Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,490 to 9,500 of 10,894 results)

  • 9,491. Primary Metal Industries Archived
    Journals and periodicals: 41-250-X
    Description:

    Data from the Annual Survey of manufactures (ASM) is the prime source for this publication. The results of the 1997 survey are supplemented by data from sub-annual Statistics Canada surveys and major economic indicators.

    Release date: 2000-04-27

  • Articles and reports: 63-016-X19990044946
    Geography: Canada
    Description:

    This article will examine how food service providers and food stores have competed for Canadians' food dollars in the 1990s, and then look at how this intense competition has affected both industries. Each industry has evolved with the objective of improving efficiency and gaining additional market share.

    Release date: 2000-04-14

  • Articles and reports: 87-003-X20000024939
    Geography: Canada
    Description:

    In this article, we describe, first the changes that have occurred in the family structure. An overview of the demographic changes that have marked the period from 1980 to 1998, will shed some light on the factors that seem to influence the travel market at the start of the millenium. We then paint a picture of travel by Canadian families in 1998 compared to that of adults travelling alone. In this latter section, we present some of the strategies the tourst industry uses to adapt to these new markets.

    Release date: 2000-04-12

  • Articles and reports: 75F0002M2000003
    Description:

    This article analyzes the longitudinal aspect of involuntary part-time work from 1993 to 1996 using data from the Survey of Labour and Income Dynamics (SLID).

    Release date: 2000-04-11

  • Journals and periodicals: 34-251-X
    Description:

    The latest issue contains the article "Performance of the textile products industries. by Yasmin Sheikh. The business climate under which the manufacturing sector has been operating has evolved particularly in the last decade. Within manufacturing, certain industries have responded better than others to the challenge brought about by advancement in technology and increased globalization. Textile products was the fastest growing industry in terms of Gross Domestic Product (GDP) from 1961 to 1987 compared to the overall economy, the manufacturing sector and closely related Primary Textile Industries. However, this industry's GDP declined sharply between 1988 and 1992. Except for 1996, the industry again experienced growth from 1993 onwards but its GDP growth index is well below its peak in 1987.

    Results of the Annual Survey of Manufacturers show that manufacturing shipments of textile products in constant 1992 dollars peaked in 1988 and have since declined. This paper reviews data from this survey for the period 1988 to 1997 to underline the changes in the size, structure and performance of this industry and how it has fared in comparison to the Primary Textiles Industry. It also highlights current developments using results of the Monthly Survey of Manufacturers.

    Release date: 2000-04-06

  • Journals and periodicals: 45-250-X
    Description:

    The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

    This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

    Release date: 2000-04-06

  • Journals and periodicals: 32-251-X
    Description:

    The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.

    Release date: 2000-04-01

  • Articles and reports: 82-003-X19990034931
    Description:

    Life expectancy in Canada is excellent -among the highest in the world.

    Over 90% of Canada's 136 health regions, containing about 99% of the total population, have life expectancy values within 2.8 years of the overall Canada value.

    The health regions with the lowest life expectancies tend to be in remote regions or northern parts of certain provinces and have significant Aboriginal populations. The lower life expectancies are not associated with any one specific cause; rather, the mortality rates in these regions are higher for most causes of death.

    Mortality patterns are similar for men and women in the low life expectancy health regions.

    Most health regions with higher life expectancy are in and west of Ontario. Mortality rates are generally at least 10% lower for all causes than the Canadian average.

    Consistent with other measures of the health of the population, there is an association with socioeconomic factors: life expectancy increases as the rate of unemployment decreases and the level of education increases.

    Release date: 2000-03-31

  • Articles and reports: 82-003-X19990034932
    Geography: Canada
    Description:

    The 20th century saw a dramatic decline in infant mortality in Canada and an accompanying decline in regional disparities in infant mortality.

    Income-related differences in infant mortality diminished substantially; however, by 1996, rates in the poorest neighbourhoods were still two-thirds higher than those in the richest neighbourhoods.

    Infant mortality in Canada's poorest neighbourhoods is now significantly lower than the national rate for the United States. However, it is less impressive than what has been attained in parts of Europe, such as France and Sweden. The infant mortality rate in Canada's richest neighbourhoods is currently only about as low as the national rate for Sweden.

    In recent years in Canada, income-related disparities in infant mortality have ceased to diminish, although regional disparities have continued to decline.

    Since 1971, Canada has seen dramatic reductions in child mortality due to most external causes of death (accidents, poisoning and violence). Nevertheless, there has been an increase in suicides among children.

    Most children in Canada are in very good health. However, socioeconomic differences are evident from an early age. The children of parents with a low level of education are more likely to have poorer perceived health and are less likely to enjoy unbroken good health.

    Release date: 2000-03-31

  • 9,500. Health in midlife Archived
    Articles and reports: 82-003-X19990034933
    Geography: Canada
    Description:

    Most Canadians enjoy good health in the middle years, although, not surprisingly, health declines with age.

    The prevalence of several chronic conditions and activity limitations due to a health problem has declined for those aged 45 to 64 over the past 20 years. At the same time, the prevalence of asthma and migraine headaches has increased for women aged 45 to 64; diabetes and asthma have increased among men in the same age group.

    Lower levels of education and income are associated with an increased likelihood of a decline in health and with chronic illness.

    Release date: 2000-03-31
Reference (2,038)

Reference (2,038) (290 to 300 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-26-0003
    Description:

    Statistics Canada Data Strategy (SCDS) provides a course of action for managing and leveraging the agency’s data assets to ensure their optimal use and value while maintaining public trust. As Statistics Canada is the nation’s trusted provider of high-quality data and information to support evidence-based policy and decision making, the SCDS also naturally includes the agency’s plan for providing support and data expertise to other government organizations (federal, provincial and territorial), non-governmental organizations, the private sector, academia, and other national and international communities).

    The SCDS provides a roadmap for how Statistics Canada will continue to govern and manage its valuable data assets as part of its modernization agenda and in alignment with and response to other federal government strategies and initiatives. These federal strategies include the Data Strategy for the Federal Public Service, Canada’s 2018-2020 National Action Plan on Open Government, and the Treasury Board Secretariat Digital Operations Strategic Plan: 2018-2022.

    Release date: 2020-04-30

  • Surveys and statistical programs – Documentation: 34-26-0002
    Description:

    As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

    This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

    Release date: 2020-04-01

  • Surveys and statistical programs – Documentation: 37-20-00012020001
    Description:

    This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 37-20-00012020002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 89-20-00052020009
    Description: In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.
    Release date: 2020-03-03

  • Surveys and statistical programs – Documentation: 89-20-00052020008
    Description: This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.
    Release date: 2020-02-19

  • 297. Creating Vector Data Archived
    Surveys and statistical programs – Documentation: 89-20-00052020006
    Description: In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

    We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

    In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052020007
    Description: This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.
    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052019001
    Description: In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020001
    Description: This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.
    Release date: 2020-02-17