Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,450 to 12,460 of 13,366 results)

  • Public use microdata: 11M0001X
    Description:

    The major objective of this survey is to collect information on nature-related activities (such as viewing, studying, and photographing nature, camping, hiking, skiing, boating, hunting and fishing), and what these activities contributed to the Canadian economy. The survey was run previously in 1982, 1988 and 1992, and covered fish and wildlife-related activities in the preceding calendar year. This year's survey, covering the 1996 calendar year, is designed to update information from the previous surveys on fish and wildlife-related activities and to provide new information on other nature-related activities.

    Release date: 1999-06-29

  • Public use microdata: 75M0007X
    Description:

    The Absence from Work Survey was designed primarily to fulfill the objectives of Human Resources Development Canada. They sponsor the qualified wage loss replacement plan which applies to employers who have their own private plans to cover employee wages lost due to sickness, accident, etc. Employers who fall under the plan are granted a reduction in their quotas payable to the Unemployment Insurance Commission. The data generated from the responses to the supplement will provide input to determine the rates for quota reductions for qualified employers.

    Although the Absence from Work Survey collects information on absences from work due to illness, accident or pregnancy, it does not provide a complete picture of people who have been absent from work for these reasons because the concepts and definitions have been developed specifically for the needs of the client. Absences in this survey are defined as being at least two weeks in length, and respondents are only asked the three reasons for their most recent absence and the one preceding it.

    Release date: 1999-06-29

  • Table: 13-208-X
    Description:

    This publication shows the distribution of census families and persons not in families by size of income, major source of income, region/province, age, sex and other characteristics. The census family concept used is identical to that of the Canadian census. Statistics are derived from the Survey of Consumer Finances, conducted annually since 1972. Definitions and a bibliography are included.

    Release date: 1999-06-28

  • Table: 50-002-X19990039057
    Description:

    To provide users with a complete picture of the financial and operational activities associated with Small For-hire Motor Carriers of Freight and Owner Operators in Canada.

    Release date: 1999-06-08

  • 12,455. Earnings of Men and Women Archived
    Table: 13-217-X
    Description:

    This publication presents detailed tabulations on annual employment earnings of men and women from data collected by the Survey of Consumer Finances (SCF), an annual supplement to the monthly Labour Force Survey (LFS). The report, one in a series of annual reports from the SCF, enables users to contrast and compare the earnings status of men and women, with tables presenting statistics by sex for two major subgroups of earners: those that worked at a full-time job year-round (where "year-round" is defined as forty-nine or more weeks of the year), and all other workers (ie., those that worked at a part-time job from one to fifty-two weeks, combined with those that worked full-time for less than forty-nine weeks).

    Release date: 1999-05-28

  • Table: 62F0040X1997001
    Description:

    The first in this series is the Consulting Engineering Services Price Index (CEPI) which is an annual index that measures changes in the prices for services provided by consulting engineers. These services encompass advisory and design work as well as construction or project management. They are provided for many types of projects (fields of specialization), and to both Canadian and foreign clients. Price indexes are published for 10 fields of specialization as well as for national, regional, and foreign markets.

    Release date: 1999-05-04

  • Table: 53-215-X19970004547
    Description:

    Over the past few decades, the fight against pollution of the environment has gone from the fringe to being fashionable to being controversial and, perhaps, even considered to be life threatening. A great debate now rages worldwide with regards to human-generated greenhouse gas emissions (GHG) and their impact on the environment.

    Release date: 1999-05-03

  • Table: 54-205-X19970004527
    Description:

    This report uses container data from two sources, Statistics Canada's marine international Origin/Destination (O/D) database and Journal of Commerce P.I.E.R.S. data (provided by the Maritime Administration of the US Department of Transport).

    Release date: 1999-04-30

  • Table: 93F0038X
    Description:

    The three tables for Canada and each province present key variables from the 1996 Census of Agriculture-Population Linkage Base and where possible, comparisons to 1991 data. The key variables include summary data on age, marital status, mother tongue, highest level of schooling, income profiles for Census farm families and farm population counts.

    Release date: 1999-04-26

  • Public use microdata: 95M0013X
    Description:

    This file provides data on the characteristics of the population such as ethnic origin, labour force activity and income levels. It contains 122 variables.

    The Microdata Files contain samples of anonymous responses to the 1996 Census questionnaire. The files have been carefully scrutinized to ensure the complete confidentiality of the individual responses. PUMFs enable the development of statistical information about Canadians, the families and households to which they belong, and the dwellings in which they live.

    Microdata files are unique among census products in that they give users access to non-aggregated data. This makes PUMFs a powerful research tools. The user can group and manipulate these variables to suit his/her own data and research requirements. These provide quick access to a comprehensive social and economic database about Canada and its people.

    All subject matter covered by the census is included in these files.

    The 1996 PUMFs will only be released on CD-ROM using microcomputer applications.

    Release date: 1999-04-15
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (90 to 100 of 2,038 results)

  • Surveys and statistical programs – Documentation: 25-26-0002
    Description: The Consolidated Energy Statistics table (CEST) provides national level monthly estimates of supply and demand characteristics, for both primary and secondary energy sources by fuel type. The data is presented in terajoules; a common unit of measure, allowing easy comparisons between different fuel and energy types. The table is updated with new data on a monthly basis.
    Release date: 2025-04-29

  • Surveys and statistical programs – Documentation: 71-543-G
    Description: The Guide to the Labour Force Survey contains a dictionary of concepts and definitions and covers topics such as survey methodology, data collection, data processing and data quality. It also contains information on products and services, sub-provincial geography descriptions as well as the survey questionnaire.
    Release date: 2025-04-04

  • Surveys and statistical programs – Documentation: 11-26-0001
    Description: The data for the products associated with this technical reference guide are derived from an early version of the T1 file that Statistics Canada receives from Canada Revenue Agency (CRA). Data on special topics linked to income and income tax deductions can be derived from the T1 income tax returns. Topics of interest for this preliminary release of the T1 data can vary from year to year.
    Release date: 2025-04-01

  • Surveys and statistical programs – Documentation: 72-203-G
    Description: The Guide to the Survey of Employment, Payrolls and Hours contains a dictionary of concepts and definitions and covers topics such as survey methodology, data collection and processing, and data quality. It also provides information on products and services, as well as the survey questionnaire.
    Release date: 2025-03-27

  • Geographic files and documentation: 16-510-X2025001
    Description: This document describes the methodology used to develop the land cover register, a raster dataset that maps Canada’s terrestrial and freshwater land cover using an 11-class classification system. The data product, with a spatial resolution of 30 metres, represents circa 2020 and was created through the integration of multiple land cover and land use datasets. The dataset and documentation were created by the Census of Environment program and will support Statistics Canada's ecosystem accounting efforts.
    Release date: 2025-03-27

  • Surveys and statistical programs – Documentation: 98-20-00032021038
    Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain where to find and how to extract a profile of selected socio-demographic characteristics related to the Indigenous peoples in the standard data products of the Census of Population website.
    Release date: 2025-02-19

  • Surveys and statistical programs – Documentation: 98-20-00032021039
    Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain where to find and how to extract the data related to the Special Interest Profile, a data product of the 2021 Census of Population.
    Release date: 2025-02-19

  • Surveys and statistical programs – Documentation: 71F0031X
    Description: This paper introduces and explains modifications made to the Labour Force Survey estimates.
    Release date: 2025-01-24

  • Surveys and statistical programs – Documentation: 71F0031X2025001
    Description: This paper introduces and explains modifications made to the Labour Force Survey estimates in January 2025. Some of these modifications include the adjustment of all LFS estimates to reflect population counts based on the 2021 Census and updates to the 2021 Standard Geographical Classification (SGC).
    Release date: 2025-01-24

  • Surveys and statistical programs – Documentation: 91-620-X
    Description: This report aims to describe the methods used for the calculation of projection parameters, the various projection assumptions and their rationales.
    Release date: 2025-01-21