Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,170 to 8,180 of 10,894 results)

  • Articles and reports: 11-522-X20020016729
    Description:

    For most survey samples, if not all, we have to deal with the problem of missing values. Missing values are usually caused by nonresponse (such as refusal of participant or interviewer was unable to contact respondent) but can also be produced at the editing step of the survey in an attempt to resolve problems of inconsistent or suspect responses. The presence of missing values (nonresponse) generally leads to bias and uncertainty in the estimates. To treat this problem, the appropriate use of all available auxiliary information permits the maximum reduction of nonresponse bias and variance. During this presentation, we will define the problem, describe the methodology that SEVANI is based on and discuss potential uses of the system. We will end the discussion by presenting some examples based on real data to illustrate the theory in practice.

    In practice, it is very difficult to estimate the nonresponse bias. However, it is possible to estimate the nonresponse variance by assuming that the bias is negligible. In the last decade, many methods were indeed proposed to estimate this variance, and some of these have been implemented in the System for Estimation of Variance due to Nonresponse and Imputation (SEVANI).

    The methodology used to develop SEVANI is based on the theory of two-phase sampling where we assume that the second phase of selection is nonresponse. However, contrary to two-phase sampling, an imputation or nonresponse model is required for variance estimation. SEVANI also assumes that nonresponse is treated by reweighting respondent units or by imputing their missing values. Three imputation methods are considered: the imputation of an auxiliary variable, regression imputation (deterministic or random) and nearest-neighbour imputation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016730
    Description:

    A wide class of models of interest in social and economic research can be represented by specifying a parametric structure for the covariances of observed variables. The availability of software, such as LISREL (Jöreskog and Sörbom 1988) and EQS (Bentler 1995), has enabled these models to be fitted to survey data in many applications. In this paper, we consider approaches to inference about such models using survey data derived by complex sampling schemes. We consider evidence of finite sample biases in parameter estimation and ways to reduce such biases (Altonji and Segal 1996) and associated issues of efficiency of estimation, standard error estimation and testing. We use longitudinal data from the British Household Panel Survey for illustration. As these data are subject to attrition, we also consider the issue of how to use nonresponse weights in the modelling.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016732
    Description:

    Analysis of dose-response relationships has long been important in toxicology. More recently, this type of analysis has been employed to evaluate public education campaigns. The data that are collected in such evaluations are likely to come from standard household survey designs with all the usual complexities of multiple stages, stratification and variable selection probabilities. On a recent evaluation, a system was developed with the following features: categorization of doses into three or four levels, propensity scoring of dose selection and a new jack-knifed Jonckheere-Terpstra test for a monotone dose-response relationship. This system allows rapid production of tests for monotone dose-response relationships that are corrected both for sample design and for confounding. The focus of this paper will be the results of a Monte-Carlo simulation of the properties of the jack-knifed Jonckheere-Terpstra.

    Moreover, there is no experimental control over dosages and the possibility of confounding variables must be considered. Standard regressions in WESVAR and SUDAAN could be used to determine if there is a linear dose-response relationship while controlling on confounders, but such an approach obviously has low power to detect nonlinear but monotone dose-response relationships and is time-consuming to implement if there are a large number of possible outcomes of interest.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016733
    Description:

    While censuses and surveys are often said to measure populations as they are, most reflect information about individuals as they were at the time of measurement, or even at some prior time point. Inferences from such data therefore should take into account change over time at both the population and individual levels. In this paper, we provide a unifying framework for such inference problems, illustrating it through a diverse series of examples including: (1) estimating residency status on Census Day using multiple administrative records, (2) combining administrative records for estimating the size of the US population, (3) using rolling averages from the American Community Survey, and (4) estimating the prevalence of human rights abuses.

    Specifically, at the population level, the estimands of interest, such as the size or mean characteristics of a population, might be changing. At the same time, individual subjects might be moving in and out of the frame of the study or changing their characteristics. Such changes over time can affect statistical studies of government data that combine information from multiple data sources, including censuses, surveys and administrative records, an increasingly common practice. Inferences from the resulting merged databases often depend heavily on specific choices made in combining, editing and analysing the data that reflect assumptions about how populations of interest change or remain stable over time.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016734
    Description:

    According to recent literature, the calibration method has gained much popularity on survey sampling and calibration estimators are routinely computed by many survey organizations. The choice of calibration variables for all existing approaches, however, remains ad hoc. In this article, we show that the model-calibration estimator for the finite population mean, which was proposed by Wu and Sitter (2001) through an intuitive argument, is indeed optimal among a class of calibration estimators. We further present optimal calibration estimators for the finite population distribution function, the population variance, variance of a linear estimator and other quadratic finite population functions under a unified framework. A limited simulation study shows that the improvement of these optimal estimators over the conventional ones can be substantial. The question of when and how auxiliary information can be used for both the estimation of the population mean using a generalized regression estimator and the estimation of its variance through calibration is addressed clearly under the proposed general methodology. Constructions of proposed estimators under two-phase sampling and some fundamental issues in using auxiliary information from survey data are also addressed under the context of optimal estimation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016735
    Description:

    In the 2001 Canadian Census of Population, calibration or regression estimation was used to calculate a single set of household level weights to be used for all census estimates based on a one in five national sample of more than two million households. Because many auxiliary variables were available, only a subset of them could be used. Otherwise, some of the weights would have been smaller than the number one or even negative. In this technical paper, a forward selection procedure was used to discard auxiliary variables that caused weights to be smaller than one or that caused a large condition number for the calibration weight matrix being inverted. Also, two calibration adjustments were done to achieve close agreement between auxiliary population counts and estimates for small areas. Prior to 2001, the projection generalized regression (GREG) estimator was used and the weights were required to be greater than zero. For the 2001 Census, a switch was made to a pseudo-optimal regression estimator that kept more auxiliary variables and, at the same time, required that the weights be one or more.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016736
    Description:

    The US Census Bureau supports research into an optimal design program as an alternative to its current decennial redesign of demographic surveys. The optimal design program seeks to optimize redesign samples annually and reduce deterioration of the precision of survey estimates.

    Initial research has focussed on the use of multi-agent systems (also known as distributed artificial intelligence) to produce optimal annual samples for all demographic surveys. The first multi-agent system optimizes redesign inputs. It represents each housing unit as an autonomous agent and solves the distributed constrain satisfaction problem (DCSP) to forecast household characteristics that are consistent with recent survey data and estimates. The second multi-agent system selects optimal samples for all demographic surveys. It represents each survey-state pair as a deliberative agent and applies the Bayesian optimization algorithm (BOA) at each design stage to partition the sampling units into sample and non-sample subsets. Thus, sampling units are selected directly, without the need for initial stratification.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016737
    Description:

    If the dataset available to machine learning results from cluster sampling (e.g., patients from a sample of hospital wards), the usual cross-validation error rate estimate can lead to biased and misleading results. In this technical paper, an adapted cross-validation is described for this case. Using a simulation, the sampling distribution of the generalization error rate estimate, under cluster or simple random sampling hypothesis, is compared with the true value. The results highlight the impact of the sampling design on inference: clearly, clustering has a significant impact; the repartition between learning set and test set should result from a random partition of the clusters, not from a random partition of the examples. With cluster sampling, standard cross-validation underestimates the generalization error rate, and is deficient for model selection. These results are illustrated with a real application of automatic identification of spoken language.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016738
    Description: Parental union dissolution has been on the rise in Canada for the last 30 years and the nature and intensity of the fact that children stay with their parents after the family has broken up is now an important issue. Until now, most research on this topic has been done using cross-sectional data. However, the arrangements that separating parents make concerning the physical and financial care of their children are far from static, evolving in response to a variety of changes in the lives of both biological parents, including those occurring as a result of the new conjugal unions mothers and fathers enter into.

    In this paper, we first determine how custody arrangements evolve through time and then examine changes in the frequency of contact that non-resident fathers maintain with their children. In both analyses, particular attention is given to the effect that a new union in the mother's or father's life has on the level of contact that children maintain with the non-custodial parent. We also examine how this varies depending on whether or not the new partner had children from a previous union, and on whether the mother's or father's new union is fertile. Prospective data from the two first waves of the National Longitudinal Survey of Children and Youth (NLSCY) will enable us to compare levels of contact both before and after family recomposition.

    Analyses are conducted using multinomial logit and probit models, and ordered logit and probit models according to the nature of the dependent variables. The observation of some of our dependent variables (e.g., the levels of contact between non-residing fathers and their child) is dependent on a selection process (e.g., that a father not residing with his child at Time 1 does not reside with the child at Time 2). In such cases, analyses are conducted using ordered probit models with selectivity. In all analyses, standard errors are adjusted to account for the sample design.

    Release date: 2004-09-13
Reference (2,038)

Reference (2,038) (860 to 870 of 2,038 results)

  • Notices and consultations: 13-605-X20020038526
    Description:

    The definition of the Information and communications technologies (ICT) sector will be modified to conform more closely to the international standard developed by the Organisation for Economic Co-operation and Development (OECD). Specifically, libraries and the retailing of ICT commodities will be removed from the aggregation, but due to data limitations we will not include the repair of ICT equipment in our aggregation. The estimates will be reworked back to January 1997.

    Release date: 2002-09-30

  • Surveys and statistical programs – Documentation: 12F0053X
    Description:

    This brochure is intended for anyone interested in a career as a mathematical statistician at Statistics Canada (MA group). It provides an overview of Statistics Canada and the workplace, a description of the type of work done by statisticians, as well as the training and development available to statisticians. It also gives the requirements and a description of the process involved in the annual recruitment of the statisticians (MA group), including the deadline dates for the different steps. Finally, it lists the name, address and phone number of the person in charge of the annual recruitment for the MA program for the given year.

    Release date: 2002-09-18

  • Surveys and statistical programs – Documentation: 11-522-X20010016225
    Description:

    The European Union Labour Forces Survey (LFS) is based on national surveys that were originally very different. For the past decade, under pressure from increasingly demanding users (particularly with respect to timeliness, comparability and flexibility), the LFS has been subjected to a constant process of quality improvement.

    The following topics are presented in this paper:A. the quality improvement process, which comprises screening national survey methods, target structure, legal foundations, quality reports, more accurate and more explicit definitions of components, etc.;B. expected or achieved results, which include an ongoing survey producing quarterly results within reasonable time frames, comparable employment and unemployment rates over time and space in more than 25 countries, specific information on current political topics, etc.;C. continuing shortcomings, such as implementation delays in certain countries, possibilities of longitudinal analysis, public access to microdata, etc.; D. future tasks envisioned, such as adaptation of the list of ISCO and ISCED variables and nomenclatures (to take into account evolution in employment and teaching methods), differential treatment of structural variables and increased recourse to administrative files (to limit respondent burden), harmonization of questionnaires, etc.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 11-522-X20010016229
    Description:

    This paper discusses the approach that Statistics Canada has taken to improve the quality of annual business surveys through their integration in the Unified Enterprise Survey (UES). The primary objective of the UES is to measure the final annual sales of goods and services accurately by province, in sufficient detail and in a timely manner.

    This paper describes the methodological approaches that the UES has used to improve financial and commodity data quality in four broad areas. These include improved coherence of the data collected from different levels of the enterprise, better coverage of industries, better depth of information (in the sense of more content detail and estimates for more detailed domains) and better consistency of the concepts and methods across industries.

    The approach, in achieving quality, has been to (a) establish a base measure of the quality of the business survey program prior to the UES, (b) measure the annual data quality of the UES, and (c) carry out specific studies to better understand the quality of UES data and methods.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 11-522-X20010016234
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    With the goal of obtaining a complete enumeration of the Canadian agricultural sector, the 2001 Census of Agriculture has been conducted using several collection methods. Challenges to the traditional drop-off and mail-back of paper questionnaires in a household-based enumeration have led to the adoption of supplemental methods using newer technologies to maintain the coverage and content of the census. Overall, this mixed-mode data collection process responds to the critical needs of the census programme at various points. This paper examines these data collection methods, several quality assessments, and the future challenges of obtaining a co-ordinated view of the methods' individual approaches to achieving data quality.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 11-522-X20010016269
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    In surveys with low response rates, non-response bias can be a major concern. While it is not always possible to measure the actual bias due to non-response, there are different approaches that help identify potential sources of non-response bias. In the National Center for Education Statistics (NCES), surveys with a response rate lower than 70% must conduct a non-response bias analysis. This paper discusses the different approaches to non-response bias analyses using examples from NCES.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 11-522-X20010016293
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    This paper presents the Second Summit of the Americas Regional Education Indicators Project (PRIE), whose basic goal is to develop a set of comparable indicators for the Americas. This project is led by the Ministry of Education of Chile and has been developed in response to the countries' needs to improve their information systems and statistics. The countries need to construct reliable and relevant indicators to support decisions in education, both within their individual countries and the region as a whole. The first part of the paper analyses the importance of statistics and indicators in supporting educational policies and programs, and describes the present state of the information and statistics systems in these countries. It also discusses the major problems faced by the countries and reviews the countries' experiences in participating in other education indicators' projects or programs, such as the INES Program, WEI Project, MERCOSUR and CREMIS. The second part of the paper examines PRIE's technical co-operation program, its purpose and implementation. The second part also emphasizes how technical co-operation responds to the needs of the countries, and supports them in filling in the gaps in available and reliable data.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 11-522-X20010016308
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    The Census Bureau uses response error analysis to evaluate the effectiveness of survey questions. For a given survey, questions that are deemed critical to the survey or considered problematic from past examination are selected for analysis. New or revised questions are prime candidates for re-interview. Re-interview is a new interview where a subset of questions from the original interview are re-asked to a sample of the survey respondents. For each re-interview question, the proportion of respondents who give inconsistent responses is evaluated. The "Index of Inconsistency" is used as the measure of response variance. Each question is labelled low, moderate, or high in response variance. In high response variance cases, the questions are put through cognitive testing, and modifications to the question are recommended.

    The Schools and Staffing Survey (SASS) sponsored by The National Center for Education Statistics (NCES), is also investigated for response error analysis and the possible relationships between inconsistent responses and characteristics of the schools and teachers in that survey. Results of this analysis can be used to change survey procedures and improve data quality.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 92-379-X
    Description:

    The 2001 Census Handbook is a reference tool covering every aspect of the 2001 Census of Population and Census of Agriculture. It provides an overview of every phase of the census, from content determination to data dissemination. It traces the history of the census from the early days of New France to the present. It also contains information about the protection of confidential information in census questions and variables, along with information about data quality and the possible uses of census data. Also covered are census geography and the range of products and services available from the 2001 Census database.

    This series includes six general reference products: Preview of Products and Services, Census Dictionary, Catalogue, Standard Products Stubsets, Census Handbook and Technical Reports.

    Release date: 2002-08-06

  • Surveys and statistical programs – Documentation: 85-552-X
    Geography: Province or territory
    Description:

    This report presents a description of the organization and operation of provincial and territorial maintenance enforcement programs. It describes the relevant provincial legislation, highlights latest developments, provides a general description of each program, describes how each manages cases, intake/withdrawal procedures, tracing, monitoring, payment processing and enforcement practices. As such, the reader will be able to identify the variations and similarities between the various programs. All of the maintenance enforcement programs rely upon several federal acts to collect, trace and enforce support payments. Therefore, a review of the relevant federal legislation is presented first, followed by a description of each provincial and territorial maintenance enforcement program.

    Release date: 2002-08-01