Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (9,780 to 9,790 of 13,366 results)

  • Table: 14-10-0235-01
    Frequency: Monthly
    Description:

    This table contains 1398 series, with data for years 1961 - 1983 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (71 items: Corner Brook; Newfoundland and Labrador; Newfoundland and Labrador; Canada; Atlantic provinces ...), Standard Industrial Classification, 1960 (SIC) (281 items: Industrial composite; Forestry services; Logging; Forestry ...).

    Release date: 2012-03-30

  • Table: 14-10-0236-01
    Frequency: Monthly
    Description:

    This table contains 1398 series, with data for years 1961 - 1985 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (71 items: Canada; Atlantic provinces; Corner Brook; Newfoundland and Labrador; Newfoundland and Labrador ...), Standard Industrial Classification, 1960 (SIC) (281 items: Industrial composite; Forestry services; Logging; Forestry ...).

    Release date: 2012-03-30

  • Table: 14-10-0237-01
    Frequency: Monthly
    Description:

    This table contains 1339 series, with data for years 1961 - 1983 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (62 items: Canada; Newfoundland and Labrador; Atlantic provinces ...), Wage earners (2 items: Average weekly hours; Average hourly earnings ...), Standard Industrial Classification, 1960 (SIC) (124 items: Mining; including milling; Metals; Gold; Copper-gold-silver ...).

    Release date: 2012-03-30

  • Table: 14-10-0228-01
    Frequency: Annual
    Description:

    This table contains 9860 series, with data for years 1983 - 2000 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (13 items: Newfoundland and Labrador; Canada; Prince Edward Island; Nova Scotia ...), Overtime (2 items: Including overtime; Excluding overtime ...), Estimates (2 items: Average weekly hours; Average hourly earnings ...), Standard Industrial Classification, 1980 (SIC) (283 items: Industrial aggregate excluding unclassified establishments; Logging and forestry industries; Logging industry; Goods producing industries ...).

    Release date: 2012-03-30

  • Thematic map: 73-002-X
    Description:

    Set of maps presenting Employment Insurance Statistics. The maps show the percentage change in the number of people receiving regular Employment Insurance benefits in the last 12 months, by Census Metropolitan Areas (CMAs) and Census Agglomerations (CAs), using 2001 Census geography. Data are also shown in a tabular format.

    Release date: 2012-03-22

  • Table: 89-649-X
    Description:

    This publication offers national highlights as well as data tables from the 2010 Canada Survey of Giving, Volunteering, and Participating (CSGVP). This survey was undertaken to better understand how Canadians support individuals and communities on their own or through their involvement with charitable and non-profit organizations. For this survey, thousands of Canadians aged 15 and over were asked how they: gave money and other resources to individuals and to organizations; and volunteered time to help others and to enhance their communities. This publication will provide an overview of national estimates and highlights as well as national, provincial and territorial indicators that provide a measure of Canada's volunteer activities and charitable contributions in Canada.

    Release date: 2012-03-21

  • Public use microdata: 71M0016X
    Description:

    The Public Service Employee Survey was designed to solicit the views of Public Service employees on their work environment and overall job satisfaction. Employees expressed their opinions on their work units, their communications with their supervisors, skills and career aspirations, client services and labour management relations. General information such as age, gender, years of service and province of work were collected and questions were asked on specific themes such as staffing fairness, official languages, health and safety, harassment and discrimination and retention issues. The results were aggregated at the department and Public Service-wide levels. The survey ensures a measurement capacity between the 1999, 2002 and 2005 questionnaires.

    In 2008, the 2005 questionnaire was used as the basis for the survey. New questions were added to construct an employee engagement model that will be used to evaluate each organization. As well, the scale of the response category was increased from 4 to 5 to include a neutral category.

    Release date: 2012-03-19

  • Table: 87-009-X
    Description: This product provides an overview of trends in the film, television and video post-production industry. It provides users with information to monitor growth of the industry, measure performance, monitor programs and review policies. The tables focus on financial and operating data.
    Release date: 2012-03-16

  • Table: 23-10-0202-01
    Geography: Canada, Province or territory
    Frequency: Monthly
    Description:

    This table contains 74 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Canada; Newfoundland and Labrador; Nova Scotia; ...), Operating statistics (8 items: Establishments reporting; Passengers carried, urban, suburban services; Passenger revenue, urban, suburban services; Vehicle distance run, all services; ...).

    Release date: 2012-03-15

  • Table: 21-206-X
    Description: This publication provides information on sources and levels of farm and off-farm income for operators by province, type of farm (based on the North American Industry Classification System) and revenue class.

    Distributional tables on income of operators are also presented. This publication also includes data highlights and information on concepts, methods and data quality. A relevant article on the story emanating from the data is also featured.

    Data from Canada Revenue Agency's income tax returns of farmers operating unincorporated and incorporated farms provide the statistical basis for this publication.

    Release date: 2012-03-15
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (950 to 960 of 2,038 results)

  • Surveys and statistical programs – Documentation: 75F0010X
    Description:

    The publication guides the user through the vast array of labour market and income data sources. It offers detailed descriptions of the various surveys, including the data collected. A summary chart gives snapshot information for comparisons.

    Release date: 2000-09-13

  • Surveys and statistical programs – Documentation: 31-532-G
    Description:

    This practical and informative guide for manufacturers and exporters will assist in navigating through numerous Statistics Canada products and services. In addition, some recent articles and research papers have been highlighted.

    Release date: 2000-07-26

  • Surveys and statistical programs – Documentation: 75F0002M2000010
    Description:

    This report explains the concept of income and provides definitions of the various sources of income and derived income variables. It also documents the various aspects of the census that can have an impact on census income estimates.

    Release date: 2000-07-26

  • Surveys and statistical programs – Documentation: 62F0026M2000001
    Description:

    This guide presents information of interest to users of data from the Survey of Household Spending. Data are collected via personal interviews conducted in January, February and March after the reference year using a paper questionnaire. Information is gathered about the spending habits, dwelling characteristics and household equipment of Canadian households during the reference year. The survey covers private households in the ten provinces and three territories. (The three territories are surveyed every second year.)

    This guide includes definitions of survey terms and variables and descriptions of survey methodology and data quality. There is also a section describing the various statistics that can be created using expenditure data (e.g., budget share, market share, and aggregates).

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 62F0026M2000002
    Description:

    Starting with the 1997 survey year, the Family Expenditure Survey was replaced by the Survey of Household Spending (SHS). This note provides information to users and prospective users of data from the SHS about the differences between the SHS and the former Family Expenditure Survey. Topics covered include sample size, number of questions, coverage, and concepts.

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 62F0026M2000003
    Description:

    Starting with the 1997 survey year, the Household Facilities and Equipment Survey was replaced by the Survey of Household Spending (SHS). This note provides information to users and prospective users of data from the SHS about the differences between the SHS and the former Household Facilities and Equipment Survey. Topics covered include sample size, weighting, collection method, reference period, and concepts.

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 75F0033M2000003
    Geography: Canada
    Description:

    This report provides an overview of an inventory of publicly available data on the nonprofit sector.

    Release date: 2000-06-12

  • Surveys and statistical programs – Documentation: 89F0120X
    Description:

    Direct measures of skill attainment such as the International Adult Literacy Survey are used to assess the importance of educational outcome skills such as literacy in determining labour market outcomes such as earnings. Policy makers also use them to direct resources most efficiently. However, these skill measures are the product of complex statistical procedures. This paper examines the mathematical robustness of the International Adult Literacy Survey measures against other possibilities in estimating the impact of literacy on individual earnings.

    Release date: 2000-06-02

  • Notices and consultations: 13-605-X20000018519
    Description:

    With the release of the first quarter 2000 of the National Income and Expenditure Accounts the sectoring of federal and provincial government, non-autonomous pension plans has changed. These pension plans are now part of the personal sector. Previously these plans were included in either the federal or provincial government sector accounts.

    Release date: 2000-05-31

  • Surveys and statistical programs – Documentation: 82F0081X
    Description:

    The Cancer Record is a newsletter for cancer registries in Canada. Its main purpose is to improve the quality and consistency of data submitted to the Canadian Cancer Registry. The goals of the newsletter are to establish and continue communication among cancer registry personnel, establish a mechanism for identifying and resolving coding or reporting inconsistencies in the national registry and update cancer registries regarding the continued development at the national level.

    Release date: 2000-05-24