Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,840 to 9,850 of 10,894 results)

  • Articles and reports: 12-001-X19980024348
    Description:

    Gross flows among labour force states are of great importance in understanding labour market dynamics. Observed flows are typically subject to classification errors, which may induce serious bias. In this paper, some of the most common strategies, used to collect longitudinal information about labour force condition are reviewed, jointly with the modelling approaches developed to correct gross flows, when affected by classification errors. A general framework for estimating gross flows is outlined. Examples are given of different model specifications, applied to data collected with different strategies. Specifically, two cases are considered, i.e., gross flows from (i) the U.S. Survey of Income and Program Participation and (ii) the French Labour Force Survey, a yearly survey collecting retrospective monthly information.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024349
    Description:

    Measurement of gross flows in labour force status is an important objective of the continuing labour force surveys carried out by many national statistics agencies. However, it is well known that estimation of these flows can be complicated by nonresponse, measurement errors, sample rotation and complex design effects. Motivated by nonresponse patterns in household-based surveys, this paper focuses on estimation of labour force gross flows, while simultaneously adjusting for nonignorable nonresponse. Previous model-based approaches to gross flows estimation have assumed nonresponse to be an individual-level process. We propose a class of models that allow for nonignorable household-level nonresponse. A simulation study is used to show, that individual-level labour force gross flows estimates from household-based survey data, may be biased and that estimates using household-level models can offer a reduction in this bias.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024350
    Description:

    In longitudinal surveys, simple estimates of change, such as differences of percentages may not always be efficient enough to detect changes of practical relevance, especially in sub-populations. The use of models, which can represent the dependence structure of the longitudinal survey, can help to solve this problem. One of the main characteristics observed by the Swiss Labour Force Survey (SLFS) is the employment status. As the survey is designed as a rotating panel, the data from the SLFS are multivariate categorical data, where a large proportion of the response profiles are missing by design. The multivariate logistic model, introduced by Glonek and McCullagh (1995) as a generalisation of logistic regression, is attractive in this context, since it allows for dependent repeated observations and incomplete response profiles. We show that, using multivariate logistic regression, we can represent the complex dependence structure of the SLFS by a small number of parameters, and obtain more efficient estimates of change.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024351
    Description:

    To calculate price indexes, data on "the same item" (actually a collection of items narrowly defined) must be collected across time periods. The question arises whether such "quasi-longitudinal" data can be modeled in such a way as to shed light on what a price index is. Leading thinkers on price indexes have questioned the feasibility of using statistical modeling at all for characterizing price indexes. This paper suggests a simple state space model of price data, yielding a consumer price index that is given in terms of the parameters of the model.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024352
    Description:

    The National Population Health Survey (NPHS) is one of Statistics Canada's three major longitudinal household surveys providing an extensive coverage of the Canadian population. A panel of approximately 17,000 people are being followed up every two years for up to twenty years. The survey data are used for longitudinal analyses, although an important objective is the production of cross-sectional estimates. Each cycle panel respondents provide detailed health information (H) while, to augment the cross-sectional sample, general socio-demographic and health information (G) are collected from all members of their households. This particular collection strategy presents several observable response patterns for Panel Members after two cycles: GH-GH, GH-G*, GH-**, G*-GH, G*-G* and G*-**, where "*" denotes a missing portion of data. The article presents the methodology developed to deal with these types of longitudinal nonresponse as well as with nonresponse from a cross-sectional perspective. The use of weight adjustments for nonresponse and the creation of adjustment cells for weighting using a CHAID algorithm are discussed.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024353
    Description:

    This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024354
    Description:

    This article deals with an attempt to cross-tabulate two categorical variables, which were separately collected from two large independent samples, and jointly collected from one small sample. It was assumed that the large samples have a large set of common variables. The proposed estimation technique can be considered a mix between calibration techniques and statistical matching. Through calibration techniques, it is possible to incorporate the complex designs of the samples in the estimation procedure, to fulfill some consistency requirements between estimates from various sources, and to obtain fairly unbiased estimates for the two-way table. Through the statistical matching techniques, it is possible to incorporate a relatively large set of common variables in the calibration estimation, by means of which the precision of the estimated two-way table can be improved. The estimation technique enables us to gain insight into the bias generally obtained, in estimating the two-way table, by sole use of the large samples. It is shown how the estimation technique can be useful to impute values of the one large sample (donor source) into the other large sample (host source). Although the technique is principally developed for catagorical variables Y and Z, with a minor modification, it is also applicable for continuous variables Y and Z.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024355
    Description:

    Two sampling strategies have been proposed for estimating the finite population total for the most recent occasion, based on the samples selected over two occasions involving varying probability sampling schemes. Attempts have been made to utilize the data collected on a study variable, in the first occasion, as a measure of size and a stratification variable for selection of the matched-sample on the second occasion. Relative efficiencies of the proposed strategies have been compared with suitable alternatives.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024356
    Description:

    In the nonsurvey setting,"exact" confidence intervals for proportions calculated using the binomial distribution are frequently used instead of intervals based on approximate normality when the number of positive counts is small. With complex survey data, the binomial intervals are not applicable, so intervals based on the assumed approximate normality of the sample-weighted proportion are used, even if the number of positive counts is small. We propose a simple modification of the binomial intervals to be used in this situation. Limited simulations are presented that show the coverage probability of the proposed intervals is superior to that of the normality-based intervals, logit-transform intervals, and intervals based on a Poisson approximation. Applications are given involving the prevalence of Human Immunodeficiency Virus (HIV) based on data from the third National Health and Nutrition Examination Survey, and the proportion of users of cocaine based on data from the Hispanic Health and Nutrition Examination Survey.

    Release date: 1999-01-14

  • 9,850. Childhood asthma Archived
    Articles and reports: 82-003-X19980034137
    Geography: Canada
    Description:

    This article describes trends in the prevalence of asthma among children aged 0 to 14 from 1978/79 to 1994/95, and in hospital separations for asthma from 1974/75 to 1994/95. It also examines factors associated with childhood asthma.

    Release date: 1999-01-12
Reference (2,038)

Reference (2,038) (450 to 460 of 2,038 results)

  • Notices and consultations: 11-017-X
    Description: Statistics Canada's Newsletter for Small and Medium-sized Businesses offers information to the business community about Statistics Canada's data and services. The newsletter also offers links to data releases of the Census and National Household Survey, videos, tutorials, media advisories, learning sessions and presentations.
    Release date: 2014-11-20

  • Surveys and statistical programs – Documentation: 13-605-X201400514088
    Description:

    An overview of the Canadian Government Finance Statistics (CGFS) framework; how it relates to other government statistics such as the Canadian System of Macroeconomic Accounts and the Public Accounts; and the new GFS data products available to users

    Release date: 2014-11-07

  • Notices and consultations: 13-605-X201400414107
    Description:

    Beginning in November 2014, International Trade in goods data will be provided on a Balance of Payments (BOP) basis for additional country detail. In publishing this data, BOP-based exports to and imports from 27 countries, referred to as Canada’s Principal Trading Partners (PTPs), will be highlighted for the first time. BOP-based trade in goods data will be available for countries such as China and Mexico, Brazil and India, South Korea, and our largest European Union trading partners, in response to substantial demand for information on these countries in recent years. Until now, Canada’s geographical trading patterns have been examined almost exclusively through analysis of Customs-based trade data. Moreover, BOP trade in goods data for these countries will be available alongside the now quarterly Trade in Services data as well as annual Foreign Direct Investment data for many of these Principal Trading Partners, facilitating country-level international trade and investment analysis using fully comparable data. The objective of this article is to introduce these new measures. This note will first walk users through the key BOP concepts, most importantly the concept of change in ownership. This will serve to familiarize analysts with the Balance of Payments framework for analyzing country-level data, in contrast to Customs-based trade data. Second, some preliminary analysis will be reviewed to illustrate the concepts, with provisional estimates for BOP-based trade with China serving as the principal example. Lastly, we will outline the expansion of quarterly trade in services to generate new estimates of trade for the PTPs and discuss future work in trade statistics.

    Release date: 2014-11-04

  • Surveys and statistical programs – Documentation: 11-522-X201300014258
    Description:

    The National Fuel Consumption Survey (FCS) was created in 2013 and is a quarterly survey that is designed to analyze distance driven and fuel consumption for passenger cars and other vehicles weighing less than 4,500 kilograms. The sampling frame consists of vehicles extracted from the vehicle registration files, which are maintained by provincial ministries. For collection, FCS uses car chips for a part of the sampled units to collect information about the trips and the fuel consumed. There are numerous advantages to using this new technology, for example, reduction in response burden, collection costs and effects on data quality. For the quarters in 2013, the sampled units were surveyed 95% via paper questionnaires and 5% with car chips, and in Q1 2014, 40% of sampled units were surveyed with car chips. This study outlines the methodology of the survey process, examines the advantages and challenges in processing and imputation for the two collection modes, presents some initial results and concludes with a summary of the lessons learned.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014259
    Description:

    In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014260
    Description: The Survey of Employment, Payrolls and Hours (SEPH) produces monthly estimates and determines the month-to-month changes for variables such as employment, earnings and hours at detailed industrial levels for Canada, the provinces and territories. In order to improve the efficiency of collection activities for this survey, an electronic questionnaire (EQ) was introduced in the fall of 2012. Given the timeframe allowed for this transition as well as the production calendar of the survey, a conversion strategy was developed for the integration of this new mode. The goal of the strategy was to ensure a good adaptation of the collection environment and also to allow the implementation of a plan of analysis that would evaluate the impact of this change on the results of the survey. This paper will give an overview of the conversion strategy, the different adjustments that were made during the transition period and the results of various evaluations that were conducted. For example, the impact of the integration of the EQ on the collection process, the response rate and the follow-up rate will be presented. In addition, the effect that this new collection mode has on the survey estimates will also be discussed. More specifically, the results of a randomized experiment that was conducted in order to determine the presence of a mode effect will be presented.
    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014269
    Description:

    The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014278
    Description:

    In January and February 2014, Statistics Canada conducted a test aiming at measuring the effectiveness of different collection strategies using an online self-reporting survey. Sampled units were contacted using mailed introductory letters and asked to complete the online survey without any interviewer contact. The objectives of this test were to measure the take-up rates for completing an online survey, and to profile the respondents/non-respondents. Different samples and letters were tested to determine the relative effectiveness of the different approaches. The results of this project will be used to inform various social surveys that are preparing to include an internet response option in their surveys. The paper will present the general methodology of the test as well as results observed from collection and the analysis of profiles.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014285
    Description:

    The 2011 National Household Survey (NHS) is a voluntary survey that replaced the traditional mandatory long-form questionnaire of the Canadian census of population. The NHS sampled about 30% of Canadian households and achieved a design-weighted response rate of 77%. In comparison, the last census long form was sent to 20% of households and achieved a response rate of 94%. Based on the long-form data, Statistics Canada traditionally produces two public use microdata files (PUMFs): the individual PUMF and the hierarchical PUMF. Both give information on individuals, but the hierarchical PUMF provides extra information on the household and family relationships between the individuals. To produce two PUMFs, based on the NHS data, that cover the whole country evenly and that do not overlap, we applied a special sub-sampling strategy. Difficulties in the confidentiality analyses have increased because of the numerous new variables, the more detailed geographic information and the voluntary nature of the NHS. This paper describes the 2011 PUMF methodology and how it balances the requirements for more information and for low risk of disclosure.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014290
    Description:

    This paper describes a new module that will project families and households by Aboriginal status using the Demosim microsimulation model. The methodology being considered would assign a household/family headship status annually to each individual and would use the headship rate method to calculate the number of annual families and households by various characteristics and geographies associated with Aboriginal populations.

    Release date: 2014-10-31