Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,450 to 3,460 of 10,894 results)

  • Articles and reports: 99-011-X2019001
    Description: The article presents suicide rates for the 2011-2016 time period among self-identifying First Nations, Métis, Inuit, and non-Indigenous people in private dwellings in Canada. It also explores the influence of socioeconomic factors in the disparity in risk of suicide between First Nations people, Métis, Inuit and non-Indigenous people in Canada. It uses the 2011 Canadian Census Health and Environment Cohort (CanCHEC), resulting from a record integration between the 2011 National Household Survey (NHS) and the Canadian Vital Statistics Database (CVSD).
    Release date: 2019-06-28

  • Stats in brief: 11-001-X201917920478
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2019-06-28

  • Stats in brief: 11-001-X201917921343
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2019-06-28

  • Articles and reports: 12-001-X201900200001
    Description:

    Development of imputation procedures appropriate for data with extreme values or nonlinear relationships to covariates is a significant challenge in large scale surveys. We develop an imputation procedure for complex surveys based on semiparametric quantile regression. We apply the method to the Conservation Effects Assessment Project (CEAP), a large-scale survey that collects data used in quantifying soil loss from crop fields. In the imputation procedure, we first generate imputed values from a semiparametric model for the quantiles of the conditional distribution of the response given a covariate. Then, we estimate the parameters of interest using the generalized method of moments (GMM). We derive the asymptotic distribution of the GMM estimators for a general class of complex survey designs. In simulations meant to represent the CEAP data, we evaluate variance estimators based on the asymptotic distribution and compare the semiparametric quantile regression imputation (QRI) method to fully parametric and nonparametric alternatives. The QRI procedure is more efficient than nonparametric and fully parametric alternatives, and empirical coverages of confidence intervals are within 1% of the nominal 95% level. An application to estimation of mean erosion indicates that QRI may be a viable option for CEAP.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200002
    Description:

    The National Agricultural Statistics Service (NASS) of the United States Department of Agriculture (USDA) is responsible for estimating average cash rental rates at the county level. A cash rental rate refers to the market value of land rented on a per acre basis for cash only. Estimates of cash rental rates are useful to farmers, economists, and policy makers. NASS collects data on cash rental rates using a Cash Rent Survey. Because realized sample sizes at the county level are often too small to support reliable direct estimators, predictors based on mixed models are investigated. We specify a bivariate model to obtain predictors of 2010 cash rental rates for non-irrigated cropland using data from the 2009 Cash Rent Survey and auxiliary variables from external sources such as the 2007 Census of Agriculture. We use Bayesian methods for inference and present results for Iowa, Kansas, and Texas. Incorporating the 2009 survey data through a bivariate model leads to predictors with smaller mean squared errors than predictors based on a univariate model.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200003
    Description:

    Merging available sources of information is becoming increasingly important for improving estimates of population characteristics in a variety of fields. In presence of several independent probability samples from a finite population we investigate options for a combined estimator of the population total, based on either a linear combination of the separate estimators or on the combined sample approach. A linear combination estimator based on estimated variances can be biased as the separate estimators of the population total can be highly correlated to their respective variance estimators. We illustrate the possibility to use the combined sample to estimate the variances of the separate estimators, which results in general pooled variance estimators. These pooled variance estimators use all available information and have potential to significantly reduce bias of a linear combination of separate estimators.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200004
    Description:

    Benchmarking lower level estimates to upper level estimates is an important activity at the United States Department of Agriculture’s National Agricultural Statistical Service (NASS) (e.g., benchmarking county estimates to state estimates for corn acreage). Assuming that a county is a small area, we use the original Fay-Herriot model to obtain a general Bayesian method to benchmark county estimates to the state estimate (the target). Here the target is assumed known, and the county estimates are obtained subject to the constraint that these estimates must sum to the target. This is an external benchmarking; it is important for official statistics, not just NASS, and it occurs more generally in small area estimation. One can benchmark these estimates by “deleting” one of the counties (typically the last one) to incorporate the benchmarking constraint into the model. However, it is also true that the estimates may change depending on which county is deleted when the constraint is included in the model. Our current contribution is to give each small area a chance to be deleted, and we call this procedure the random deletion benchmarking method. We show empirically that there are differences in the estimates as to which county is deleted and that there are differences of these estimates from those obtained from random deletion as well. Although these differences may be considered small, it is most sensible to use random deletion because it does not give preferential treatment to any county and it can provide small improvement in precision over deleting the last one benchmarking as well.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200005
    Description: We present an approach for imputation of missing items in multivariate categorical data nested within households. The approach relies on a latent class model that (i) allows for household-level and individual-level variables, (ii) ensures that impossible household configurations have zero probability in the model, and (iii) can preserve multivariate distributions both within households and across households. We present a Gibbs sampler for estimating the model and generating imputations. We also describe strategies for improving the computational efficiency of the model estimation. We illustrate the performance of the approach with data that mimic the variables collected in typical population censuses.
    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200006
    Description: This paper presents a new algorithm to solve the one-dimensional optimal stratification problem, which reduces to just determining stratum boundaries. When the number of strata H and the total sample size n are fixed, the stratum boundaries are obtained by minimizing the variance of the estimator of a total for the stratification variable. This algorithm uses the Biased Random Key Genetic Algorithm (BRKGA) metaheuristic to search for the optimal solution. This metaheuristic has been shown to produce good quality solutions for many optimization problems in modest computing times. The algorithm is implemented in the R package stratbr available from CRAN (de Moura Brito, do Nascimento Silva and da Veiga, 2017a). Numerical results are provided for a set of 27 populations, enabling comparison of the new algorithm with some competing approaches available in the literature. The algorithm outperforms simpler approximation-based approaches as well as a couple of other optimization-based approaches. It also matches the performance of the best available optimization-based approach due to Kozak (2004). Its main advantage over Kozak’s approach is the coupling of the optimal stratification with the optimal allocation proposed by de Moura Brito, do Nascimento Silva, Silva Semaan and Maculan (2015), thus ensuring that if the stratification bounds obtained achieve the global optimal, then the overall solution will be the global optimum for the stratification bounds and sample allocation.
    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200007
    Description:

    When fitting an ordered categorical variable with L > 2 levels to a set of covariates onto complex survey data, it is common to assume that the elements of the population fit a simple cumulative logistic regression model (proportional-odds logistic-regression model). This means the probability that the categorical variable is at or below some level is a binary logistic function of the model covariates. Moreover, except for the intercept, the values of the logistic-regression parameters are the same at each level. The conventional “design-based” method used for fitting the proportional-odds model is based on pseudo-maximum likelihood. We compare estimates computed using pseudo-maximum likelihood with those computed by assuming an alternative design-sensitive robust model-based framework. We show with a simple numerical example how estimates using the two approaches can differ. The alternative approach is easily extended to fit a general cumulative logistic model, in which the parallel-lines assumption can fail. A test of that assumption easily follows.

    Release date: 2019-06-27
Reference (2,038)

Reference (2,038) (990 to 1,000 of 2,038 results)

  • Geographic files and documentation: 21-601-M1995028
    Description:

    This paper outlines the process of delineating the agricultural land base (ecumene) in Canada based on data from the 1991 Census of Agriculture.

    Release date: 2000-01-27

  • Surveys and statistical programs – Documentation: 21-601-M1999042
    Description:

    This paper reconstructs the development and evolution of the Canadian agricultural statistical system. It describes the expanding and increasingly important role of administrative data, which is integrated into survey and census information in order to complement, supplement or replace survey information or to assist with frame maintenance.

    Release date: 2000-01-14

  • Surveys and statistical programs – Documentation: 21-601-M1998034
    Description:

    This paper describes the experiences, the issues and the expectations of the many different players involved in the implementation of document imaging for the Canadian Census of Agriculture.

    Release date: 2000-01-13

  • Surveys and statistical programs – Documentation: 75F0002M1999009
    Description:

    This paper describes the issues around updating the low income cut-offs as well as Statistics Canada's findings and proposes a course of action.

    Release date: 2000-01-12

  • Surveys and statistical programs – Documentation: 92-370-X
    Description:

    Series description

    This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and the Technical Reports - as well as geography reference products - GeoSuite and Reference Maps.

    Product description

    Technical Reports examine the quality of data from the 1996 Census, a large and complex undertaking. While considerable effort was taken to ensure high quality standards throughout each step, the results are subject to a certain degree of error. Each report looks at the collection and processing operations and presents results from data evaluation, as well as notes on historical comparability.

    Technical Reports are aimed at moderate and sophisticated users but are written in a manner which could make them useful to all census data users. Most of the technical reports have been cancelled, with the exception of Age, Sex, Marital Status and Common-law Status, Coverage and Sampling and Weighting. These reports will be available as bilingual publications as well as being available in both official languages on the Internet as free products.

    This report deals with coverage errors, which occured when persons, households, dwellings or families were missed by the 1996 Census or enumerated in error. Coverage errors are one of the most important types of error since they affect not only the accuracy of the counts of the various census universes but also the accuracy of all of the census data describing the characteristics of these universes. With this information, users can determine the risks involved in basing conclusions or decisions on census data.

    Release date: 1999-12-14

  • Surveys and statistical programs – Documentation: 92-371-X
    Description:

    This report deals with sampling and weighting, a process whereby certain characteristics are collected and processed for a random sample of dwellings and persons identified in the complete census enumeration. Data for the whole population are then obtained by scaling up the results for the sample to the full population level. The use of sampling may lead to substantial reductions in costs and respondent burden, or alternatively, can allow the scope of a census to be broadened at the same cost.

    Release date: 1999-12-07

  • Surveys and statistical programs – Documentation: 92-351-U
    Description:

    Series Description:

    This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and Technical Reports - as well as two geography reference products - GeoSuite and Reference Maps.

    Product Description:

    The 1996 Census Dictionary provides detailed information on all of the concepts, variables and geographic elements of the 1996 Census. Information provided for each variable includes a definition, the associated census questions, applicable response categories or classifications and special remarks, namely on historical aspects. Users should make use of this edition of the 1996 Census Dictionary for the most up-to-date information. This final edition is also available on our web site as a free downloadable product.

    Release date: 1999-10-25

  • Surveys and statistical programs – Documentation: 11-522-X19980015007
    Description:

    The National Population Health Survey (NPHS) is a family of surveys with multiple objectives, one of which is to provide information on a panel of people who will be followed over time to reflect the dynamic process of health and illness. Data for the first cycle of the NPHS - Households Survey were collected from June 1994 to June 1995, and were released in September 1995. Data for the second cycle were collected from June 1996 to August 1997. One of the primary outputs for the second cycle is a longitudinal master file. This paper will describe six major strategies that were developed to process the longitudinal master file.

    Release date: 1999-10-22

  • Notices and consultations: 11-522-X19980015010
    Description:

    In 1994, Statistics Canada introduced a new longitudinal social survey that collects information from about 23,000 children spread over 13,500 households. The objective of the National Longitudinal Survey of Children and Youth is to measure the development and well being of children until they reach adulthood. To this end, the survey gathers together information about the child, parents, neighbourhood as well as family and school environment. As a consequence, the data collected for each child, is provided by several respondents, from parents to teachers, a situation which contributes to an increased disclosure risk. In order to reach a balance between confidentiality and the analytical value of released data, the survey produces three different microdata files with more or less information. The master file that contains all the information is only available by means of remote access. Hence, researchers do not have direct access to the data, but send their request in the form of software programs that are submitted by Statistics Canada staff. The results are then vetted for confidentiality and sent back to the researchers. The presentation will be devoted to the various disclosure risks of such a survey and to the tools used to reduce those risks.

    Release date: 1999-10-22

  • Surveys and statistical programs – Documentation: 11-522-X19980015015
    Description:

    In epidemiology analysis of longitudinal data is commonly accepted as providing the most robust measures of association between putative risk and selected outcomes such as death or cancer. SMARTIE is a SAS application for efficient analysis of longitudinal data. Based on person days at risk, it can handle multiple exits from and re-entries to risk, and derives outcome measures such as survival rates. Standardised Mortality Ratios (SMRs) and Cancer Incidence Ratios (SIRs). Summary data can be produced in a format easily ported to any modelling package such as Stats 5.0. We discuss the background to its development, the overall program structure, its command language, and finally we say something about the organization of outputs. Findings from survival studies using the Longitudinal Study of the Office for National Statistics (ONS) are used to demonstrate features of SMARTIE. This study is based on one per cent of the population of England and Wales. It is continually updated with the addition of new members and with information from birth, death and cancer records, and from the census.

    Release date: 1999-10-22