Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,130 to 9,140 of 10,894 results)

  • 9,131. The Labour Cost Index Archived
    Journals and periodicals: 71-586-X
    Description:

    This paper is a response to the requests of Canadian policy makers and researchers to develop a comprehensive index of total labour costs for the Canadian economy. This Labour Cost Index (LCI), which measures both wage and non-wage costs, would be free from the influence of employment shifts in industries and occupations.

    This paper provides a review of the U.S. Employment Cost Index (ECI). The paper describes the LCI in general terms and compares this measure of labour cost with some other Canadian labour market indicators. The paper lists some of the uses and limitations of labour cost index based on the experiences of some other countries with such an index. The paper outlines the proposed plans and micro data model to be tested to develop a Canadian LCI. The major milestones and development issues are summarized in the paper.

    Release date: 2001-08-24

  • Articles and reports: 56F0004M2001004
    Geography: Canada
    Description:

    This paper looks at the Internet use of older Canadians and compares them with older non-Internet users with respect to income, education and gender.

    Release date: 2001-08-24

  • Articles and reports: 21-601-M2001051
    Description:

    This paper looks at the changing trends in paid and unpaid farm work as well as farmers reporting another professional activity.

    Release date: 2001-08-23

  • Articles and reports: 12-001-X20010015851
    Description:

    We consider 'telesurveys' as surveys in which the predominant or unique mode of collection is based on some means of electronic telecommunications - including both the telephone and other more advanced technological devices such as e-mail, Internet, videophone or fax. We review, briefly, the early history of telephone surveys, and, in more detail, recent developments in the areas of sample design and estimation, coverage and nonresponse and evaluation of data quality. All these methodological developments have led the telephone survey to become the major mode of collection in the sample survey field in the past quarter of a century. Other modes of advanced telecommunication are fast becoming important supplements and even competitors to the fixed line telephone and are already being used in various ways for sample surveys. We examine their potential for survey work and the possible impact of current and future technological developments of the communications industry on survey practice and their methodological implications.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015852
    Description:

    We consider the regression composite estimation introduced by Singh (1994, 1996; termed earlier as "modified regression composite" estimation), a version of which (suggested by Fuller 1999) has been implemented for the Canadian Labour Force Survey (CLFS) beginning in January 2000. The regression composite (rc) estimator enhances the generalized regression (gr) estimator used earlier for the CLFS and the well known Gurney-Daly ak-composite estimator in several ways.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015853
    Description:

    The Canadian Labour Force Survey is a monthly survey of households selected according to a stratified multistage design. The sample of households is divided into six panels (rotation groups). A panel remains in the sample for six consecutive months and is then dropped from the sample. In the past, a generalized regression estimator, based only on the current month's data, has been implemented with a regression weights program. In this paper, we study regression composite estimation procedures that make use of sample information from previous periods and that can be implemented with a regression weights program.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015854
    Description:

    This paper looks at a range of estimators applicable to a regularly repeated household survey with controlled overlap between successive surveys. The paper shows how the Best Linear Unbiased Estimator (BLUE) based on a fixed window of time points can be improved by applying the technique of generalised regression. This improved estimator is compared to the AK estimator of Gurney and Daly (1965) and the modified regression estimator of Singh, Kennedy, Wu and Brisebois (1997), using data from the Australian Labour Force Survey.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015855
    Description:

    The Canadian Labour Force Survey (LFS) is a monthly survey with a complex rotating panel design. After extensive studies, including the investigation of a number of alternative methods for exploiting the sample overlap to improve the quality of estimates, the LFS has chosen a composite estimation method which achieves this goal while satisfying practical constraints. In addition, for variables where there is a substantial gain in efficiency, the new time series tend to make more sense from a subject-matter perspective. This makes it easier to explain LFS estimates to users and the media. Because of the reduced variance under composite estimation, for some variables it is now possible to publish monthly estimates where only three-month moving averages were published in the past. In addition, a greater number of series can be successfully seasonally adjusted.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015856
    Description:

    Imputation is commonly used to compensate for item nonresponse. Variance estimation after imputation has generated considerable discussion and several variance estimators have been proposed. We propose a variance estimator based on a pseudo data set used only for variance estimation. Standard complete data variance estimators applied to the pseudo data set lead to consistent estimators for linear estimators under various imputation methods, including without-replacement hot deck imputation and with-replacement hot deck imputation. The asymptotic equivalence of the proposed method and the adjusted jackknife method of Rao and Sitter (1995) is illustrated. The proposed method is directly applicable to variance estimation for two-phase sampling.

    Release date: 2001-08-22

  • Articles and reports: 12-001-X20010015857
    Description:

    This article describes and evaluates a procedure for imputing missing values for a relatively complex data structure when the data are missing at random. The imputations are obtained by fitting a sequence of regression models and drawing values from the corresponding predictive distributions. The types of regression models used are linear, logistic, Poisson, generalized logit or a mixture of these depending on the type of variable being imputed. Two additional common features in the imputation process are incorporated: restriction to a relevant subpopulation for some variables and logical bounds or constraints for the imputed values. The restrictions involve subsetting the sample individuals that satisfy certain criteria while fitting the regression models. The bounds involve drawing values from a truncated predictive distribution. The development of this method was partly motivated by the analysis of two data sets which are used as illustrations. The sequential regression procedure is applied to perform multiple imputation analysis for the two applied problems. The sampling properties of inferences from multiply imputed data sets created using the sequential regression method are evaluated through simulated data sets.

    Release date: 2001-08-22
Reference (2,038)

Reference (2,038) (290 to 300 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-26-0003
    Description:

    Statistics Canada Data Strategy (SCDS) provides a course of action for managing and leveraging the agency’s data assets to ensure their optimal use and value while maintaining public trust. As Statistics Canada is the nation’s trusted provider of high-quality data and information to support evidence-based policy and decision making, the SCDS also naturally includes the agency’s plan for providing support and data expertise to other government organizations (federal, provincial and territorial), non-governmental organizations, the private sector, academia, and other national and international communities).

    The SCDS provides a roadmap for how Statistics Canada will continue to govern and manage its valuable data assets as part of its modernization agenda and in alignment with and response to other federal government strategies and initiatives. These federal strategies include the Data Strategy for the Federal Public Service, Canada’s 2018-2020 National Action Plan on Open Government, and the Treasury Board Secretariat Digital Operations Strategic Plan: 2018-2022.

    Release date: 2020-04-30

  • Surveys and statistical programs – Documentation: 34-26-0002
    Description:

    As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

    This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

    Release date: 2020-04-01

  • Surveys and statistical programs – Documentation: 37-20-00012020001
    Description:

    This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 37-20-00012020002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 89-20-00052020009
    Description: In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.
    Release date: 2020-03-03

  • Surveys and statistical programs – Documentation: 89-20-00052020008
    Description: This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.
    Release date: 2020-02-19

  • 297. Creating Vector Data Archived
    Surveys and statistical programs – Documentation: 89-20-00052020006
    Description: In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

    We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

    In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052020007
    Description: This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.
    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052019001
    Description: In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020001
    Description: This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.
    Release date: 2020-02-17