Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,380 to 8,390 of 10,894 results)

  • Articles and reports: 75F0002M2004001
    Description:

    The purpose of this document is to describe the detailed methodology and assumptions behind the construction of the market basket measure (MBM) of low income. Also this document will raise some issues and highlight some data limitations related to the MBM.

    The MBM represents the cost of a basket that includes a nutritious diet, clothing and footwear, shelter, transportation, and other necessary goods and services (such as personal care items or household supplies).

    The MBM methodology was developed by the Federal/Provincial/Territorial Working Group on Social Development Research and Information for Human Resources Development Canada (HRDC).

    Release date: 2004-02-04

  • Articles and reports: 88F0006X2004002
    Description:

    This publication explains the estimation procedures used to calculate 2001/02 research and development (R&D) expenditures in the Higher Education sector. The Higher Education Research and Development (HERD) performance figures are estimated using a new technique that was developed in 2000 and first applied to the 1998/99 data. It assumes that the total expenditures on HERD are equal to the sum of

    a) sponsored research (available from Canadian Association of University Business Officers [CAUBO] sources)b) an estimate of indirect expenditures on sponsored researchc) a value for the fraction of faculty time devoted to sponsored and non-sponsored researchd) an estimate of indirect expenditures related to faculty time on researche) teaching hospitals data not included in CAUBO data.

    Release date: 2004-01-28

  • Articles and reports: 88F0006X2004003
    Description:

    This publication presents the national gross domestic expenditures on research and development (GERD) from 1992 to 2003, as well as the provincial GERD from 1992 to 2001. Up until 1985, GERD only included research and development (R&D) expenditures in the Natural Sciences and Engineering (NSE) field. Beginning in 1985, Social Sciences and Humanities (SSH) activities have also been included in GERD. An additional series of tables showing R&D expenditures at the national level in either science from 1963 to 1991, or at the provincial level from 1979 to 1991, may be obtained from the Science and Innovation Surveys Section of the Science, Innovation and Electronic Information Division.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040017871
    Description:

    The higher education sector is composed of "all universities, colleges of technology and other institutes of post-secondary education, whatever their source of finance or legal status. It also includes all research institutes, experimental stations and clinics operating under the direct control of, or administered by, or associated with higher education establishments"1 The higher education sector is one of the sectors that make up the national research and development (R&D) system. For most policy analysis, the R&D system is sub-divided into five performing sectors: the federal government, provincial governments, business enterprise, higher education, and private non-profit. It is also sub-divided into six funding sectors: the five above plus all foreign sources.

    Release date: 2004-01-28

  • Stats in brief: 88-001-X20040027869
    Geography: Province or territory
    Description:

    Gross domestic expenditures on research and development (GERD) represents total research and development expenditures performed in a country's national territory during a given year. GERD includes research and development performed within a country and funded from abroad but excludes payments sent abroad for research and development performed in other countries.

    Release date: 2004-01-28

  • Articles and reports: 12-001-X20030026777
    Description:

    The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026778
    Description:

    Using both purely design based and model assisted arguments, it is shown that, under conditions of high entropy, the variance of the Horvitz Thompson (HT) estimator depends almost entirely on first order inclusion probabilities. Approximate expressions and estimators are derived for this "high entropy" variance of the HT estimator. Monte Carlo simulation studies are conducted to examine the statistical properties of the proposed variance estimators.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026779
    Description:

    In link-tracing designs, social links are followed from one respondent to another to obtain the sample. For hidden and hard-to-access human populations, such sampling designs are often the only practical way to obtain a sample large enough for an effective study. In this paper, we propose a Bayesian approach for the estimation problem. For studies using link-tracing designs, prior information may be available on the characteristics that one wants to estimate. Using this information effectively via a Bayesian approach should yield better estimators. When the available information is vague, one can use noninformative priors and conduct a sensitivity analysis. In our example we found that the estimators were not sensitive to the specified priors. It is important to note that, under the Bayesian setup, obtaining interval estimates to assess the accuracy of the estimators can be done without much added difficulty. By contrast, such tasks are difficult to perform using the classical approach. In general, a Bayesian analysis yields one distribution (the posterior distribution) for the unknown parameters, and from this a vast number of questions can be answered simultaneously.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026780
    Description:

    Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.

    In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.

    Release date: 2004-01-27

  • Articles and reports: 12-001-X20030026781
    Description:

    Census counts are known to be inexact based on comparisons of Census and Post Enumeration Survey (PES) figures. In Italy, the role of municipal administrations is crucial for both Census and PES field operations. In this paper we analyze the impact of municipality on Italian Census undercount rates by modeling data from the PES as well as from other sources using Poisson regression trees and hierarchical Poisson models. The Poisson regression trees cluster municipalities into homogeneous groups. The hierarchical Poisson models can be considered as tools for Small Area estimation.

    Release date: 2004-01-27
Reference (2,038)

Reference (2,038) (300 to 310 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-20-00052020002
    Description: This tutorial covers navigating and downloading spatial data from Canada’s Open Maps platform, the integrated geospatial data archive for the federal government. Learn to search and filter for datasets of interest, distinguish different components of spatial datasets, and apply common referencing guides in isolating files that correspond to your area of interest. Procedures for accessing census boundary files and tables from Statistics Canada for integration in GIS are also shown. Ensure to download these and remaining datasets listed at the end of the video for use in following tutorials. Apply these skills to download spatial data relevant to your own areas of work and expertise, from Open Maps and other (e.g. provincial and municipal) geospatial archives in taking full advantage of the diverse and finer-resolution datasets that are publicly available. These skills should enable you to isolate and download a variety of layers, and examine most processes or features of interest.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020003
    Description: In this introductory tutorial, you’ll learn to navigate QGIS’s user-friendly interface, procedures to load spatial datasets in to the program from the Browser Panel and how to order vector layers of different geometry types for visualization in the Map Canvas. Additionally, learn how to save a project file (.qgz) and which properties are retained. Add your spatial data folder as a Favourite in the Browser Panel to facilitate loading data in future projects and tutorials. The demonstrated loading procedures extend to most major spatial formats including ESRI Shapefiles, file geodatabases, geopackages, as well as raster formats such as GeoTIFFs and JPEG2000 files, while those for other files (e.g. web-based and spatial databases) can be consulted in the QGIS user manual and other online resources. Apply these skills to load, toggle, rename and reorder (points above lines above polygons) layers of interest to you. As with other programs, ensure to save your project files frequently.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020004
    Description: This QGIS tutorial demonstrates tools for interacting with spatial data in the map canvas. Follow along as we learn foundational skills, such as changing the extent and scale of the canvas, bookmarking locations for repeated use, and applying interactive tools to select and identify features from selected layers in the Layers Panel. Use the Zoom tools to tailor the canvas to selected datasets or features and help isolate layers, such as those at differing extents, in differing projections, or hidden by other layers. The covered tools and procedures will enable you to quickly assess loaded layers, interactively select features and list their attributes, and prepare layers for mapping (e.g. grouping layers and bookmarking canvas). Note: The Identify tool can also be used on Raster layers, returning the value for the selected cell / pixel.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020005
    Description: Following up from interacting with spatial data in the map canvas, this introductory QGIS tutorial covers additional data and available functions in the attribute table and Layer Properties box of loaded vector layers. Follow along as we introduce the layout of attribute tables and cover functions to select, sort, filter and perform simple edits to features. We’ll also discuss key tabs in the Layer Properties box, which provides summary information (spatial and tabular) on the selected layer and additional functions such as visualizing and joining layers (covered in detail in Tutorials # 9-10, and 12-13 respectively). Apply these procedures to vector layers of thematic relevance to your area of work and expertise in quickly selecting, filtering and updating feature attributes to conform to those of interest within QGIS. We’ll expand directly upon these skills in Demos 7 and 8, where we’ll learn to select features by attributes or criteria of interest, update and add new fields, and edit the attributes for large selections of features.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 75F0002M2020001
    Description:

    This note provides the definition of a first-time homebuyer concept used in the 2018 Canadian Housing Survey (CHS). It also includes the methodology used to identify first-time homebuyers and provides sensitivity analysis under alternative methodologies.

    Release date: 2020-01-15

  • Surveys and statistical programs – Documentation: 12-539-X
    Description:

    This document brings together guidelines and checklists on many issues that need to be considered in the pursuit of quality objectives in the execution of statistical activities. Its focus is on how to assure quality through effective and appropriate design or redesign of a statistical project or program from inception through to data evaluation, dissemination and documentation. These guidelines draw on the collective knowledge and experience of many Statistics Canada employees. It is expected that Quality Guidelines will be useful to staff engaged in the planning and design of surveys and other statistical projects, as well as to those who evaluate and analyze the outputs of these projects.

    Release date: 2019-12-04

  • Surveys and statistical programs – Documentation: 37-20-00012019002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this issue are derived from integrating Postsecondary Student Information System (PSIS) administrative data with other administrative data on earnings. Statistics Canada has derived a series of annual indicators on the labour market outcomes of public postsecondary graduates including median employment income by educational qualification, field of study, age group and sex for Canada, the provinces and the territories combined.
    Release date: 2019-12-04

  • Geographic files and documentation: 92F0138M2019001
    Description:

    This document describes the structure of the Dissemination Geography Unique Identifier (DGUID) used within Statistics Canada to facilitate the linkage of every geographic area maintained by Statistics Canada with data tables that use geographic names in the Common Output Database Repository (CODR).

    Release date: 2019-11-13

  • Surveys and statistical programs – Documentation: 99-011-X
    Description:

    This topic presents data on the Aboriginal peoples of Canada and their demographic characteristics. Depending on the application, estimates using any of the following concepts may be appropriate for the Aboriginal population: (1) Aboriginal identity, (2) Aboriginal ancestry, (3) Registered or Treaty Indian status and (4) Membership in a First Nation or Indian band. Data from the 2011 National Household Survey are available for the geographical locations where these populations reside, including 'on reserve' census subdivisions and Inuit communities of Inuit Nunangat as well as other geographic areas such as the national (Canada), provincial and territorial levels.

    Analytical products

    The analytical document provides analysis on the key findings and trends in the data, and is complimented with the short articles found in NHS in Brief and the NHS Focus on Geography Series.

    Data products

    The NHS Profile is one data product that provides a statistical overview of user selected geographic areas based on several detailed variables and/or groups of variables. Other data products include data tables which represent a series of cross tabulations ranging in complexity and are available for various levels of geography.

    Release date: 2019-10-29

  • Surveys and statistical programs – Documentation: 37-20-00012019001
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this issue are based on the longitudinal Postsecondary Student Information System (PSIS) administrative data files. Statistics Canada has derived a series of annual indicators of public postsecondary students including persistence rates, graduation rates, and average time to graduation by educational qualification, field of study, age group and gender for Canada, the provinces, and the three combined Territories.
    Release date: 2019-10-18