Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,380 to 8,390 of 10,894 results)

  • Articles and reports: 75F0002M2004001
    Description:

    The purpose of this document is to describe the detailed methodology and assumptions behind the construction of the market basket measure (MBM) of low income. Also this document will raise some issues and highlight some data limitations related to the MBM.

    The MBM represents the cost of a basket that includes a nutritious diet, clothing and footwear, shelter, transportation, and other necessary goods and services (such as personal care items or household supplies).

    The MBM methodology was developed by the Federal/Provincial/Territorial Working Group on Social Development Research and Information for Human Resources Development Canada (HRDC).

    Release date: 2004-02-04

  • Articles and reports: 88F0006X2004002
    Description:

    This publication explains the estimation procedures used to calculate 2001/02 research and development (R&D) expenditures in the Higher Education sector. The Higher Education Research and Development (HERD) performance figures are estimated using a new technique that was developed in 2000 and first applied to the 1998/99 data. It assumes that the total expenditures on HERD are equal to the sum of

    a) sponsored research (available from Canadian Association of University Business Officers [CAUBO] sources)b) an estimate of indirect expenditures on sponsored researchc) a value for the fraction of faculty time devoted to sponsored and non-sponsored researchd) an estimate of indirect expenditures related to faculty time on researche) teaching hospitals data not included in CAUBO data.

    Release date: 2004-01-28

  • Articles and reports: 88F0006X2004003
    Description:

    This publication presents the national gross domestic expenditures on research and development (GERD) from 1992 to 2003, as well as the provincial GERD from 1992 to 2001. Up until 1985, GERD only included research and development (R&D) expenditures in the Natural Sciences and Engineering (NSE) field. Beginning in 1985, Social Sciences and Humanities (SSH) activities have also been included in GERD. An additional series of tables showing R&D expenditures at the national level in either science from 1963 to 1991, or at the provincial level from 1979 to 1991, may be obtained from the Science and Innovation Surveys Section of the Science, Innovation and Electronic Information Division.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040017871
    Description:

    The higher education sector is composed of "all universities, colleges of technology and other institutes of post-secondary education, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under the direct control of, or administered by, or associated with higher education establishments"1 The higher education sector is one of the sectors that make up the national research and development (R&D) system. For most policy analysis, the R&D system is sub-divided into five performing sectors: the federal government, provincial governments, business enterprise, higher education, and private non-profit. It is also sub-divided into six funding sectors: the five above plus all foreign sources.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040027869
    Geography: Province or territory
    Description:

    Gross domestic expenditures on research and development (GERD) represents total research and development expenditures performed in a country's national territory during a given year. GERD includes research and development performed within a country and funded from abroad but excludes payments sent abroad for research and development performed in other countries.

    Release date: 2004-01-28

  • Articles and reports: 12-001-X20030026777
    Description:

    The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026778
    Description:

    Using both purely design based and model assisted arguments, it is shown that, under conditions of high entropy, the variance of the Horvitz Thompson (HT) estimator depends almost entirely on first order inclusion probabilities. Approximate expressions and estimators are derived for this "high entropy" variance of the HT estimator. Monte Carlo simulation studies are conducted to examine the statistical properties of the proposed variance estimators.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026779
    Description:

    In link-tracing designs, social links are followed from one respondent to another to obtain the sample. For hidden and hard-to-access human populations, such sampling designs are often the only practical way to obtain a sample large enough for an effective study. In this paper, we propose a Bayesian approach for the estimation problem. For studies using link-tracing designs, prior information may be available on the characteristics that one wants to estimate. Using this information effectively via a Bayesian approach should yield better estimators. When the available information is vague, one can use noninformative priors and conduct a sensitivity analysis. In our example we found that the estimators were not sensitive to the specified priors. It is important to note that, under the Bayesian setup, obtaining interval estimates to assess the accuracy of the estimators can be done without much added difficulty. By contrast, such tasks are difficult to perform using the classical approach. In general, a Bayesian analysis yields one distribution (the posterior distribution) for the unknown parameters, and from this a vast number of questions can be answered simultaneously.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026780
    Description:

    Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.

    In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026781
    Description:

    Census counts are known to be inexact based on comparisons of Census and Post Enumeration Survey (PES) figures. In Italy, the role of municipal administrations is crucial for both Census and PES field operations. In this paper we analyze the impact of municipality on Italian Census undercount rates by modeling data from the PES as well as from other sources using Poisson regression trees and hierarchical Poisson models. The Poisson regression trees cluster municipalities into homogeneous groups. The hierarchical Poisson models can be considered as tools for Small Area estimation.

    Release date: 2004-01-27
Reference (2,038)

Reference (2,038) (710 to 720 of 2,038 results)

  • Surveys and statistical programs – Documentation: 62F0026M2005005
    Description:

    This discussion paper reviews the previous research into the subject of presenting historical time series and comparisons in constant dollars for the Survey of Household Spending (SHS), and its predecessor the Family Expenditure Survey (FAMEX). It examines two principal methods of converting spending data into constant dollars. The purpose of this discussion paper is to show interested parties how the two methods differ in complexity of implementation and interpretation.

    Release date: 2005-07-15

  • Surveys and statistical programs – Documentation: 92-404-G
    Description:

    This guide will provide users of census data with an understanding of the differences between the NAICS97 and the SIC80, and the impact of those differences on census industry data.

    Release date: 2005-07-12

  • Surveys and statistical programs – Documentation: 62F0026M2005004
    Description:

    The Food Expenditure Survey (FES) is a periodic survey collecting data from households on food spending habits. Data are collected mainly using weekly diaries of purchases that the respondents must fill in daily during two consecutive weeks.

    This paper presents a detailed description of the methodology of this survey. First, we briefly described the sample design which is mainly based on the plan of the Labour Force Survey. Then we present the methods of collection, data processing, weighting, and variance estimation, as well as the suppression of unreliable data in the tables of estimates.

    Release date: 2005-07-08

  • Surveys and statistical programs – Documentation: 62F0026M2005002
    Description:

    This document will provide an overview of the differences between the old and the new weighting methodologies and the effect of the new weighting system on estimations.

    Release date: 2005-06-30

  • 715. The CRISP-NLSCY files Archived
    Notices and consultations: 12-002-X20050018033
    Description:

    Dr. J. Douglas Willms, and his staff at the Canadian Research Institute for Social Policy (CRISP) at the University of New Brunswick (Fredericton Campus), have developed a set of files for researchers interested in using Statistics Canada's National Longitudinal Survey of Children and Youth (NLSCY) data sets. "The Files" consist of SPSS data and syntax, which are intended to assist researchers in conducting more efficient longitudinal analyses, using NLSCY data.

    Release date: 2005-06-23

  • Surveys and statistical programs – Documentation: 75F0002M2005005
    Description:

    The Survey of Labour and Income Dynamics (SLID) conducts two annual interviews: the Labour interview in January and the Income interview in May. The data are collected using computer-assisted interviewing. Thus there are no paper questionnaires required for data collection. The questions, responses and interview flow for Labour and Income are documented in other SLID research papers. This document presents the information for the 2004 Entry Exit portion of the Labour and the Income interviews (for the 2003 reference year).

    The Entry Exit Component consists of five separate modules. The Entry module is the first set of data collected. It is information collected to update household composition and place of residence. For each person identified in Entry, the Demographics module collects (or updates) the person's name, date of birth, sex and marital status. Then the Relationships module identifies (or updates) the relationship between each respondent and every other household member. Relationship data is not collected in the May Income interview. The Exit module includes questions on who to contact for the next interview and the names, phone numbers and addresses of two contacts to be used only if future tracing of respondents is required. An overview of the Tracing module is also included in this document.

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005006
    Description:

    A preliminary interview of background information is collected for all respondents aged 16 and over, who enter the sample for the Survey of Labour and Income Dynamics (SLID). For the majority of the longitudinal respondents, this occurs when a new panel is introduced and the preliminary information is collected during the first Labour interview. However, all persons living with a longitudinal respondent are also interviewed for SLID. Thus Preliminary interviews are conducted for new household members during their first Labour interview after they join the household. Longitudinal persons who have turned 16 while their household is in the SLID sample are then eligible for SLID interviews so they are asked the Preliminary interview questions during their first Labour interview.

    The purpose of this document is to present the questions, possible responses and question flows for the 2004 Preliminary questionnaire (for the 2003 reference year).

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005007
    Description:

    Every January, the Survey of Labour and Income Dynamics (SLID) Labour interview is conducted using computer-assisted interviewing (CAI). CAI is paperless interviewing. This document is therefore a written approximation of the CAI interview, or the questionnaire.

    A labour interview is collected for all respondents 16 years of age and over. In January, 2004 data was collected for reference year 2003 from panels 3 and 4. Panel 3, in its fifth year, consisted of approximately 17,000 households and panel 4, in its second year, also consisted of approximately 17,000 households.

    This document outlines the structure of the January 2004 Labour interview (for the 2003 reference year) including question wording, possible responses, and flows of questions.

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005008
    Description:

    In May 2004 the Survey of Labour and Income Dynamics (SLID) collected data on income from both its third and fourth panels. Panel 3 was in its fifth year of collection and panel 4 was in its second year.

    Respondents had the option of answering income questions in an interview, or of giving permission to Statistics Canada to allow SLID to use the information on their income tax return.

    The purpose of this document is to present the questions, possible responses and question flows for the 2004 Income questionnaire (for the 2003 reference year).

    Release date: 2005-06-16

  • Notices and consultations: 92-132-X
    Description:

    This report describes the comments received as a result of the second round of the 2006 Census consultations. As with the previous 2006 Census consultation, this second round of consultations integrated discussions on the dissemination program, questionnaire content and census geography. However, the focus of this second round of consultations was placed on the 2001 Census of Population dissemination program and proposed directions for 2006 geography. Consultations were held from January to June 2004. Approximately 1,000 comments were captured through written submissions and the organization of over 40 meetings across Canada.

    This report describes users' feedback on dissemination and geography issues received through this second round of consultations. In addition to user's comments, web metrics information serves as a valuable tool when evaluating the accessibility of public good data tables. Therefore, page view counts have been integrated in this report.

    Some general planning assumptions that focus on the production and dissemination of 2006 Census products are also included in this report.

    Release date: 2005-05-31