Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,380 to 8,390 of 10,894 results)

  • Articles and reports: 75F0002M2004001
    Description:

    The purpose of this document is to describe the detailed methodology and assumptions behind the construction of the market basket measure (MBM) of low income. Also this document will raise some issues and highlight some data limitations related to the MBM.

    The MBM represents the cost of a basket that includes a nutritious diet, clothing and footwear, shelter, transportation, and other necessary goods and services (such as personal care items or household supplies).

    The MBM methodology was developed by the Federal/Provincial/Territorial Working Group on Social Development Research and Information for Human Resources Development Canada (HRDC).

    Release date: 2004-02-04

  • Articles and reports: 88F0006X2004002
    Description:

    This publication explains the estimation procedures used to calculate 2001/02 research and development (R&D) expenditures in the Higher Education sector. The Higher Education Research and Development (HERD) performance figures are estimated using a new technique that was developed in 2000 and first applied to the 1998/99 data. It assumes that the total expenditures on HERD are equal to the sum of

    a) sponsored research (available from Canadian Association of University Business Officers [CAUBO] sources)b) an estimate of indirect expenditures on sponsored researchc) a value for the fraction of faculty time devoted to sponsored and non-sponsored researchd) an estimate of indirect expenditures related to faculty time on researche) teaching hospitals data not included in CAUBO data.

    Release date: 2004-01-28

  • Articles and reports: 88F0006X2004003
    Description:

    This publication presents the national gross domestic expenditures on research and development (GERD) from 1992 to 2003, as well as the provincial GERD from 1992 to 2001. Up until 1985, GERD only included research and development (R&D) expenditures in the Natural Sciences and Engineering (NSE) field. Beginning in 1985, Social Sciences and Humanities (SSH) activities have also been included in GERD. An additional series of tables showing R&D expenditures at the national level in either science from 1963 to 1991, or at the provincial level from 1979 to 1991, may be obtained from the Science and Innovation Surveys Section of the Science, Innovation and Electronic Information Division.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040017871
    Description:

    The higher education sector is composed of "all universities, colleges of technology and other institutes of post-secondary education, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under the direct control of, or administered by, or associated with higher education establishments"1 The higher education sector is one of the sectors that make up the national research and development (R&D) system. For most policy analysis, the R&D system is sub-divided into five performing sectors: the federal government, provincial governments, business enterprise, higher education, and private non-profit. It is also sub-divided into six funding sectors: the five above plus all foreign sources.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040027869
    Geography: Province or territory
    Description:

    Gross domestic expenditures on research and development (GERD) represents total research and development expenditures performed in a country's national territory during a given year. GERD includes research and development performed within a country and funded from abroad but excludes payments sent abroad for research and development performed in other countries.

    Release date: 2004-01-28

  • Articles and reports: 12-001-X20030026777
    Description:

    The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026778
    Description:

    Using both purely design based and model assisted arguments, it is shown that, under conditions of high entropy, the variance of the Horvitz Thompson (HT) estimator depends almost entirely on first order inclusion probabilities. Approximate expressions and estimators are derived for this "high entropy" variance of the HT estimator. Monte Carlo simulation studies are conducted to examine the statistical properties of the proposed variance estimators.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026779
    Description:

    In link-tracing designs, social links are followed from one respondent to another to obtain the sample. For hidden and hard-to-access human populations, such sampling designs are often the only practical way to obtain a sample large enough for an effective study. In this paper, we propose a Bayesian approach for the estimation problem. For studies using link-tracing designs, prior information may be available on the characteristics that one wants to estimate. Using this information effectively via a Bayesian approach should yield better estimators. When the available information is vague, one can use noninformative priors and conduct a sensitivity analysis. In our example we found that the estimators were not sensitive to the specified priors. It is important to note that, under the Bayesian setup, obtaining interval estimates to assess the accuracy of the estimators can be done without much added difficulty. By contrast, such tasks are difficult to perform using the classical approach. In general, a Bayesian analysis yields one distribution (the posterior distribution) for the unknown parameters, and from this a vast number of questions can be answered simultaneously.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026780
    Description:

    Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.

    In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026781
    Description:

    Census counts are known to be inexact based on comparisons of Census and Post Enumeration Survey (PES) figures. In Italy, the role of municipal administrations is crucial for both Census and PES field operations. In this paper we analyze the impact of municipality on Italian Census undercount rates by modeling data from the PES as well as from other sources using Poisson regression trees and hierarchical Poisson models. The Poisson regression trees cluster municipalities into homogeneous groups. The hierarchical Poisson models can be considered as tools for Small Area estimation.

    Release date: 2004-01-27
Reference (2,038)

Reference (2,038) (890 to 900 of 2,038 results)

  • Geographic files and documentation: 92F0147X
    Description:

    The set of Dissemination Area Reference Maps by Non-tracted Census Agglomeration covers the smaller census agglomerations that are not part of the census tract program. Each map in the set covers one census agglomeration (CA) and shows the boundaries and codes of dissemination areas within that CA. The maps also show the boundaries of census subdivisions (municipalities), as well as urban areas, and representative points for designated places. The maps include background information such as rivers, lakes, railroad tracks and provincial boundaries, and other significant features.There are 173 maps in this set - between one and four maps per census agglomeration.. Some maps include insets to show detail for the congested areas. These insets appear on the main map where possible, but in some cases it appears on a second map sheet. The maps vary in scale and size, the maximum dimensions being approximately 91 cm by 101 cm (36 inches by 40 inches). A reference guide is available (Catalogue No. 92F0146GIE).Dissemination area reference maps are also available for census tract for large urban centres, that is, census metropolitan areas and census agglomerations (92F0146XCB, 92F0146XIB, 92F0146XPB), and by census division for areas outside census metropolitan areas and census agglomerations (92F0148XCB, 92F0148XIB, 92F0148XPB). Together, the three sets of dissemination area maps cover all of Canada.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0148X
    Description:

    The set of Dissemination Area Reference Maps covers areas outside census metropolitan areas (CMAs) and census agglomerations (CAs). Each map in the set covers one census division (CD) and shows the boundaries and codes of dissemination areas within that CD. The maps also show the boundaries of census subdivisions, census metropolitan areas and census agglomerations, as well as urban areas and representative points for designated places. The maps include background information such as rivers, lakes, railroad tracks and provincial boundaries, and other significant features.There are approximately 600 maps in this set - generally two maps per census division. Some maps include insets to show detail for the congested areas. These insets appear on the main map where possible, but in some cases they appear on a second map sheet. The maps vary in scale and size; the maximum dimensions are approximately 91 cm by 101 cm (36 inches by 40 inches). A reference guide is available (Catalogue No. 92F0146GIE).Dissemination area reference maps are also available by census tract for larger urban centres, that is, census metropolitaan areas and census agglomerations (92F0146XCB, 92F0146XIB, 92F0146XPB), and by small urban centres, that is, non-tracted census agglomarations (92F0147XCB, 92F0147XIB, 92F0147XPB). Together, the three sets of dissemination area maps cover all of Canada.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0149G
    Description:

    The Census Division and Census Subdivision Reference Maps Reference Guide is available for the following products: Census Division and Census Subdivision Reference Maps, by Province or Territory, 2001 Census (Catalogue Nos. 92F0149XIB, 92F0149XCB and 92F0149XPB). The Reference Guide describes the content and applications of these products, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0149X
    Geography: Province or territory
    Description:

    The set of Census Division and Census Subdivision Reference Maps covers all of Canada, by province and territory. The maps show the boundaries, names and codes of census divisions (such as counties and regional districts) and census subdivisions (such as cities, towns, villages, other local municipal entities, townships and Indian reserves). The maps also show the boundaries of census metropolitan areas and census agglomerations. There are 22 maps in the set: one map covers each province or territory, except for Ontario, Manitoba, Saskatchewan and Alberta where two maps cover each province, British Columbia where three maps cover the province, and Quebec where four maps cover the province. The maps vary in scale (ranging from 1:310,000 to 1:3,500,000) and size, the maximum dimensions being approximately 145 cm by 99 cm (57 inches by 39 inches). The maps have the same general look as in 1996. A reference guide is available (Catalogue No. 92F0149GIE). The complete set of CD/CSD maps is available in the Standard Geographical Classification Manual, Volume II (Catalogue No. 12-572-XPB). This publication also includes three maps of Canada at the 1:10,000,000 scale, one showing census divisions, one showing economic regions and census divisions, and one showing point locations of census metropolitan areas and census agglomerations.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0150G
    Description:

    GeoSuite is a tool for data retrieval, query, and tabular output, with software. GeoSuite allows users to explore the links between all standard levels of geography and to determine geographic codes, names, and population and dwelling counts. GeoSuite includes a dissemination area (DA) reference map listing that facilitates the identification of appropriate DA reference maps.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0152X
    Description:

    This national map shows the boundaries, names and codes of federal electoral districts (FEDs) according to the 1996 Representation Order, on a background of major lakes and rivers. Insets show more detail for the congested areas on the map. The FED map was produced by Natural Resources Canada for Elections Canada. The dimensions of this map are approximately 28 cm by 79 cm (11 inches by 31 inches).

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0157G
    Description:

    The Road Network Files Reference Guide is available for the following product: Road Network Files (RNFs) (Catalogue No. 92F0157XCE). The Reference Guide describes the content and applications of the product, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0158G
    Description:

    The Skeletal Road Network File Reference Guide is available for the following product: Skeletal Road Network File (SRNF) (Catalogue No. 92F0158XCE). The Reference Guide describes the content and applications of the product, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0171G
    Description:

    The Cartographic Boundary Files Reference Guide is available for the following products:

    - Provinces and Territories Cartographic Boundary File (Catalogue No. 92F0160XCE).- Census Divisions and Economic Regions Cartographic Boundary Files (Catalogue No. 92F0161XCE)- Census Subdivisions Cartographic Boundary Files (Catalogue No. 92F0162XCE)- Federal Electoral Districts (1996 Representation Order) Cartographic Boundary File (Catalogue No. 92F0163XCE)- Urban Areas Cartographic Boundary File (Catalogue No. 92F0164XCE)- Designated Places Cartographic Boundary File (Catalogue No. 92F0165XCE)- Census Metropolitan Areas and Census Agglomerations Cartographic Boundary File (Catalogue No. 92F0166XCE)- Census Consolidated Subdivisions Cartographic Boundary File (Catalogue No. 92F0167XCE)- Census Tracts Cartographic Boundary Files (Catalogue No. 92F0168XCE)- Dissemination Areas Cartographic Boundary Files (Catalogue No. 92F0169XCE)

    The Reference Guide describes the content and applications of these products, as well as data quality, record layouts, and other information.

    Release date: 2002-03-12

  • Geographic files and documentation: 92F0138M2002001
    Description: The 2001 Census defines 27 census metropolitan area (CMAs) and 19 census agglomerations (CAs) with census tracts. This working paper includes three maps for each of these CMAs and CAs. The first map shows the boundary of the CMA/CA and the boundaries of the census subdivision (CSD) components of the CMA/CA for the 1996 Census. The second map shows the transition from 1996 to 2001 (with boundary changes highlighted), and the third map shows the CMA/CA (and component CSDs) as it is defined for the 2001 Census. Accompanying tables list the component census subdivisions and the criteria which they meet to be included in the CMA or CA. The paper describes various factors that can result in changes to the boundaries of CMAs and CAs. For the 2001 Census, municipal restructuring is the factor that has had the greatest impact on the boundaries of some CMAs and CAs. The paper also briefly describes and compares the delineation criteria for metropolitan areas in the United States with those for census metropolitan areas in Canada. An indication is given of the impact on the Canadian CMA program if the American metropolitan area criteria were used.
    Release date: 2002-03-08