumed that the large samples have a large set of common variables. The proposed estimation technique can be considered a mix between calibration techniques and statistical matching. Through calibration techniques, it is possible to incorporate the complex designs of the samples in the estimation procedure, to fulfill some consistency requirements between estimates from various sources, and to obtain fairly unbiased estimates for the two-way table. Through the statistical matching techniques, it is possible to incorporate a relatively large set of common variables in the calibration estimation, by means of which the precision of the estimated two-way table can be improved. The estimation technique enables us to gain insight into the bias generally obtained, in estimating the two-way table, by sole use of the large samples. It is shown how the estimation technique can be useful to impute values of the one large sample (donor source) into the other large sample (host source). Although the technique is principally developed for catagorical variables Y and Z, with a minor modification, it is also applicable for continuous variables Y and Z.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024355
    Description:

    Two sampling strategies have been proposed for estimating the finite population total for the most recent occasion, based on the samples selected over two occasions involving varying probability sampling schemes. Attempts have been made to utilize the data collected on a study variable, in the first occasion, as a measure of size and a stratification variable for selection of the matched-sample on the second occasion. Relative efficiencies of the proposed strategies have been compared with suitable alternatives.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024356
    Description:

    In the nonsurvey setting,"exact" confidence intervals for proportions calculated using the binomial distribution are frequently used instead of intervals based on approximate normality when the number of positive counts is small. With complex survey data, the binomial intervals are not applicable, so intervals based on the assumed approximate normality of the sample-weighted proportion are used, even if the number of positive counts is small. We propose a simple modification of the binomial intervals to be used in this situation. Limited simulations are presented that show the coverage probability of the proposed intervals is superior to that of the normality-based intervals, logit-transform intervals, and intervals based on a Poisson approximation. Applications are given involving the prevalence of Human Immunodeficiency Virus (HIV) based on data from the third National Health and Nutrition Examination Survey, and the proportion of users of cocaine based on data from the Hispanic Health and Nutrition Examination Survey.

    Release date: 1999-01-14

  • 9,850. Childhood asthma Archived
    Articles and reports: 82-003-X19980034137
    Geography: Canada
    Description:

    This article describes trends in the prevalence of asthma among children aged 0 to 14 from 1978/79 to 1994/95, and in hospital separations for asthma from 1974/75 to 1994/95. It also examines factors associated with childhood asthma.

    Release date: 1999-01-12
Reference (2,038)

Reference (2,038) (970 to 980 of 2,038 results)

  • Surveys and statistical programs – Documentation: 11-522-X19990015658
    Description:

    Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015660
    Description:

    There are many different situations in which one or more files need to be linked. With one file the purpose of the linkage would be to locate duplicates within the file. When there are two files, the linkage is done to identify the units that are the same on both files and thus create matched pairs. Often records that need to be linked do not have a unique identifier. Hierarchical record linkage, probabilistic record linkage and statistical matching are three methods that can be used when there is no unique identifier on the files that need to be linked. We describe the major differences between the methods. We consider how to choose variables to link, how to prepare files for linkage and how the links are identified. As well, we review tips and tricks used when linking files. Two examples, the probabilistic record linkage used in the reverse record check and the hierarchical record linkage of the Business Number (BN) master file to the Statistical Universe File (SUF) of unincorporated tax filers (T1) will be illustrated.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015662
    Description:

    As the availability of both health utilization and outcome information becomes increasingly important to health care researchers and policy makers, the ability to link person-specific health data becomes a critical objective. This type of linkage of population-based administrative health databases has been realized in British Columbia. The database was created by constructing an historical file of all persons registered with the health care system, and then by probabilistically linking various program files to this 'coordinating' file. The first phase of development included the linkage of hospital discharge data, physician billing data, continuing care data, data about drug costs for the elderly, births data and deaths data. The second phase of development has seen the addition data sources external to the Ministry of Health including cancer incidence data, workers' compensation data, and income assistance data.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015664
    Description:

    Much work on probabilistic methods of linkage can be found in the statistical literature. However, although many groups undoubtedly still use deterministic procedures, not much literature is available on these strategies. Furthermore there appears to exist no documentation on the comparison of results for the two strategies. Such a comparison is pertinent in the situation where we have only non-unique identifiers like names, sex, race etc. as common identifiers on which the databases are to be linked. In this work we compare a stepwise deterministic linkage strategy with the probabilistic strategy, as implemented in AUTOMATCH, for such a situation. The comparison was carried out on a linkage between medical records from the Regional Perinatal Intensive Care Centers database and education records from the Florida Department of Education. Social security numbers, available in both databases, were used to decide the true status of the record pair after matching. Match rates and error rates for the two strategies are compared and a discussion of their similarities and differences, strengths and weaknesses is presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015666
    Description:

    The fusion sample obtained by a statistical matching process can be considered a sample out of an artificial population. The distribution of this artificial population is derived. If the correlation between specific variables is the only focus the strong demand for conditional independence can be weakened. In a simulation study the effects of violations of some assumptions leading to the distribution of the artificial population are examined. Finally some ideas concerning the establishing of the claimed conditional independence by latent class analysis are presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015668
    Description:

    Following the problems with estimating underenumeration in the 1991 Census of England and Wales the aim for the 2001 Census is to create a database that is fully adjusted to net underenumeration. To achieve this, the paper investigates weighted donor imputation methodology that utilises information from both the census and census coverage survey (CCS). The US Census Bureau has considered a similar approach for their 2000 Census (see Isaki et al 1998). The proposed procedure distinguishes between individuals who are not counted by the census because their household is missed and those who are missed in counted households. Census data is linked to data from the CCS. Multinomial logistic regression is used to estimate the probabilities that households are missed by the census and the probabilities that individuals are missed in counted households. Household and individual coverage weights are constructed from the estimated probabilities and these feed into the donor imputation procedure.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015670
    Description:

    To reach their target audience efficiently, advertisers and media planners need information on which media their customers use. For instance, they may need to know what percentage of Diet Coke drinkers watch Baywatch, or how many AT&T customers have seen an advertisement for Sprint during the last week. All the relevant data could theoretically be collected from each respondent. However, obtaining full detailed and accurate information would be very expensive. It would also impose a heavy respondent burden under current data collection technology. This information is currently collected through separate surveys in New Zealand and in many other countries. Exposure to the major media is measured continuously, and product usage studies are common. Statistical matching techniques provide a way of combining these separate information sources. The New Zealand television ratings database was combined with a syndicated survey of print readership and product usage, using statistical matching. The resulting Panorama service meets the targeting information needs of advertisers and media planners. It has since been duplicated in Australia. This paper discusses the development of the statistical matching framework for combining these databases, and the heuristics and techniques used. These included an experiment conducted using a screening design to identify important matching variables. Studies evaluating and validating the combined results are also summarized. The following three major evaluation criteria were used; accuracy of combined results, statibility of combined results and the preservation of currency results from the component databases. The paper then discusses how the prerequisites for combining the databases were met. The biggest hurdle at this stage was the differences between the analysis techniques used on the two component databases. Finally, suggestions for developing similar statistical matching systems elsewhere will be given.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015672
    Description:

    Data fusion as discussed here means to create a set of data on not jointly observed variables from two different sources. Suppose for instance that observations are available for (X,Z) on a set of individuals and for (Y,Z) on a different set of individuals. Each of X, Y and Z may be a vector variable. The main purpose is to gain insight into the joint distribution of (X,Y) using Z as a so-called matching variable. At first however, it is attempted to recover as much information as possible on the joint distribution of (X,Y,Z) from the distinct sets of data. Such fusions can only be done at the cost of implementing some distributional properties for the fused data. These are conditional independencies given the matching variables. Fused data are typically discussed from the point of view of how appropriate this underlying assumption is. Here we give a different perspective. We formulate the problem as follows: how can distributions be estimated in situations when only observations from certain marginal distributions are available. It can be solved by applying the maximum entropy criterium. We show in particular that data created by fusing different sources can be interpreted as a special case of this situation. Thus, we derive the needed assumption of conditional independence as a consequence of the type of data available.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015674
    Description:

    The effect of the environment on health is of increasing concern, in particular the effects of the release of industrial pollutants into the air, the ground and into water. An assessment of the risks to public health of any particular pollution source is often made using the routine health, demographic and environmental data collected by government agencies. These datasets have important differences in sampling geography and in sampling epochs which affect the epidemiological analyses which draw them together. In the UK, health events are recorded for individuals, giving cause codes, a data of diagnosis or death, and using the unit postcode as a geographical reference. In contrast, small area demographic data are recorded only at the decennial census, and released as area level data in areas distinct from postcode geography. Environmental exposure data may be available at yet another resolution, depending on the type of exposure and the source of the measurements.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015676
    Description:

    As the population ages, a greater demand for long-term care services and, in particular, nursing homes is expected. Policy analysts continue to search for alternative, less costly forms of care for the elderly and have attempted to develop programs to delay or prevent nursing-home entry. Health care administrators required information for planning the future demand for nursing-home services. This study assesses the relative importance of predisposing, enabling, and need characteristics in predicting and understanding nursing-home entry.

    Release date: 2000-03-02