Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,840 to 8,850 of 10,894 results)

  • Articles and reports: 11-522-X20010016289
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Increasing demand for electronic reporting in establishment surveys has placed additional emphasis on incorporating usability into electronic forms. We are just beginning to understand the implications surrounding electronic forms design. Cognitive interviewing and usability testing are analogous in that both types of testing have similar goals: to build an end instrument (paper or electronic) that reduces both respondent burden and measurement error. Cognitive testing has greatly influenced paper forms design and can also be applied towards the development of electronic forms. Usability testing expands on existing cognitive testing methodology to include examination of the interaction between the respondent and the electronic form.

    The upcoming U.S. 2002 Economic Census will offer businesses the ability to report information using electronic forms. The U.S. Census Bureau is creating an electronic forms style guide outlining the design standards to be used in electronic form creation. The style guide's design standards are based on usability principles, usability and cognitive test results, and Graphical User Interface standards. This paper highlights the major electronic forms design issues raised during the preparation of the style guide and describes how usability testing and cognitive interviewing resolved these issues.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016290
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Over the last five years, the United Kingdom Office for National Statistics has been implementing a series of initiatives to improve the process of collecting business statistics data in the UK. These initiatives include the application of a range of new technology solutions data collection; document imaging and scanned forms have replaced paper forms for all processes. For some inquiries, the paper form has been eliminated altogether by the adoption of Telephone Data Entry (TDE). Reporting all incoming data in electronic format has allowed workflow systems to be introduced across a wide range of data collection activities.

    This paper describes the recent history of these initiatives and covers proposals that are presently at a pilot stage or being projected for the next four years. It also examines the future strategy of TDE data collection via the Internet, and the current pilots and security issues under consideration.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016291
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Many types of Web surveys are not based on scientific sampling and do not represent any well-defined population. Even when Web surveys are based on a general sample, it is not known whether they yield reliable or valid results. One way to test the adequacy of Web surveys is to conduct experiments comparing Web surveys with well-established, traditional survey methods. One such test was performed by comparing the 2000 General Social Survey of the National Opinion Research Center with a Knowledge Networks Web survey.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016292
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Statistics can serve to benefit society, but, if manipulated politically or otherwise, statistics may also be used by the powerful as instruments to maintain the status quo or even to oppress. Statisticians working internationally, usually employed by international, supra-national or bilateral agencies, face a range of problems as they try to 'make a difference' in the lives of the poorest people in the world. One of the most difficult challenges statisticians face is the dilemma between open accountability and national sovereignty (in relation to what data are collected, the methods used and who is to have access to the results). Because of increasing globalization and new modalities of development co-operation and partnership, statisticians work in a constantly changing environment.

    This paper addresses the problems of improving the quality of cross-national data. This paper aims to raise consciousness of the role of statisticians at the international level; describe some of the constraints under which statisticians work; address principles which ought to govern the general activities of statisticians; and evaluate, in particular, the relevance of such principles to international statisticians. This paper also draws upon the recent Presidential Address to the Royal Statistical Society (Presented June 2001, JRSS Series D forthcoming).

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016294
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists. Outcome rates in telephone surveys are usually based on an entire sample. However, telephone samples from commercial sample vendors contain identifiable subsets of records with very different probabilities of obtaining particular dispositions. In such a case, component outcome rates could vary in ways unrelated to rates based on the entire sample. The 2000 Behavioral Risk Factor Surveillance System (BRFSS) survey examines the degree to which selected outcome rates (by state, for different subsets of records) correlate with corresponding global rates. Although correlations tend to be large, not all cases are, making it worthwhile to examine component outcome rates.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016295
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    In order to compensate for unreported, missing, unreasonable, or unusable data, the Uniform Crime Reporting (UCR) Program conducts data estimations and imputations using a variety of statistical methods. This paper illustrates how offence and arrest data are estimated using a variety of different approaches. The paper also points out the strengths and the shortcomings of each approach.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016296
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    The Canadian Labour Force Survey (LFS) is one of Statistics Canada's most important surveys. It is a monthly survey that collects data concerning the person's labour force status, the nature of the person's work or reason for not working, and the person's demographics. The survey sample consists of approximately 52,000 households. Coverage error is a measure of data quality that is important to any survey. One of the key measures of coverage error in the LFS is the percentage difference between the Census of Population estimates and the LFS population counts; this error is called slippage. A negative value indicates that the LFS has a problem of overcoverage, while a positive value indicates the LFS has an undercoverage problem. In general, slippage is positive, thus meaning that the LFS consistently misses people who should be enumerated.

    The purpose of this study was to determine why slippage is increasing and what can be done to remedy it. The study was conducted in two stages. The first stage was a historical review of the projects that have studied and tried to control slippage in the LFS, as well as the operational changes that have been implemented over time. The second stage was an analysis of factors such as vacancy rates, non-response, demographics, urban and rural status and the impact of these factors on the slippage rate.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016297
    Description:

    This paper discusses in detail issues dealing with the technical aspects in designing and conducting surveys. It is intended for an audience of survey methodologists. The Danish National Institute of Social Research is an independent institution under the Ministry of Social Affairs. The Institute carries out surveys on social issues on encompassing a broad range of subjects. The Sustainable Financing Initiative Survey (SFI-SURVEY) is an economically independent section within the institute. SFI-SURVEY carries out scientific surveys both for the Institute, for other public organizations, and for the private sector as well. The SFI-SURVEY interviewer body has 450 interviewers spread throughout Denmark. There are five supervisors, each with a regional office, who are in contact with the interviewer body. On a yearly basis, SFI-SURVEY conducts 40 surveys. The average sample size (gross) is 1,000 persons. The average response rate is 75%. Since January 1999, the following information about the surveys have been recorded: · Type of method used (face-to-face or telephone) · Length of questionnaire (interviewing time in minutes) · Whether or not a folder was sent to the respondents in advance · Whether or not an interviewer instruction meeting was given · Number of interviews per interviewer per week · Whether or not the subject of the survey was of interest to the respondents · Interviewing month · Target group (random selection of the total population or special groups)

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016298
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    This paper discusses the Office for National Statistics' (ONS) approach to developing systematic quality measurements and reporting methods. It is presented against the background of European developments and the growing demand for quality measurement. Measuring the quality of statistics presents considerable practical and methodological challenges. The paper describes the main building blocks to be used for the new quality measure program, and includes specific examples. Working with other national statistical institutions; and developing an enhanced measurement framework, output measurements, and reporting procedures, are all vital ingredients in achieving recognition of the ONS as a quality organization.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016300
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    The Australian Bureau of Statistics (ABS) produces many statistics that help the government and the wider community make more informed decisions. However, if these decisions are to be truly informed, it is essential that the users are able to understand the limitations of the statistics and how to use the data in an appropriate context. As a result, the ABS has initiated a project entitled Qualifying Quality, which focuses on two key directions: presentation and education. Presentation provides people with information about the quality of the data in order to help them answer the question "Are the data fit for the purpose?"; while education assists those people in appreciating the importance of information on quality and knowing how to use such information. In addressing these two issues, the project also aims to develop and identify processes and technical systems that will support and encourage the appropriate use of data.

    This paper provides an overview of the presentation and education initiatives which have arisen from this project. The paper then explores the different methods of presentation, the systems that support them, and how the education strategies interact with each other. In particular, the paper comments on the importance of supporting education strategies with well developed systems and appropriate presentation methods.

    Release date: 2002-09-12
Reference (2,038)

Reference (2,038) (290 to 300 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-26-0003
    Description:

    Statistics Canada Data Strategy (SCDS) provides a course of action for managing and leveraging the agency’s data assets to ensure their optimal use and value while maintaining public trust. As Statistics Canada is the nation’s trusted provider of high-quality data and information to support evidence-based policy and decision making, the SCDS also naturally includes the agency’s plan for providing support and data expertise to other government organizations (federal, provincial and territorial), non-governmental organizations, the private sector, academia, and other national and international communities).

    The SCDS provides a roadmap for how Statistics Canada will continue to govern and manage its valuable data assets as part of its modernization agenda and in alignment with and response to other federal government strategies and initiatives. These federal strategies include the Data Strategy for the Federal Public Service, Canada’s 2018-2020 National Action Plan on Open Government, and the Treasury Board Secretariat Digital Operations Strategic Plan: 2018-2022.

    Release date: 2020-04-30

  • Surveys and statistical programs – Documentation: 34-26-0002
    Description:

    As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

    This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

    Release date: 2020-04-01

  • Surveys and statistical programs – Documentation: 37-20-00012020001
    Description:

    This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 37-20-00012020002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 89-20-00052020009
    Description: In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.
    Release date: 2020-03-03

  • Surveys and statistical programs – Documentation: 89-20-00052020008
    Description: This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.
    Release date: 2020-02-19

  • 297. Creating Vector Data Archived
    Surveys and statistical programs – Documentation: 89-20-00052020006
    Description: In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

    We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

    In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052020007
    Description: This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.
    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052019001
    Description: In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020001
    Description: This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.
    Release date: 2020-02-17