Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (980 to 990 of 26,768 results)

  • Data Visualization: 71-607-X2020018
    Description: This interactive dashboard allows the visualization of the age and gender structure of the population of Canada, provinces and territories. The data presented cover the period from 1971 to the most recent year. The dashboard shows the proportion of the total population by broad age group, the proportion of centenarians, the distribution of the population by age and gender, the average age, the number of people aged 15 to 64 per person aged 65 years and older and the gender ratio by age group. Data can be visualized for Canada or for a selected province or territory.
    Release date: 2026-09-23

  • Data Visualization: 71-607-X2022003
    Description: This interactive dashboard permits the visualization of various fertility indicators and how they have changed over time for Canada, provinces and territories. The dashboard shows the total fertility rate, the average age of childbearing, the fertility rate by age group of mother, the number of births and the associated annual change. Data can be visualized for Canada or for a selected province or territory by single year as well as historically.
    Release date: 2026-09-23

  • Data Visualization: 71-607-X2022016
    Description: This interactive dashboard allows the user to visualize the evolution of interprovincial migration over time as well as by province or territory of origin and destination. The dashboard shows the net interprovincial migrants between two provinces or territories from 1971/1972 to the most period year for which data is available. Users can select the provinces or territories of origin and destination of their choice using filters located at the top of the dashboard. The numbers of interprovincial migrants for every combination of province or territory of origin and destination can also be viewed, by selecting the period of interest using the appropriate filter.
    Release date: 2026-09-23

  • Data Visualization: 71-607-X2022017
    Description: This interactive dashboard allows the user to visualize the evolution of interprovincial migration over time as well as by province or territory, by age group and by gender. The dashboard shows the levels of in-migrants, out-migrants and net interprovincial migration. It also presents trends in the form of rates to facilitate comparisons between provinces and territories and between age groups. The data presented covers the period from 1971/1972 to the most recent period.
    Release date: 2026-09-23

  • Data Visualization: 71-607-X2023021
    Description: This interactive dashboard visualizes the popularity of baby names over time for Canada. The dashboard displays the top 20 baby names by selected year for both boys and girls. It is also possible to search for a particular first name by sex at birth to see the historical evolution of the first name in terms of frequency, the proportion of children with the chosen name and the annual rank.
    Release date: 2026-09-23

  • Table: 13-10-0975-01
    Frequency: Occasional
    Description: This table includes average daily load per capita estimates (in milligrams per one thousand people per day) of drug metabolites present in wastewater in select Canadian cities, by collection month.
    Release date: 2026-09-22

  • Table: 23-10-0258-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    Quarterly civil aviation operating statistics (passengers, goods carried (kilograms), passenger-kilometres, passenger tonne-kilometres, goods tonne-kilometres, total tonne-kilometres, hours flown) for scheduled and charter services both separately and combined, for Canadian air carriers, Levels I and II combined. For scheduled services only, operating statistics also include available seat-kilometres, passenger load factor (percent), available tonne-kilometres and weight load factor (percent). Data are expressed in thousands, except for the number of carriers included, which is expressed in full.

    Release date: 2026-09-22

  • Table: 23-10-0259-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    Quarterly civil aviation operating statistics (passengers, goods carried (kilograms), passenger-kilometres, passenger tonne-kilometres, goods tonne-kilometres, total tonne-kilometres, hours flown) by sector (total domestic and international, domestic, international, transborder (Canada - United States) and other international). Data are for Canadian air carriers, Levels I and II combined. All data are expressed in thousands.

    Release date: 2026-09-22

  • Table: 23-10-0260-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    Quarterly civil aviation financial statistics (total, operating revenue for scheduled and charter services both separately and combined, passenger revenue and goods revenue for both scheduled and charter services, all other operating revenue, total, operating expenses, turbo fuel expenses, wages, salaries and benefits paid, all other operating expenses, net income (loss), operating income (loss), non-operating income (loss) and average number of employees. Data are for Canadian air carriers, Levels I and II combined. All data are expressed in thousands of dollars, except for the average number of employees, which is expressed in full.

    Release date: 2026-09-22

  • Table: 23-10-0261-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    Quarterly civil aviation financial performance indicators (operating ratio, operating profit margin and profit margin), for Canadian air carriers, Levels I and II combined. The operating profit margin and profit margin are expressed in percent.

    Release date: 2026-09-22
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (220 to 230 of 2,038 results)

  • Surveys and statistical programs – Documentation: 98-20-00032021004
    Description: This video is one of a series of videos related to census geography in the context of the activities of the 2021 Census and previous censuses. The objective of this video is to help users at all levels quickly understand key information derived from data with the help of powerful and dynamic tools like GeoSuite, GeoSearch and the Census Program Data Viewer.
    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 98-20-00032021005
    Description: This video is designed to provide viewers with a basic understanding of how census concepts (e.g., focuses, population of interest and variables) are logically structured and to show different ways of looking at data. The knowledge of these concepts is used when analyzing or creating census data products.
    Release date: 2022-02-09

  • Geographic files and documentation: 12-571-X
    Description: The Standard Geographical Classification (SGC) provides a systematic structure for classifying Canada's geographic areas. It is the official classification system used for the Census of Population and other Statistics Canada surveys.

    The classification is presented in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume I describes the classification and related standard geographic areas and place names. It presents the names and codes for the geographical regions of Canada, provinces and territories, census divisions and census subdivisions, as well as those of the geographic regions that make up the different variants of the classification. It provides information on changes between the current version of the SGC and the previous one, including changes in name, type or code, and indicates the correspondence between the new and old codes. Volume II contains reference maps.

    Volume II. Reference Maps is available (12-572-X).
    Release date: 2022-02-09

  • Geographic files and documentation: 12-572-X
    Description: The Standard Geographical Classification (SGC) provides a systematic classification structure that categorizes all of the geographic area of Canada. The SGC is the official classification used in the Census of Population and other Statistics Canada surveys.

    The classification is organized in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume II contains reference maps showing boundaries, names, codes and locations of the geographic areas in the classification. The reference maps show census subdivisions, census divisions, census metropolitan areas, census agglomerations, census metropolitan influenced zones and economic regions. Definitions for these terms are found in Volume I, The Classification. Volume I describes the classification and related standard geographic areas and place names.

    The maps in Volume II can be downloaded in PDF format from our website.

    Release date: 2022-02-09

  • Geographic files and documentation: 92-142-X
    Description: This interactive mapping application facilitates the search and visualization of geographic regions in Canada for which Census of Population data are available. GeoSearch also displays geographic regions related to the selected region, as well as links to census data products, analytical products, and maps associated with that region.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-143-G
    Description: This guide describes the content and applications of the product, as well as providing information on data quality, record layouts, and methodology.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-146-X
    Description:

    The Census Tract Reference Maps, by Census Metropolitan Areas or Census Agglomerations cover all census metropolitan areas and the census agglomerations in the census tract program. The maps display boundaries and names of census tracts and census subdivisions, designated places and their names, as well as core, secondary core, fringe and rural areas within census metropolitan areas or census agglomerations. Inset maps are available to show detail for the more concentrated areas. The maps also display street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size. Embedded links enable users to link to respective dissemination area by census tract maps when viewing the maps on the Internet.

    A reference guide is available (92-143-G).

    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 92-150-G
    Description: his reference guide is intended for users of the GeoSuite data package available in the Census of Population GeoSuite (92-150-X). It provides an overview of the general methodology used to create this dataset, as well as important technical information.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-150-X
    Description: GeoSuite is a powerful interactive search tool based on Census of Population geographic areas. It allows users to search and retrieve data, explore and obtain information about geographic areas, and produce data tables. The information available includes the population and dwelling counts from the 2006 census to the most recent, as well as representative point coordinates, land area, geographic codes, and names.

    A reference guide is available (GeoSuite Data Package, Reference Guide, 92-150-G).
    Release date: 2022-02-09

  • Geographic files and documentation: 92-151-G
    Description:

    The reference guide provides an overview of the Geographic Attribute File product, including the general methodology used to create it.

    Release date: 2022-02-09