Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (9,890 to 9,900 of 13,366 results)

  • Public use microdata: 82M0015X
    Description:

    The public use microdata file (PUMF) from the Canadian Community Health Survey (CCHS) - Healthy Aging provides cross-sectional estimates at provincial and national levels. Data are based on interviews with approximately 31,000 respondents aged 45 or older residing in households in all provinces.

    The survey focuses on the various factors that impact healthy aging, such as general health and well-being, physical activity, use of health care services, social participation, as well as work and retirement transitions.

    Release date: 2011-04-01

  • Table: 18-10-0144-01
    Frequency: Annual
    Description:

    This table contains 3 series, with data for years 1993 - 2007 (not all combinations necessarily have data for all years), and was last released on 2011-03-31. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), North American Industry Classification System (NAICS) (3 items: Total price; computer systems design and related services; Realized net multiplier; computer systems design and related services; Labour cost; computer systems design and related services ...).

    Release date: 2011-03-31

  • Table: 18-10-0192-01
    Frequency: Annual
    Description:

    This table contains 3 series, with data for years 2001 - 2007 (not all combinations necessarily have data for all years), and was last released on 2011-03-31. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), North American Industry Classification System (NAICS) (3 items: Total price; software publishers; Labour cost; software publishers; Realized net multiplier; software publishers ...).

    Release date: 2011-03-31

  • Table: 18-10-0193-01
    Frequency: Annual
    Description:

    This table contains 3 series, with data for years 2001 - 2007 (not all combinations necessarily have data for all years), and was last released on 2011-03-31. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), North American Industry Classification System (NAICS) (3 items: Total price; data processing; hosting and related services; Realized net multiplier; data processing; hosting and related services; Labour cost; data processing; hosting and related services ...).

    Release date: 2011-03-31

  • Table: 18-10-0194-01
    Frequency: Annual
    Description:

    This table contains 3 series, with data for years 2003 - 2007 (not all combinations necessarily have data for all years), and was last released on 2011-03-31. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), North American Industry Classification System (NAICS) (3 items: Total price; internet service providers; Labour cost; internet service providers; Realized net multiplier; internet service providers ...).

    Release date: 2011-03-31

  • Profile of a community or region: 16-002-X201100111420
    Description:

    The Fescue Grassland ecoregion profile is the sixth in a series of ecoregion profiles. The information presented includes a brief description of the physical setting, a snapshot of land cover and use as well as statistics on selected socio-economic characteristics of the region.

    Release date: 2011-03-23

  • Public use microdata: 12M0023X
    Description:

    This package was designed to enable users to access and manipulate the microdata file for Cycle 23 (2009) of the General Social Survey (GSS). It contains information on the objectives, methodology and estimation procedures, as well as guidelines for releasing estimates based on the survey.

    Cycle 23 collected data from persons 15 years and over living in private households in Canada, excluding residents of the Yukon, Northwest Territories and Nunavut; and full-time residents of institutions.

    The purpose of this survey is to better understand how Canadians perceive crime and the justice system and their experiences of victimization. The survey is designed to produce estimates of the extent to which persons are the victims of eight types of offences (assault, sexual assault, robbery, theft of personal property, breaking and entering, motor vehicle theft, theft of household property and vandalism); to examine the risk factors associated with victimization; to examine the rates of reporting to the police; and to evaluate the fear of crime and public perceptions of crime and the criminal justice system.

    Cycle 23 is the fifth cycle of the GSS dedicated to collecting data on victimization. Previous cycles had been conducted in 1988, 1993, 1999 and 2004. Cycle 23 includes most of the content from previous cycles as well as new content, added to reflect the society's emerging issues of crime prevention and Internet victimization.

    Release date: 2011-02-10

  • Table: 14-10-0143-01
    Frequency: Monthly
    Description:

    This table contains 7830 series, with data for years 1987 - 1995 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (29 items: St. John's; Newfoundland and Labrador; Saint John; New Brunswick; Saguenay; Quebec; Halifax; Nova Scotia ...), Labour force characteristics (10 items: Population; Full-time employment; Labour force; Employment ...), Sex (3 items: Both sexes; Males; Females ...), Age group (9 items: 15 years and over;25 years and over;25 to 44 years;15 to 24 years ...).

    Release date: 2011-01-28

  • Table: 14-10-0144-01
    Frequency: Annual
    Description:

    This table contains 7830 series, with data for years 1987 - 1995 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (29 items: St. John's; Newfoundland and Labrador; Halifax; Nova Scotia; Saint John; New Brunswick; Saguenay; Quebec ...), Labour force characteristics (10 items: Population; Labour force; Full-time employment; Employment ...), Sex (3 items: Both sexes; Males; Females ...), Age group (9 items: 15 years and over;25 to 44 years;25 years and over;15 to 24 years ...).

    Release date: 2011-01-28

  • Table: 14-10-0149-01
    Frequency: Monthly
    Description: Labour force survey estimates (LFS), employment by census metropolitan area based on 2001 census boundaries and National Occupational Classification for Statistics (NOC-S), 3-month moving average, unadjusted for seasonality.
    Release date: 2011-01-28
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (110 to 120 of 2,038 results)

  • Geographic files and documentation: 16-510-X2024002
    Description: This product contains specifications intended for users of the water yield geospatial files. This document provides important technical information for users and links to methodology.
    Release date: 2024-09-19

  • Surveys and statistical programs – Documentation: 89-653-X2024002
    Description: This guide is intended to provide a detailed review of both the 2022 IPS and IPS–NIS with respect to subject matter and methodological approaches. It is designed to help data users by serving as a guide to the concepts and measures of the survey as well as the technical details of the survey’s design, field work and data processing. This guide is meant to provide users with helpful information on how to use and interpret survey results. The discussion on data quality also allows users to review the strengths and limitations of the data for their particular needs.

    Chapter 1 of this guide provides an overview of the 2022 IPS and IPS–NIS by introducing the survey background and objectives. Chapter 2 outlines the survey’s themes and explains the key concepts and definitions used for the survey. Chapters 3 to 6 cover important aspects of the survey methodology, sampling design, data collection and processing. Chapters 7 and 8 review issues of data quality and caution users about comparing 2022 IPS or IPS–NIS data with data from other sources. Chapter 9 outlines the survey products available to the public, including data tables, analytical articles and reference material. The appendices provide a comprehensive list of survey indicators, extra coding categories and standard classifications used on both the IPS and the IPS–NIS. Lastly, a glossary of survey terms and information on confidence intervals is also provided.
    Release date: 2024-08-14

  • Surveys and statistical programs – Documentation: 73-506-G
    Description: The Guide to Employment Insurance Statistics (EIS) summarizes the survey methodology and data source and includes a dictionary of concepts and definitions used by the program.
    Release date: 2024-07-18

  • Surveys and statistical programs – Documentation: 98-20-00032021031
    Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. This video will provide an overview of the major links and products on the main page that are available to all users.
    Release date: 2024-07-10

  • Surveys and statistical programs – Documentation: 98-20-00032021032
    Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain where to find the most popular standard data product of the Census of Population, the 2021 Census Profile, and how to filter the data.
    Release date: 2024-07-10

  • Surveys and statistical programs – Documentation: 98-20-00032021033
    Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain how to add geographies in the 2021 Census Profile and to present the various downloading options to see the data.
    Release date: 2024-07-10

  • Surveys and statistical programs – Documentation: 72-212-X2024001
    Description: Data on income of census families, individuals and seniors are derived from the T1 Family File (T1FF). This file is based on information from the T1 form, Income Tax and Benefit Return, which Statistics Canada receives from Canada Revenue Agency (CRA) thirteen months after the end of the taxation year.
    Release date: 2024-06-27

  • Surveys and statistical programs – Documentation: 75-514-G
    Description: The Guide to the Job Vacancy and Wage Survey contains a dictionary of concepts and definitions, and covers topics such as survey methodology, data collection, processing, and data quality. The guide covers both components of the survey: the job vacancy component, which is quarterly, and the wage component, which is annual.
    Release date: 2024-06-18

  • Surveys and statistical programs – Documentation: 75-514-G2024001
    Description: The Guide to the Job Vacancy and Wage Survey contains a dictionary of concepts and definitions, and covers topics such as survey methodology, data collection, processing, and data quality.
    Release date: 2024-06-18

  • Notices and consultations: 41-20-0001
    Description: Engagement on the questions used to identify First Nations people, Métis and Inuit that are included on the Census of Population and on other Statistics Canada surveys is an important part of ensuring high quality and meaningful data are collected. The feedback received during these discussions are presented in these reports.
    Release date: 2024-05-29