Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,870 to 10,880 of 10,894 results)

  • Articles and reports: 12-001-X197600100002
    Description: A special class of missing data problems is discussed, namely that of typical survey data whereby zeros dominate the multivariate response space. Here, techniques which impute means (whether conditional or unconditional) distort rather than improve the quality of the data. A probabilistic model is described which provides reasonable estimates, but also upholds the integrity of the data base. Results are given from a comparative study of the proposed methodology with other estimation/imputation models.
    Release date: 1976-06-14

  • 10,872. Raking ratio estimators Archived
    Articles and reports: 12-001-X197600100003
    Description: This paper presents large sample results for the bias and variance of raking-ratio estimators for up to four iterations. Estimators of the bias and variance are also presented. An expression for the asymptotic covariance matrix of the maximum likelihood estimators of the cell proportions in a two-way table with known marginals is also given.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197600100004
    Description: With the recent review of the Labour Force Survey, several periphexal projects have been redesigned. This is the case with the LFS re-interview program which will for the coming years be oriented toward the measurement of response errors. This paper describes the new design of the program and discusses how data will be analysed to achieve the objectives.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197600100005
    Description: This paper presents the Behrens-Fisher problem and gives an overview of the major solutions brought forward to this date. The aim of the paper is to use the most appropriate approach to the problem for testing sets of six month Labour Force Survey data against those of a pilot study. This is done since in many cases (such as Methods Test Panel studies) studies are conducted for six consecutive months and comparisons are required on the basis of those sets of six month data. Empirical results are also given by testing Methods Test Panel Phase III data against corresponding Labour Force Survey data.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197600100006
    Description: Multi-stage statistical surveys as a means of obtaining socioeconomic characteristics for the population have been in use for many years. Each survey requires an extensive and precise sample design which is governed by the cost structure for obtaining the data and the variance of the characteristic data between units at various stages of sampling. The authors analyzed variance components derived from one month's data of the Canadian Labour Force Survey and examined the variance that would have resulted under different allocation strategies in Table 6 and for different average sizes of units in Table 7. The percentage components of variance, the design effects by stage of sampling and population variances between units of the various stages, as well as measures of homogeneity for households within stages, are derived and shown in Tables 2 to 5.

    The analysis was carried out for the Canadian Labour Force Survey, but the methodology of component of variance estimation (Gray [4]) and the methods used to analyze the results of a particular survey are readily applied to any multi-stage statistical sample survey, where Horvitz-Thompsen estimators and ratio estimation are applied.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197500254826
    Description: Exact formulae for bias and mean square error of an estimator of process average in single sampling with rectification for finite lots are obtained. Efficiency of the estimator as compared to an unbiased estimator based on the first sample is obtained for a number of values of lot size, sample size, acceptance number and process average used in sampling plans in quality control of data processing.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254827
    Description: In the Methods Test Panel Phase II it was required to do analysis of variance on proportions. Since such analysis gives only approximate results, two models were used in order to be able to draw safe conclusions. Analysis of variance was performed with the proportions as variable and also with the arc sine of the square root of the proportions. The two models are outlined in the present paper and empirical comparisons are made using the MTP Phase II data.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254828
    Description: The Canadian Travel Survey, 1971 was the largest survey on travel of Canadian residents. This paper describes some important aspects of the methodology. Particular emphasis is given to the development of definitions in relation to the methodology, the sampling technique and interview strategy.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254829
    Description: J.N.K. Rao (1975) derived a general formula for estimating the variance in multistage sample designs. This general formula extends the previous results by Des Raj (1966) to the case where the conditional variance from a given primary sampling unit is a random variable. The authors reviewed Rao's paper for its application to Horvitz-Thompson and Yates-Grundy variance estimators as well as the variance estimator for the random group method by Rao, Hartley and Cochran (1962). The authors present an altered version of the Yates-Grundy variance estimators as a result of Rao's paper.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254830
    Description: This paper focuses on the improvement of sample survey estimates in the particular situation where the survey sample, or part of it, is included in a larger sample from which auxiliary information is available. The properties of a method of estimation - sometimes applied in specific circumstances - are investigated and the limitations of its application are found. The application of the method to rotation designs in continuing surveys is more closely studied in the context of composite estimation.
    Release date: 1975-12-15
Reference (2,038)

Reference (2,038) (890 to 900 of 2,038 results)

  • Geographic files and documentation: 92F0147X
    Description:

    The set of Dissemination Area Reference Maps by Non-tracted Census Agglomeration covers the smaller census agglomerations that are not part of the census tract program. Each map in the set covers one census agglomeration (CA) and shows the boundaries and codes of dissemination areas within that CA. The maps also show the boundaries of census subdivisions (municipalities), as well as urban areas, and representative points for designated places. The maps include background information such as rivers, lakes, railroad tracks and provincial boundaries, and other significant features.There are 173 maps in this set - between one and four maps per census agglomeration.. Some maps include insets to show detail for the congested areas. These insets appear on the main map where possible, but in some cases it appears on a second map sheet. The maps vary in scale and size, the maximum dimensions being approximately 91 cm by 101 cm (36 inches by 40 inches). A reference guide is available (Catalogue No. 92F0146GIE).Dissemination area reference maps are also available for census tract for large urban centres, that is, census metropolitan areas and census agglomerations (92F0146XCB, 92F0146XIB, 92F0146XPB), and by census division for areas outside census metropolitan areas and census agglomerations (92F0148XCB, 92F0148XIB, 92F0148XPB). Together, the three sets of dissemination area maps cover all of Canada.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0148X
    Description:

    The set of Dissemination Area Reference Maps covers areas outside census metropolitan areas (CMAs) and census agglomerations (CAs). Each map in the set covers one census division (CD) and shows the boundaries and codes of dissemination areas within that CD. The maps also show the boundaries of census subdivisions, census metropolitan areas and census agglomerations, as well as urban areas and representative points for designated places. The maps include background information such as rivers, lakes, railroad tracks and provincial boundaries, and other significant features.There are approximately 600 maps in this set - generally two maps per census division. Some maps include insets to show detail for the congested areas. These insets appear on the main map where possible, but in some cases they appear on a second map sheet. The maps vary in scale and size; the maximum dimensions are approximately 91 cm by 101 cm (36 inches by 40 inches). A reference guide is available (Catalogue No. 92F0146GIE).Dissemination area reference maps are also available by census tract for larger urban centres, that is, census metropolitaan areas and census agglomerations (92F0146XCB, 92F0146XIB, 92F0146XPB), and by small urban centres, that is, non-tracted census agglomarations (92F0147XCB, 92F0147XIB, 92F0147XPB). Together, the three sets of dissemination area maps cover all of Canada.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0149G
    Description:

    The Census Division and Census Subdivision Reference Maps Reference Guide is available for the following products: Census Division and Census Subdivision Reference Maps, by Province or Territory, 2001 Census (Catalogue Nos. 92F0149XIB, 92F0149XCB and 92F0149XPB). The Reference Guide describes the content and applications of these products, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0149X
    Geography: Province or territory
    Description:

    The set of Census Division and Census Subdivision Reference Maps covers all of Canada, by province and territory. The maps show the boundaries, names and codes of census divisions (such as counties and regional districts) and census subdivisions (such as cities, towns, villages, other local municipal entities, townships and Indian reserves). The maps also show the boundaries of census metropolitan areas and census agglomerations. There are 22 maps in the set: one map covers each province or territory, except for Ontario, Manitoba, Saskatchewan and Alberta where two maps cover each province, British Columbia where three maps cover the province, and Quebec where four maps cover the province. The maps vary in scale (ranging from 1:310,000 to 1:3,500,000) and size, the maximum dimensions being approximately 145 cm by 99 cm (57 inches by 39 inches). The maps have the same general look as in 1996. A reference guide is available (Catalogue No. 92F0149GIE). The complete set of CD/CSD maps is available in the Standard Geographical Classification Manual, Volume II (Catalogue No. 12-572-XPB). This publication also includes three maps of Canada at the 1:10,000,000 scale, one showing census divisions, one showing economic regions and census divisions, and one showing point locations of census metropolitan areas and census agglomerations.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0150G
    Description:

    GeoSuite is a tool for data retrieval, query, and tabular output, with software. GeoSuite allows users to explore the links between all standard levels of geography and to determine geographic codes, names, and population and dwelling counts. GeoSuite includes a dissemination area (DA) reference map listing that facilitates the identification of appropriate DA reference maps.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0152X
    Description:

    This national map shows the boundaries, names and codes of federal electoral districts (FEDs) according to the 1996 Representation Order, on a background of major lakes and rivers. Insets show more detail for the congested areas on the map. The FED map was produced by Natural Resources Canada for Elections Canada. The dimensions of this map are approximately 28 cm by 79 cm (11 inches by 31 inches).

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0157G
    Description:

    The Road Network Files Reference Guide is available for the following product: Road Network Files (RNFs) (Catalogue No. 92F0157XCE). The Reference Guide describes the content and applications of the product, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0158G
    Description:

    The Skeletal Road Network File Reference Guide is available for the following product: Skeletal Road Network File (SRNF) (Catalogue No. 92F0158XCE). The Reference Guide describes the content and applications of the product, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0171G
    Description:

    The Cartographic Boundary Files Reference Guide is available for the following products:

    - Provinces and Territories Cartographic Boundary File (Catalogue No. 92F0160XCE).- Census Divisions and Economic Regions Cartographic Boundary Files (Catalogue No. 92F0161XCE)- Census Subdivisions Cartographic Boundary Files (Catalogue No. 92F0162XCE)- Federal Electoral Districts (1996 Representation Order) Cartographic Boundary File (Catalogue No. 92F0163XCE)- Urban Areas Cartographic Boundary File (Catalogue No. 92F0164XCE)- Designated Places Cartographic Boundary File (Catalogue No. 92F0165XCE)- Census Metropolitan Areas and Census Agglomerations Cartographic Boundary File (Catalogue No. 92F0166XCE)- Census Consolidated Subdivisions Cartographic Boundary File (Catalogue No. 92F0167XCE)- Census Tracts Cartographic Boundary Files (Catalogue No. 92F0168XCE)- Dissemination Areas Cartographic Boundary Files (Catalogue No. 92F0169XCE)

    The Reference Guide describes the content and applications of these products, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0138M2002001
    Description: The 2001 Census defines 27 census metropolitan area (CMAs) and 19 census agglomerations (CAs) with census tracts. This working paper includes three maps for each of these CMAs and CAs. The first map shows the boundary of the CMA/CA and the boundaries of the census subdivision (CSD) components of the CMA/CA for the 1996 Census. The second map shows the transition from 1996 to 2001 (with boundary changes highlighted), and the third map shows the CMA/CA (and component CSDs) as it is defined for the 2001 Census. Accompanying tables list the component census subdivisions and the criteria which they meet to be included in the CMA or CA. The paper describes various factors that can result in changes to the boundaries of CMAs and CAs. For the 2001 Census, municipal restructuring is the factor that has had the greatest impact on the boundaries of some CMAs and CAs. The paper also briefly describes and compares the delineation criteria for metropolitan areas in the United States with those for census metropolitan areas in Canada. An indication is given of the impact on the Canadian CMA program if the American metropolitan area criteria were used.
    Release date: 2002-03-08