Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (9,260 to 9,270 of 13,366 results)

  • Table: 16F0023X
    Description:

    This report presents results and analysis of two surveys: the Waste Management Industry Survey: Business Sector, and the Waste Management Industry Survey: Government Sector.

    Information on the physical quantities of non-hazardous and hazardous waste collected, disposed of and recycled was gathered from these surveys.

    The first survey covered those operations and facilities owned by businesses that provided waste management services while the second covered operations and facilities owned by Canadian local governments and other local bodies engaged in the delivery of waste management services.

    Information on the employment and financial characteristics of businesses and local governments involved in the supply of these services is also reported.

    Release date: 2013-08-21

  • Table: 36-10-0093-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 726 series, with data for years 1999 - 2009 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), North American Industry Classification System (NAICS) (11 items: Other goods producing industries;Total; services producing industries;Manufacturing;Total; goods producing industries ...), Receipts and payments (2 items: Receipts;Payments ...), Commercial services by category (33 items: Total; commercial services;Insurance services;Construction services;Communications services ...).
    Release date: 2013-08-16

  • Table: 45-004-X
    Description: This publication contains data on the supply and demand of refined petroleum products in Canada including refinery inputs, production, imports and exports, domestic sales and inventory levels by province and region. Data is available for propane and propane mixes, butane and butane mixes, petrochemical feedstocks, naphtha specialties, aviation gasoline, motor gasoline, aviation turbo fuel kerosene and naphtha types, stove oil kerosene, diesel fuel, light fuel oil, heavy fuel oil, asphalt, coke, lubes and greases, and still gas. It also includes notes and definitions.
    Release date: 2013-08-16

  • Table: 34-10-0098-01
    Frequency: Monthly
    Description:

    This table contains data described by the following dimensions (Not all combinations are available): Geography (69 items: Saguenay; Quebec; Census metropolitan areas; Census metropolitan areas and large urban areas; Calgary; Alberta ...), Type of unit (2 items: Single-detached and semi-detached units; Row; apartment and other unit types ...).

    Release date: 2013-08-02

  • Table: 34-10-0101-01
    Frequency: Monthly
    Description:

    This table contains data described by the following dimensions (Not all combinations are available): Geography (13 items: Canada; Prince Edward Island; Newfoundland and Labrador; Nova Scotia ...), Estimates (2 items: Dwelling units; Dollars ...), Type of residential category (2 items: New residential construction; Existing residential properties ...), Type of mortgage loan approvals (3 items: Total; mortgage loan approvals; Conventional; National Housing Act ...), Type of housing (3 items: Total; single-detached and multiples; Single-detached; Multiples ...).

    Release date: 2013-08-02

  • Table: 36-10-0209-01
    Geography: Canada
    Frequency: Annual
    Description: Hours worked and labour compensation by type of worker and North American Industry Classification System (NAICS), annual (dollars).
    Release date: 2013-08-01

  • Table: 36-10-0210-01
    Geography: Canada
    Frequency: Annual
    Description: Investment, capital stock and capital services of physical assets, by North American Industry Classification System (NAICS), annual (dollars)
    Release date: 2013-08-01

  • Table: 41-019-X
    Description: This publication presents the results of four monthly surveys that measure selected outputs of the Canadian Steel manufacturing industry. These surveys include: Steel Primary Forms, Steel Castings and Pig Iron; Ingots and Rolled Steel products; Steel Pipe and Tubing; and Steel Wire and Specified Wire products. The data are presented for both the reference month and year-to-date.

    Section I presents monthly production and shipments in metric tonnes for steel primary forms and pig iron. It also includes monthly data on net shipments in metric tonnes for rolled steel products by consuming industry.

    Section II provides monthly data on the production and shipments in metric tonnes of steel pipe and tubing. Shipments of total Steel pipe and tubing are also available for own use, for the domestic and export markets.

    Section III includes statistics on the production and shipments of steel wire and specified wire products. It also separates shipments for the domestic and export markets.

    Release date: 2013-07-23

  • Table: 13-10-0397-01
    Geography: Canada
    Frequency: Occasional
    Description: Number of deaths and age-standardized mortality rate, by income adequacy quintile and sex, for Canada only.
    Release date: 2013-07-17

  • Table: 25-10-0053-01
    Frequency: Monthly
    Description: This table contains 43 series, with data for years 1989 - 2013 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Type of natural gas liquids and liquefied petroleum gases (4 items: Total natural gas liquids and liquefied petroleum gases; Propane; Butane; Ethane ...) Supply and demand (11 items: Refinery production; Total supply; Gas plant production; Imports ...).
    Release date: 2013-07-17
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (30 to 40 of 2,038 results)

  • Geographic files and documentation: 82-402-X
    Description: Health regions are defined by the provinces and represent administrative areas or regions of interest to health authorities. This product contains correspondence files (linking health regions to latest Census geographic codes) and digital boundary files. User documentation provides an overview of health regions, sources, methods, limitations and product description (file format and layout).

    In addition to the geographic files, this product also includes Census data (basic profile) for health regions.

    Release date: 2026-04-30

  • Surveys and statistical programs – Documentation: 11-633-X2026002
    Description: Recent changes in Canada’s immigration levels have heightened interest in understanding how immigration affects housing demand. This article develops a methodological framework for projecting housing use associated with permanent residents (PRs) and non-permanent residents (NPRs) under alternative immigration scenarios. The framework applies observed per capita housing use rates from the Census of Population to estimate incremental housing use by tenure over time.
    Release date: 2026-04-24

  • Notices and consultations: 11-635-X
    Description: Departmental Plans (DP) are individual expenditure plans for each department and agency. These reports provide increased levels of detail over a three-year period on an organization's main priorities by strategic outcome, program and planned/expected results, including links to related resource requirements presented in the Main Estimates. In conjunction with the Main Estimates, Departmental Plans serve to inform members of Parliament on planned expenditures of departments and agencies, and support Parliament's consideration of supply bills. The DPs are typically tabled soon after the Main Estimates by the President of the Treasury Board.
    Release date: 2026-03-13

  • Surveys and statistical programs – Documentation: 45-20-0004
    Description: The publication features products and data highlights that focus on rural areas of Canada or that have a rural dimension present. Rural areas are typically areas outside of Canada's Census Metropolitan Areas (CMA) and Census Agglomerations (CA). The publication also includes explanatory notes on key concepts and definitions.
    Release date: 2026-03-13

  • Surveys and statistical programs – Documentation: 11-633-X2026001
    Description: This report defines key concepts related to area-level analysis and introduces area-level measures developed and utilized at Statistics Canada for health analysis. It also provides a decision-making framework and practical recommendations to help researchers select appropriate methods. The goal is to guide readers on when area-level analysis is appropriate and what type of area-level measure is suitable to achieve research objectives.
    Release date: 2026-03-05

  • Notices and consultations: 89-26-0007
    Description: This report describes how Statistics Canada administers its responsibilities of the Access to Information Act. It is prepared and submitted in accordance with section 94(1) of the Act and is tabled in Parliament.
    Release date: 2026-02-25

  • Notices and consultations: 89-26-0008
    Description: This report describes how Statistics Canada administers its responsibilities in the year of operation of the Privacy Act. It is prepared and submitted in accordance with section 72 of the Act and is tabled in Parliament.
    Release date: 2026-02-25

  • Surveys and statistical programs – Documentation: 17-20-00032026002
    Description: This report aims to describe the methods used for the calculation of projection parameters, the various projection assumptions and their rationales.
    Release date: 2026-01-27

  • Surveys and statistical programs – Documentation: 13-20-0001
    Description: The Canadian Food Environment Dataset (Can-FED) is a pan-Canadian dataset of retail food environment measures at the dissemination area (DA) level based on food outlet data from the Statistics Canada Business Register.
    Release date: 2025-12-19

  • Surveys and statistical programs – Documentation: 13-20-00012025002
    Description: This user guide contains supporting documentation for the Canadian Food Environment Dataset (Can-FED). Can-FED is a pan-Canadian dataset of retail food environment measures at the dissemination area level based on food outlet data from the 2024 Statistics Canada Business Register.
    Release date: 2025-12-19