Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,170 to 8,180 of 10,894 results)

  • Articles and reports: 11-522-X20020016729
    Description:

    For most survey samples, if not all, we have to deal with the problem of missing values. Missing values are usually caused by nonresponse (such as refusal of participant or interviewer was unable to contact respondent) but can also be produced at the editing step of the survey in an attempt to resolve problems of inconsistent or suspect responses. The presence of missing values (nonresponse) generally leads to bias and uncertainty in the estimates. To treat this problem, the appropriate use of all available auxiliary information permits the maximum reduction of nonresponse bias and variance. During this presentation, we will define the problem, describe the methodology that SEVANI is based on and discuss potential uses of the system. We will end the discussion by presenting some examples based on real data to illustrate the theory in practice.

    In practice, it is very difficult to estimate the nonresponse bias. However, it is possible to estimate the nonresponse variance by assuming that the bias is negligible. In the last decade, many methods were indeed proposed to estimate this variance, and some of these have been implemented in the System for Estimation of Variance due to Nonresponse and Imputation (SEVANI).

    The methodology used to develop SEVANI is based on the theory of two-phase sampling where we assume that the second phase of selection is nonresponse. However, contrary to two-phase sampling, an imputation or nonresponse model is required for variance estimation. SEVANI also assumes that nonresponse is treated by reweighting respondent units or by imputing their missing values. Three imputation methods are considered: the imputation of an auxiliary variable, regression imputation (deterministic or random) and nearest-neighbour imputation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016730
    Description:

    A wide class of models of interest in social and economic research can be represented by specifying a parametric structure for the covariances of observed variables. The availability of software, such as LISREL (Jöreskog and Sörbom 1988) and EQS (Bentler 1995), has enabled these models to be fitted to survey data in many applications. In this paper, we consider approaches to inference about such models using survey data derived by complex sampling schemes. We consider evidence of finite sample biases in parameter estimation and ways to reduce such biases (Altonji and Segal 1996) and associated issues of efficiency of estimation, standard error estimation and testing. We use longitudinal data from the British Household Panel Survey for illustration. As these data are subject to attrition, we also consider the issue of how to use nonresponse weights in the modelling.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016732
    Description:

    Analysis of dose-response relationships has long been important in toxicology. More recently, this type of analysis has been employed to evaluate public education campaigns. The data that are collected in such evaluations are likely to come from standard household survey designs with all the usual complexities of multiple stages, stratification and variable selection probabilities. On a recent evaluation, a system was developed with the following features: categorization of doses into three or four levels, propensity scoring of dose selection and a new jack-knifed Jonckheere-Terpstra test for a monotone dose-response relationship. This system allows rapid production of tests for monotone dose-response relationships that are corrected both for sample design and for confounding. The focus of this paper will be the results of a Monte-Carlo simulation of the properties of the jack-knifed Jonckheere-Terpstra.

    Moreover, there is no experimental control over dosages and the possibility of confounding variables must be considered. Standard regressions in WESVAR and SUDAAN could be used to determine if there is a linear dose-response relationship while controlling on confounders, but such an approach obviously has low power to detect nonlinear but monotone dose-response relationships and is time-consuming to implement if there are a large number of possible outcomes of interest.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016733
    Description:

    While censuses and surveys are often said to measure populations as they are, most reflect information about individuals as they were at the time of measurement, or even at some prior time point. Inferences from such data therefore should take into account change over time at both the population and individual levels. In this paper, we provide a unifying framework for such inference problems, illustrating it through a diverse series of examples including: (1) estimating residency status on Census Day using multiple administrative records, (2) combining administrative records for estimating the size of the US population, (3) using rolling averages from the American Community Survey, and (4) estimating the prevalence of human rights abuses.

    Specifically, at the population level, the estimands of interest, such as the size or mean characteristics of a population, might be changing. At the same time, individual subjects might be moving in and out of the frame of the study or changing their characteristics. Such changes over time can affect statistical studies of government data that combine information from multiple data sources, including censuses, surveys and administrative records, an increasingly common practice. Inferences from the resulting merged databases often depend heavily on specific choices made in combining, editing and analysing the data that reflect assumptions about how populations of interest change or remain stable over time.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016734
    Description:

    According to recent literature, the calibration method has gained much popularity on survey sampling and calibration estimators are routinely computed by many survey organizations. The choice of calibration variables for all existing approaches, however, remains ad hoc. In this article, we show that the model-calibration estimator for the finite population mean, which was proposed by Wu and Sitter (2001) through an intuitive argument, is indeed optimal among a class of calibration estimators. We further present optimal calibration estimators for the finite population distribution function, the population variance, variance of a linear estimator and other quadratic finite population functions under a unified framework. A limited simulation study shows that the improvement of these optimal estimators over the conventional ones can be substantial. The question of when and how auxiliary information can be used for both the estimation of the population mean using a generalized regression estimator and the estimation of its variance through calibration is addressed clearly under the proposed general methodology. Constructions of proposed estimators under two-phase sampling and some fundamental issues in using auxiliary information from survey data are also addressed under the context of optimal estimation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016735
    Description:

    In the 2001 Canadian Census of Population, calibration or regression estimation was used to calculate a single set of household level weights to be used for all census estimates based on a one in five national sample of more than two million households. Because many auxiliary variables were available, only a subset of them could be used. Otherwise, some of the weights would have been smaller than the number one or even negative. In this technical paper, a forward selection procedure was used to discard auxiliary variables that caused weights to be smaller than one or that caused a large condition number for the calibration weight matrix being inverted. Also, two calibration adjustments were done to achieve close agreement between auxiliary population counts and estimates for small areas. Prior to 2001, the projection generalized regression (GREG) estimator was used and the weights were required to be greater than zero. For the 2001 Census, a switch was made to a pseudo-optimal regression estimator that kept more auxiliary variables and, at the same time, required that the weights be one or more.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016736
    Description:

    The US Census Bureau supports research into an optimal design program as an alternative to its current decennial redesign of demographic surveys. The optimal design program seeks to optimize redesign samples annually and reduce deterioration of the precision of survey estimates.

    Initial research has focussed on the use of multi-agent systems (also known as distributed artificial intelligence) to produce optimal annual samples for all demographic surveys. The first multi-agent system optimizes redesign inputs. It represents each housing unit as an autonomous agent and solves the distributed constrain satisfaction problem (DCSP) to forecast household characteristics that are consistent with recent survey data and estimates. The second multi-agent system selects optimal samples for all demographic surveys. It represents each survey-state pair as a deliberative agent and applies the Bayesian optimization algorithm (BOA) at each design stage to partition the sampling units into sample and non-sample subsets. Thus, sampling units are selected directly, without the need for initial stratification.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016737
    Description:

    If the dataset available to machine learning results from cluster sampling (e.g., patients from a sample of hospital wards), the usual cross-validation error rate estimate can lead to biased and misleading results. In this technical paper, an adapted cross-validation is described for this case. Using a simulation, the sampling distribution of the generalization error rate estimate, under cluster or simple random sampling hypothesis, is compared with the true value. The results highlight the impact of the sampling design on inference: clearly, clustering has a significant impact; the repartition between learning set and test set should result from a random partition of the clusters, not from a random partition of the examples. With cluster sampling, standard cross-validation underestimates the generalization error rate, and is deficient for model selection. These results are illustrated with a real application of automatic identification of spoken language.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016738
    Description: Parental union dissolution has been on the rise in Canada for the last 30 years and the nature and intensity of the fact that children stay with their parents after the family has broken up is now an important issue. Until now, most research on this topic has been done using cross-sectional data. However, the arrangements that separating parents make concerning the physical and financial care of their children are far from static, evolving in response to a variety of changes in the lives of both biological parents, including those occurring as a result of the new conjugal unions mothers and fathers enter into.

    In this paper, we first determine how custody arrangements evolve through time and then examine changes in the frequency of contact that non-resident fathers maintain with their children. In both analyses, particular attention is given to the effect that a new union in the mother's or father's life has on the level of contact that children maintain with the non-custodial parent. We also examine how this varies depending on whether or not the new partner had children from a previous union, and on whether the mother's or father's new union is fertile. Prospective data from the two first waves of the National Longitudinal Survey of Children and Youth (NLSCY) will enable us to compare levels of contact both before and after family recomposition.

    Analyses are conducted using multinomial logit and probit models, and ordered logit and probit models according to the nature of the dependent variables. The observation of some of our dependent variables (e.g., the levels of contact between non-residing fathers and their child) is dependent on a selection process (e.g., that a father not residing with his child at Time 1 does not reside with the child at Time 2). In such cases, analyses are conducted using ordered probit models with selectivity. In all analyses, standard errors are adjusted to account for the sample design.

    Release date: 2004-09-13
Reference (2,038)

Reference (2,038) (970 to 980 of 2,038 results)

  • Surveys and statistical programs – Documentation: 11-522-X19990015658
    Description:

    Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015660
    Description:

    There are many different situations in which one or more files need to be linked. With one file the purpose of the linkage would be to locate duplicates within the file. When there are two files, the linkage is done to identify the units that are the same on both files and thus create matched pairs. Often records that need to be linked do not have a unique identifier. Hierarchical record linkage, probabilistic record linkage and statistical matching are three methods that can be used when there is no unique identifier on the files that need to be linked. We describe the major differences between the methods. We consider how to choose variables to link, how to prepare files for linkage and how the links are identified. As well, we review tips and tricks used when linking files. Two examples, the probabilistic record linkage used in the reverse record check and the hierarchical record linkage of the Business Number (BN) master file to the Statistical Universe File (SUF) of unincorporated tax filers (T1) will be illustrated.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015662
    Description:

    As the availability of both health utilization and outcome information becomes increasingly important to health care researchers and policy makers, the ability to link person-specific health data becomes a critical objective. This type of linkage of population-based administrative health databases has been realized in British Columbia. The database was created by constructing an historical file of all persons registered with the health care system, and then by probabilistically linking various program files to this 'coordinating' file. The first phase of development included the linkage of hospital discharge data, physician billing data, continuing care data, data about drug costs for the elderly, births data and deaths data. The second phase of development has seen the addition data sources external to the Ministry of Health including cancer incidence data, workers' compensation data, and income assistance data.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015664
    Description:

    Much work on probabilistic methods of linkage can be found in the statistical literature. However, although many groups undoubtedly still use deterministic procedures, not much literature is available on these strategies. Furthermore there appears to exist no documentation on the comparison of results for the two strategies. Such a comparison is pertinent in the situation where we have only non-unique identifiers like names, sex, race etc. as common identifiers on which the databases are to be linked. In this work we compare a stepwise deterministic linkage strategy with the probabilistic strategy, as implemented in AUTOMATCH, for such a situation. The comparison was carried out on a linkage between medical records from the Regional Perinatal Intensive Care Centers database and education records from the Florida Department of Education. Social security numbers, available in both databases, were used to decide the true status of the record pair after matching. Match rates and error rates for the two strategies are compared and a discussion of their similarities and differences, strengths and weaknesses is presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015666
    Description:

    The fusion sample obtained by a statistical matching process can be considered a sample out of an artificial population. The distribution of this artificial population is derived. If the correlation between specific variables is the only focus the strong demand for conditional independence can be weakened. In a simulation study the effects of violations of some assumptions leading to the distribution of the artificial population are examined. Finally some ideas concerning the establishing of the claimed conditional independence by latent class analysis are presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015668
    Description:

    Following the problems with estimating underenumeration in the 1991 Census of England and Wales the aim for the 2001 Census is to create a database that is fully adjusted to net underenumeration. To achieve this, the paper investigates weighted donor imputation methodology that utilises information from both the census and census coverage survey (CCS). The US Census Bureau has considered a similar approach for their 2000 Census (see Isaki et al 1998). The proposed procedure distinguishes between individuals who are not counted by the census because their household is missed and those who are missed in counted households. Census data is linked to data from the CCS. Multinomial logistic regression is used to estimate the probabilities that households are missed by the census and the probabilities that individuals are missed in counted households. Household and individual coverage weights are constructed from the estimated probabilities and these feed into the donor imputation procedure.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015670
    Description:

    To reach their target audience efficiently, advertisers and media planners need information on which media their customers use. For instance, they may need to know what percentage of Diet Coke drinkers watch Baywatch, or how many AT&T customers have seen an advertisement for Sprint during the last week. All the relevant data could theoretically be collected from each respondent. However, obtaining full detailed and accurate information would be very expensive. It would also impose a heavy respondent burden under current data collection technology. This information is currently collected through separate surveys in New Zealand and in many other countries. Exposure to the major media is measured continuously, and product usage studies are common. Statistical matching techniques provide a way of combining these separate information sources. The New Zealand television ratings database was combined with a syndicated survey of print readership and product usage, using statistical matching. The resulting Panorama service meets the targeting information needs of advertisers and media planners. It has since been duplicated in Australia. This paper discusses the development of the statistical matching framework for combining these databases, and the heuristics and techniques used. These included an experiment conducted using a screening design to identify important matching variables. Studies evaluating and validating the combined results are also summarized. The following three major evaluation criteria were used; accuracy of combined results, statibility of combined results and the preservation of currency results from the component databases. The paper then discusses how the prerequisites for combining the databases were met. The biggest hurdle at this stage was the differences between the analysis techniques used on the two component databases. Finally, suggestions for developing similar statistical matching systems elsewhere will be given.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015672
    Description:

    Data fusion as discussed here means to create a set of data on not jointly observed variables from two different sources. Suppose for instance that observations are available for (X,Z) on a set of individuals and for (Y,Z) on a different set of individuals. Each of X, Y and Z may be a vector variable. The main purpose is to gain insight into the joint distribution of (X,Y) using Z as a so-called matching variable. At first however, it is attempted to recover as much information as possible on the joint distribution of (X,Y,Z) from the distinct sets of data. Such fusions can only be done at the cost of implementing some distributional properties for the fused data. These are conditional independencies given the matching variables. Fused data are typically discussed from the point of view of how appropriate this underlying assumption is. Here we give a different perspective. We formulate the problem as follows: how can distributions be estimated in situations when only observations from certain marginal distributions are available. It can be solved by applying the maximum entropy criterium. We show in particular that data created by fusing different sources can be interpreted as a special case of this situation. Thus, we derive the needed assumption of conditional independence as a consequence of the type of data available.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015674
    Description:

    The effect of the environment on health is of increasing concern, in particular the effects of the release of industrial pollutants into the air, the ground and into water. An assessment of the risks to public health of any particular pollution source is often made using the routine health, demographic and environmental data collected by government agencies. These datasets have important differences in sampling geography and in sampling epochs which affect the epidemiological analyses which draw them together. In the UK, health events are recorded for individuals, giving cause codes, a data of diagnosis or death, and using the unit postcode as a geographical reference. In contrast, small area demographic data are recorded only at the decennial census, and released as area level data in areas distinct from postcode geography. Environmental exposure data may be available at yet another resolution, depending on the type of exposure and the source of the measurements.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015676
    Description:

    As the population ages, a greater demand for long-term care services and, in particular, nursing homes is expected. Policy analysts continue to search for alternative, less costly forms of care for the elderly and have attempted to develop programs to delay or prevent nursing-home entry. Health care administrators required information for planning the future demand for nursing-home services. This study assesses the relative importance of predisposing, enabling, and need characteristics in predicting and understanding nursing-home entry.

    Release date: 2000-03-02