Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,380 to 8,390 of 10,894 results)

  • Articles and reports: 75F0002M2004001
    Description:

    The purpose of this document is to describe the detailed methodology and assumptions behind the construction of the market basket measure (MBM) of low income. Also this document will raise some issues and highlight some data limitations related to the MBM.

    The MBM represents the cost of a basket that includes a nutritious diet, clothing and footwear, shelter, transportation, and other necessary goods and services (such as personal care items or household supplies).

    The MBM methodology was developed by the Federal/Provincial/Territorial Working Group on Social Development Research and Information for Human Resources Development Canada (HRDC).

    Release date: 2004-02-04

  • Articles and reports: 88F0006X2004002
    Description:

    This publication explains the estimation procedures used to calculate 2001/02 research and development (R&D) expenditures in the Higher Education sector. The Higher Education Research and Development (HERD) performance figures are estimated using a new technique that was developed in 2000 and first applied to the 1998/99 data. It assumes that the total expenditures on HERD are equal to the sum of

    a) sponsored research (available from Canadian Association of University Business Officers [CAUBO] sources)b) an estimate of indirect expenditures on sponsored researchc) a value for the fraction of faculty time devoted to sponsored and non-sponsored researchd) an estimate of indirect expenditures related to faculty time on researche) teaching hospitals data not included in CAUBO data.

    Release date: 2004-01-28

  • Articles and reports: 88F0006X2004003
    Description:

    This publication presents the national gross domestic expenditures on research and development (GERD) from 1992 to 2003, as well as the provincial GERD from 1992 to 2001. Up until 1985, GERD only included research and development (R&D) expenditures in the Natural Sciences and Engineering (NSE) field. Beginning in 1985, Social Sciences and Humanities (SSH) activities have also been included in GERD. An additional series of tables showing R&D expenditures at the national level in either science from 1963 to 1991, or at the provincial level from 1979 to 1991, may be obtained from the Science and Innovation Surveys Section of the Science, Innovation and Electronic Information Division.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040017871
    Description:

    The higher education sector is composed of "all universities, colleges of technology and other institutes of post-secondary education, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under the direct control of, or administered by, or associated with higher education establishments"1 The higher education sector is one of the sectors that make up the national research and development (R&D) system. For most policy analysis, the R&D system is sub-divided into five performing sectors: the federal government, provincial governments, business enterprise, higher education, and private non-profit. It is also sub-divided into six funding sectors: the five above plus all foreign sources.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040027869
    Geography: Province or territory
    Description:

    Gross domestic expenditures on research and development (GERD) represents total research and development expenditures performed in a country's national territory during a given year. GERD includes research and development performed within a country and funded from abroad but excludes payments sent abroad for research and development performed in other countries.

    Release date: 2004-01-28

  • Articles and reports: 12-001-X20030026777
    Description:

    The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026778
    Description:

    Using both purely design based and model assisted arguments, it is shown that, under conditions of high entropy, the variance of the Horvitz Thompson (HT) estimator depends almost entirely on first order inclusion probabilities. Approximate expressions and estimators are derived for this "high entropy" variance of the HT estimator. Monte Carlo simulation studies are conducted to examine the statistical properties of the proposed variance estimators.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026779
    Description:

    In link-tracing designs, social links are followed from one respondent to another to obtain the sample. For hidden and hard-to-access human populations, such sampling designs are often the only practical way to obtain a sample large enough for an effective study. In this paper, we propose a Bayesian approach for the estimation problem. For studies using link-tracing designs, prior information may be available on the characteristics that one wants to estimate. Using this information effectively via a Bayesian approach should yield better estimators. When the available information is vague, one can use noninformative priors and conduct a sensitivity analysis. In our example we found that the estimators were not sensitive to the specified priors. It is important to note that, under the Bayesian setup, obtaining interval estimates to assess the accuracy of the estimators can be done without much added difficulty. By contrast, such tasks are difficult to perform using the classical approach. In general, a Bayesian analysis yields one distribution (the posterior distribution) for the unknown parameters, and from this a vast number of questions can be answered simultaneously.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026780
    Description:

    Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.

    In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026781
    Description:

    Census counts are known to be inexact based on comparisons of Census and Post Enumeration Survey (PES) figures. In Italy, the role of municipal administrations is crucial for both Census and PES field operations. In this paper we analyze the impact of municipality on Italian Census undercount rates by modeling data from the PES as well as from other sources using Poisson regression trees and hierarchical Poisson models. The Poisson regression trees cluster municipalities into homogeneous groups. The hierarchical Poisson models can be considered as tools for Small Area estimation.

    Release date: 2004-01-27
Reference (2,038)

Reference (2,038) (650 to 660 of 2,038 results)

  • Notices and consultations: 13-605-X20070029640
    Description:

    The expenditure-based gross domestic product (GDP) and associated components will be converted to a 2002 reference year for its volume and price estimates, effective May 31, 2007.

    Release date: 2007-05-16

  • Geographic files and documentation: 92-174-G
    Description:

    This Cartographic Boundary File for Canada contains the boundaries of all 82 census agricultural regions delineated for the 2006 Census of Agriculture together with the shoreline around Canada and the larger inland lakes, all integrated in a single layer. The boundary file co-ordinates are latitude/longitude and are based on the North American Datum of 1983 (NAD83). The file is available in both ARC/INFO Interchange and MapInfo Interchange formats and a reference guide is also provided.

    Release date: 2007-05-16

  • Geographic files and documentation: 92-174-X
    Description:

    This Cartographic Boundary File for Canada contains the boundaries of all 82 census agricultural regions delineated for the 2006 Census of Agriculture together with the shoreline around Canada and the larger inland lakes, all integrated in a single layer. The boundary file co-ordinates are latitude/longitude and are based on the North American Datum of 1983 (NAD83). The file is available in both ARC/INFO Interchange and MapInfo Interchange formats and a reference guide is also provided.

    Release date: 2007-05-16

  • Surveys and statistical programs – Documentation: 71-221-G
    Description:

    The Workplace and Employee Survey Guide contains a dictionary of concepts and covers topics such as survey methodology, data collection, data processing and data quality. It also contains helpful information for researchers wishing to use the microdata.

    Release date: 2007-05-15

  • Surveys and statistical programs – Documentation: 75F0002M2007001
    Description: The Survey of Labour and Income Dynamics (SLID) is a longitudinal survey which collects information related to the standard of living of individuals and their families. By interviewing the same people over a period of six years, changes and the causes of these changes can be monitored.

    A preliminary interview of background information is collected for all respondents aged 16 and over, who enter the SLID sample. Preliminary interviews are conducted for new household members during their first labour and income interview after they join the household. A labour and income interview is collected each year for all respondents 16 years of age and over.

    The purpose of this document is to present the questions, possible responses and question flows for the 2006 preliminary, labour and income questionnaire (for the 2005 reference year).

    Release date: 2007-05-10

  • Surveys and statistical programs – Documentation: 75F0002M2007002
    Description: The Survey of Labour and Income Dynamics (SLID) conducts an annual labour and income interview in January. The data are collected using computer-assisted interviewing; thus there are no paper questionnaires required for data collection. The questions, responses and interview flow for labour and income are documented in another SLID research paper. This document presents the information for the 2006 entry and exit portions of the labour and income interview (for the 2005 reference year).

    The entry exit component consists of five separate modules. The entry module is the first set of data collected. It is information collected to update the place of residence, housing conditions and expenses, as well as the household composition. For each person identified in entry, the demographics module collects (or updates) the person's name, date of birth, sex and marital status. Then the relationships module identifies (or updates) the relationship between each respondent and every other household member. The exit module includes questions on who to contact for the next interview and the names, phone numbers and addresses of two contacts to be used only if future tracing of respondents is required. An overview of the tracing component is also included in this document.

    Release date: 2007-05-10

  • Surveys and statistical programs – Documentation: 15-206-X2007009
    Description: This paper examines the effects of alternative specifications of the user costs of capital on the estimated price and volume indices of capital services. It asks how sensitive the results are to the use of exogenous versus endogenous rates of return, to alternate ways of including capital gains, and to whether corrections are made for tax rates. The paper also examines the effect of the various user cost formulae on the measured multifactor productivity growth.
    Release date: 2007-04-04

  • Geographic files and documentation: 92-145-U
    Description: The Dissemination Area Reference Maps, by Census Subdivisions, for areas outside Census Metropolitan Areas and Census Agglomerations cover areas outside census metropolitan areas and census agglomerations. Each map in this series covers one census subdivision and displays the boundaries and codes of dissemination areas, designated places and their names, as well as urban and rural areas within that census subdivision. There are 4,470 maps in this series.

    The maps also display census subdivision boundaries with street network and other visible features such as railroads, rivers and lakes. The maps are in colour and vary in scale and size; the maximum dimensions are 86 cm by 61 cm (34 inches by 24 inches).

    Dissemination areas reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB), and by non-tracted census agglomerations (92-148-UIB). Together, the three sets of dissemination area maps cover all of Canada.

    A reference guide is available (92-145-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13

  • Geographic files and documentation: 92-146-U
    Description: The Census Tract Reference Maps, by Census Metropolitan Areas or Census Agglomerations cover all 33 census metropolitan areas and the 15 census agglomerations in the Census Tract Program. The maps show the boundaries and names of census tracts and census subdivisions, designated places and their names, as well as urban core, secondary urban core, urban fringe and rural fringe within the census metropolitan areas or census agglomerations, with one to 10 maps covering each area. There are 131 maps in the series and inset maps were created to show detail for the more concentrated areas.

    The maps also display census subdivision boundaries with detailed street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size; the maximum dimensions are 86 cm by 61 cm (34 inches by 24 inches).

    A reference guide is available (92-146-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13

  • Geographic files and documentation: 92-148-U
    Description: The Dissemination Area Reference Maps, by Non-tracted Census Agglomerations cover smaller census agglomerations that are not part of the Census Tract Program. Each map in the series covers one census agglomeration and displays the boundaries and codes of dissemination areas, designated places and their names, urban core, urban fringe and rural fringe, within that census agglomeration. There are 271 maps in this series and inset maps were created to show detail for the more concentrated areas.

    The maps also display census subdivision boundaries with street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size, the maximum dimensions being 86 cm by 61 cm (34 inches by 24 inches).

    Dissemination area reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB) and by census subdivisions for areas outside census metropolitan areas and census agglomerations (92-145-UIB). Together, the three sets of dissemination area maps cover all of Canada.

    A reference guide is available (Catalogue No. 92-145-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13