Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,380 to 8,390 of 10,894 results)

  • Articles and reports: 75F0002M2004001
    Description:

    The purpose of this document is to describe the detailed methodology and assumptions behind the construction of the market basket measure (MBM) of low income. Also this document will raise some issues and highlight some data limitations related to the MBM.

    The MBM represents the cost of a basket that includes a nutritious diet, clothing and footwear, shelter, transportation, and other necessary goods and services (such as personal care items or household supplies).

    The MBM methodology was developed by the Federal/Provincial/Territorial Working Group on Social Development Research and Information for Human Resources Development Canada (HRDC).

    Release date: 2004-02-04

  • Articles and reports: 88F0006X2004002
    Description:

    This publication explains the estimation procedures used to calculate 2001/02 research and development (R&D) expenditures in the Higher Education sector. The Higher Education Research and Development (HERD) performance figures are estimated using a new technique that was developed in 2000 and first applied to the 1998/99 data. It assumes that the total expenditures on HERD are equal to the sum of

    a) sponsored research (available from Canadian Association of University Business Officers [CAUBO] sources)b) an estimate of indirect expenditures on sponsored researchc) a value for the fraction of faculty time devoted to sponsored and non-sponsored researchd) an estimate of indirect expenditures related to faculty time on researche) teaching hospitals data not included in CAUBO data.

    Release date: 2004-01-28

  • Articles and reports: 88F0006X2004003
    Description:

    This publication presents the national gross domestic expenditures on research and development (GERD) from 1992 to 2003, as well as the provincial GERD from 1992 to 2001. Up until 1985, GERD only included research and development (R&D) expenditures in the Natural Sciences and Engineering (NSE) field. Beginning in 1985, Social Sciences and Humanities (SSH) activities have also been included in GERD. An additional series of tables showing R&D expenditures at the national level in either science from 1963 to 1991, or at the provincial level from 1979 to 1991, may be obtained from the Science and Innovation Surveys Section of the Science, Innovation and Electronic Information Division.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040017871
    Description:

    The higher education sector is composed of "all universities, colleges of technology and other institutes of post-secondary education, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under the direct control of, or administered by, or associated with higher education establishments"1 The higher education sector is one of the sectors that make up the national research and development (R&D) system. For most policy analysis, the R&D system is sub-divided into five performing sectors: the federal government, provincial governments, business enterprise, higher education, and private non-profit. It is also sub-divided into six funding sectors: the five above plus all foreign sources.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040027869
    Geography: Province or territory
    Description:

    Gross domestic expenditures on research and development (GERD) represents total research and development expenditures performed in a country's national territory during a given year. GERD includes research and development performed within a country and funded from abroad but excludes payments sent abroad for research and development performed in other countries.

    Release date: 2004-01-28

  • Articles and reports: 12-001-X20030026777
    Description:

    The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026778
    Description:

    Using both purely design based and model assisted arguments, it is shown that, under conditions of high entropy, the variance of the Horvitz Thompson (HT) estimator depends almost entirely on first order inclusion probabilities. Approximate expressions and estimators are derived for this "high entropy" variance of the HT estimator. Monte Carlo simulation studies are conducted to examine the statistical properties of the proposed variance estimators.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026779
    Description:

    In link-tracing designs, social links are followed from one respondent to another to obtain the sample. For hidden and hard-to-access human populations, such sampling designs are often the only practical way to obtain a sample large enough for an effective study. In this paper, we propose a Bayesian approach for the estimation problem. For studies using link-tracing designs, prior information may be available on the characteristics that one wants to estimate. Using this information effectively via a Bayesian approach should yield better estimators. When the available information is vague, one can use noninformative priors and conduct a sensitivity analysis. In our example we found that the estimators were not sensitive to the specified priors. It is important to note that, under the Bayesian setup, obtaining interval estimates to assess the accuracy of the estimators can be done without much added difficulty. By contrast, such tasks are difficult to perform using the classical approach. In general, a Bayesian analysis yields one distribution (the posterior distribution) for the unknown parameters, and from this a vast number of questions can be answered simultaneously.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026780
    Description:

    Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.

    In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026781
    Description:

    Census counts are known to be inexact based on comparisons of Census and Post Enumeration Survey (PES) figures. In Italy, the role of municipal administrations is crucial for both Census and PES field operations. In this paper we analyze the impact of municipality on Italian Census undercount rates by modeling data from the PES as well as from other sources using Poisson regression trees and hierarchical Poisson models. The Poisson regression trees cluster municipalities into homogeneous groups. The hierarchical Poisson models can be considered as tools for Small Area estimation.

    Release date: 2004-01-27
Reference (2,038)

Reference (2,038) (990 to 1,000 of 2,038 results)

  • Geographic files and documentation: 21-601-M1995028
    Description:

    This paper outlines the process of delineating the agricultural land base (ecumene) in Canada based on data from the 1991 Census of Agriculture.

    Release date: 2000-01-27

  • Surveys and statistical programs – Documentation: 21-601-M1999042
    Description:

    This paper reconstructs the development and evolution of the Canadian agricultural statistical system. It describes the expanding and increasingly important role of administrative data, which is integrated into survey and census information in order to complement, supplement or replace survey information or to assist with frame maintenance.

    Release date: 2000-01-14

  • Surveys and statistical programs – Documentation: 21-601-M1998034
    Description:

    This paper describes the experiences, the issues and the expectations of the many different players involved in the implementation of document imaging for the Canadian Census of Agriculture.

    Release date: 2000-01-13

  • Surveys and statistical programs – Documentation: 75F0002M1999009
    Description:

    This paper describes the issues around updating the low income cut-offs as well as Statistics Canada's findings and proposes a course of action.

    Release date: 2000-01-12

  • Surveys and statistical programs – Documentation: 92-370-X
    Description:

    Series description

    This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and the Technical Reports - as well as geography reference products - GeoSuite and Reference Maps.

    Product description

    Technical Reports examine the quality of data from the 1996 Census, a large and complex undertaking. While considerable effort was taken to ensure high quality standards throughout each step, the results are subject to a certain degree of error. Each report looks at the collection and processing operations and presents results from data evaluation, as well as notes on historical comparability.

    Technical Reports are aimed at moderate and sophisticated users but are written in a manner which could make them useful to all census data users. Most of the technical reports have been cancelled, with the exception of Age, Sex, Marital Status and Common-law Status, Coverage and Sampling and Weighting. These reports will be available as bilingual publications as well as being available in both official languages on the Internet as free products.

    This report deals with coverage errors, which occured when persons, households, dwellings or families were missed by the 1996 Census or enumerated in error. Coverage errors are one of the most important types of error since they affect not only the accuracy of the counts of the various census universes but also the accuracy of all of the census data describing the characteristics of these universes. With this information, users can determine the risks involved in basing conclusions or decisions on census data.

    Release date: 1999-12-14

  • Surveys and statistical programs – Documentation: 92-371-X
    Description:

    This report deals with sampling and weighting, a process whereby certain characteristics are collected and processed for a random sample of dwellings and persons identified in the complete census enumeration. Data for the whole population are then obtained by scaling up the results for the sample to the full population level. The use of sampling may lead to substantial reductions in costs and respondent burden, or alternatively, can allow the scope of a census to be broadened at the same cost.

    Release date: 1999-12-07

  • Surveys and statistical programs – Documentation: 92-351-U
    Description:

    Series Description:

    This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and Technical Reports - as well as two geography reference products - GeoSuite and Reference Maps.

    Product Description:

    The 1996 Census Dictionary provides detailed information on all of the concepts, variables and geographic elements of the 1996 Census. Information provided for each variable includes a definition, the associated census questions, applicable response categories or classifications and special remarks, namely on historical aspects. Users should make use of this edition of the 1996 Census Dictionary for the most up-to-date information. This final edition is also available on our web site as a free downloadable product.

    Release date: 1999-10-25

  • Surveys and statistical programs – Documentation: 11-522-X19980015007
    Description:

    The National Population Health Survey (NPHS) is a family of surveys with multiple objectives, one of which is to provide information on a panel of people who will be followed over time to reflect the dynamic process of health and illness. Data for the first cycle of the NPHS - Households Survey were collected from June 1994 to June 1995, and were released in September 1995. Data for the second cycle were collected from June 1996 to August 1997. One of the primary outputs for the second cycle is a longitudinal master file. This paper will describe six major strategies that were developed to process the longitudinal master file.

    Release date: 1999-10-22

  • Notices and consultations: 11-522-X19980015010
    Description:

    In 1994, Statistics Canada introduced a new longitudinal social survey that collects information from about 23,000 children spread over 13,500 households. The objective of the National Longitudinal Survey of Children and Youth is to measure the development and well being of children until they reach adulthood. To this end, the survey gathers together information about the child, parents, neighbourhood as well as family and school environment. As a consequence, the data collected for each child, is provided by several respondents, from parents to teachers, a situation which contributes to an increased disclosure risk. In order to reach a balance between confidentiality and the analytical value of released data, the survey produces three different microdata files with more or less information. The master file that contains all the information is only available by means of remote access. Hence, researchers do not have direct access to the data, but send their request in the form of software programs that are submitted by Statistics Canada staff. The results are then vetted for confidentiality and sent back to the researchers. The presentation will be devoted to the various disclosure risks of such a survey and to the tools used to reduce those risks.

    Release date: 1999-10-22

  • Surveys and statistical programs – Documentation: 11-522-X19980015015
    Description:

    In epidemiology analysis of longitudinal data is commonly accepted as providing the most robust measures of association between putative risk and selected outcomes such as death or cancer. SMARTIE is a SAS application for efficient analysis of longitudinal data. Based on person days at risk, it can handle multiple exits from and re-entries to risk, and derives outcome measures such as survival rates. Standardised Mortality Ratios (SMRs) and Cancer Incidence Ratios (SIRs). Summary data can be produced in a format easily ported to any modelling package such as Stats 5.0. We discuss the background to its development, the overall program structure, its command language, and finally we say something about the organization of outputs. Findings from survival studies using the Longitudinal Study of the Office for National Statistics (ONS) are used to demonstrate features of SMARTIE. This study is based on one per cent of the population of England and Wales. It is continually updated with the addition of new members and with information from birth, death and cancer records, and from the census.

    Release date: 1999-10-22