Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,170 to 8,180 of 10,894 results)

  • Articles and reports: 11-522-X20020016729
    Description:

    For most survey samples, if not all, we have to deal with the problem of missing values. Missing values are usually caused by nonresponse (such as refusal of participant or interviewer was unable to contact respondent) but can also be produced at the editing step of the survey in an attempt to resolve problems of inconsistent or suspect responses. The presence of missing values (nonresponse) generally leads to bias and uncertainty in the estimates. To treat this problem, the appropriate use of all available auxiliary information permits the maximum reduction of nonresponse bias and variance. During this presentation, we will define the problem, describe the methodology that SEVANI is based on and discuss potential uses of the system. We will end the discussion by presenting some examples based on real data to illustrate the theory in practice.

    In practice, it is very difficult to estimate the nonresponse bias. However, it is possible to estimate the nonresponse variance by assuming that the bias is negligible. In the last decade, many methods were indeed proposed to estimate this variance, and some of these have been implemented in the System for Estimation of Variance due to Nonresponse and Imputation (SEVANI).

    The methodology used to develop SEVANI is based on the theory of two-phase sampling where we assume that the second phase of selection is nonresponse. However, contrary to two-phase sampling, an imputation or nonresponse model is required for variance estimation. SEVANI also assumes that nonresponse is treated by reweighting respondent units or by imputing their missing values. Three imputation methods are considered: the imputation of an auxiliary variable, regression imputation (deterministic or random) and nearest-neighbour imputation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016730
    Description:

    A wide class of models of interest in social and economic research can be represented by specifying a parametric structure for the covariances of observed variables. The availability of software, such as LISREL (Jöreskog and Sörbom 1988) and EQS (Bentler 1995), has enabled these models to be fitted to survey data in many applications. In this paper, we consider approaches to inference about such models using survey data derived by complex sampling schemes. We consider evidence of finite sample biases in parameter estimation and ways to reduce such biases (Altonji and Segal 1996) and associated issues of efficiency of estimation, standard error estimation and testing. We use longitudinal data from the British Household Panel Survey for illustration. As these data are subject to attrition, we also consider the issue of how to use nonresponse weights in the modelling.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016732
    Description:

    Analysis of dose-response relationships has long been important in toxicology. More recently, this type of analysis has been employed to evaluate public education campaigns. The data that are collected in such evaluations are likely to come from standard household survey designs with all the usual complexities of multiple stages, stratification and variable selection probabilities. On a recent evaluation, a system was developed with the following features: categorization of doses into three or four levels, propensity scoring of dose selection and a new jack-knifed Jonckheere-Terpstra test for a monotone dose-response relationship. This system allows rapid production of tests for monotone dose-response relationships that are corrected both for sample design and for confounding. The focus of this paper will be the results of a Monte-Carlo simulation of the properties of the jack-knifed Jonckheere-Terpstra.

    Moreover, there is no experimental control over dosages and the possibility of confounding variables must be considered. Standard regressions in WESVAR and SUDAAN could be used to determine if there is a linear dose-response relationship while controlling on confounders, but such an approach obviously has low power to detect nonlinear but monotone dose-response relationships and is time-consuming to implement if there are a large number of possible outcomes of interest.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016733
    Description:

    While censuses and surveys are often said to measure populations as they are, most reflect information about individuals as they were at the time of measurement, or even at some prior time point. Inferences from such data therefore should take into account change over time at both the population and individual levels. In this paper, we provide a unifying framework for such inference problems, illustrating it through a diverse series of examples including: (1) estimating residency status on Census Day using multiple administrative records, (2) combining administrative records for estimating the size of the US population, (3) using rolling averages from the American Community Survey, and (4) estimating the prevalence of human rights abuses.

    Specifically, at the population level, the estimands of interest, such as the size or mean characteristics of a population, might be changing. At the same time, individual subjects might be moving in and out of the frame of the study or changing their characteristics. Such changes over time can affect statistical studies of government data that combine information from multiple data sources, including censuses, surveys and administrative records, an increasingly common practice. Inferences from the resulting merged databases often depend heavily on specific choices made in combining, editing and analysing the data that reflect assumptions about how populations of interest change or remain stable over time.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016734
    Description:

    According to recent literature, the calibration method has gained much popularity on survey sampling and calibration estimators are routinely computed by many survey organizations. The choice of calibration variables for all existing approaches, however, remains ad hoc. In this article, we show that the model-calibration estimator for the finite population mean, which was proposed by Wu and Sitter (2001) through an intuitive argument, is indeed optimal among a class of calibration estimators. We further present optimal calibration estimators for the finite population distribution function, the population variance, variance of a linear estimator and other quadratic finite population functions under a unified framework. A limited simulation study shows that the improvement of these optimal estimators over the conventional ones can be substantial. The question of when and how auxiliary information can be used for both the estimation of the population mean using a generalized regression estimator and the estimation of its variance through calibration is addressed clearly under the proposed general methodology. Constructions of proposed estimators under two-phase sampling and some fundamental issues in using auxiliary information from survey data are also addressed under the context of optimal estimation.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016735
    Description:

    In the 2001 Canadian Census of Population, calibration or regression estimation was used to calculate a single set of household level weights to be used for all census estimates based on a one in five national sample of more than two million households. Because many auxiliary variables were available, only a subset of them could be used. Otherwise, some of the weights would have been smaller than the number one or even negative. In this technical paper, a forward selection procedure was used to discard auxiliary variables that caused weights to be smaller than one or that caused a large condition number for the calibration weight matrix being inverted. Also, two calibration adjustments were done to achieve close agreement between auxiliary population counts and estimates for small areas. Prior to 2001, the projection generalized regression (GREG) estimator was used and the weights were required to be greater than zero. For the 2001 Census, a switch was made to a pseudo-optimal regression estimator that kept more auxiliary variables and, at the same time, required that the weights be one or more.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016736
    Description:

    The US Census Bureau supports research into an optimal design program as an alternative to its current decennial redesign of demographic surveys. The optimal design program seeks to optimize redesign samples annually and reduce deterioration of the precision of survey estimates.

    Initial research has focussed on the use of multi-agent systems (also known as distributed artificial intelligence) to produce optimal annual samples for all demographic surveys. The first multi-agent system optimizes redesign inputs. It represents each housing unit as an autonomous agent and solves the distributed constrain satisfaction problem (DCSP) to forecast household characteristics that are consistent with recent survey data and estimates. The second multi-agent system selects optimal samples for all demographic surveys. It represents each survey-state pair as a deliberative agent and applies the Bayesian optimization algorithm (BOA) at each design stage to partition the sampling units into sample and non-sample subsets. Thus, sampling units are selected directly, without the need for initial stratification.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016737
    Description:

    If the dataset available to machine learning results from cluster sampling (e.g., patients from a sample of hospital wards), the usual cross-validation error rate estimate can lead to biased and misleading results. In this technical paper, an adapted cross-validation is described for this case. Using a simulation, the sampling distribution of the generalization error rate estimate, under cluster or simple random sampling hypothesis, is compared with the true value. The results highlight the impact of the sampling design on inference: clearly, clustering has a significant impact; the repartition between learning set and test set should result from a random partition of the clusters, not from a random partition of the examples. With cluster sampling, standard cross-validation underestimates the generalization error rate, and is deficient for model selection. These results are illustrated with a real application of automatic identification of spoken language.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016738
    Description: Parental union dissolution has been on the rise in Canada for the last 30 years and the nature and intensity of the fact that children stay with their parents after the family has broken up is now an important issue. Until now, most research on this topic has been done using cross-sectional data. However, the arrangements that separating parents make concerning the physical and financial care of their children are far from static, evolving in response to a variety of changes in the lives of both biological parents, including those occurring as a result of the new conjugal unions mothers and fathers enter into.

    In this paper, we first determine how custody arrangements evolve through time and then examine changes in the frequency of contact that non-resident fathers maintain with their children. In both analyses, particular attention is given to the effect that a new union in the mother's or father's life has on the level of contact that children maintain with the non-custodial parent. We also examine how this varies depending on whether or not the new partner had children from a previous union, and on whether the mother's or father's new union is fertile. Prospective data from the two first waves of the National Longitudinal Survey of Children and Youth (NLSCY) will enable us to compare levels of contact both before and after family recomposition.

    Analyses are conducted using multinomial logit and probit models, and ordered logit and probit models according to the nature of the dependent variables. The observation of some of our dependent variables (e.g., the levels of contact between non-residing fathers and their child) is dependent on a selection process (e.g., that a father not residing with his child at Time 1 does not reside with the child at Time 2). In such cases, analyses are conducted using ordered probit models with selectivity. In all analyses, standard errors are adjusted to account for the sample design.

    Release date: 2004-09-13
Reference (2,038)

Reference (2,038) (750 to 760 of 2,038 results)

  • Surveys and statistical programs – Documentation: 81-005-X
    Description:

    This register identifies the universe of all public and not-for-profit postsecondary and adult education institutions in Canada and their programs of study. All programs are classified to the Classification of Instructional Programs (CIP).

    Release date: 2004-12-13

  • Surveys and statistical programs – Documentation: 62F0026M2004003
    Geography: Province or territory
    Description:

    This guide presents information of interest to users of data from the Survey of Household Spending, which gathers information on the spending habits, dwelling characteristics and household equipment of Canadian households.

    This guide includes definitions of survey terms and variables, as well as descriptions of survey methodology and data quality. One section describes the statistics that can be created using expenditure data (e.g., budget share, market share and aggregates).

    Release date: 2004-12-13

  • Surveys and statistical programs – Documentation: 62F0026M2004002
    Description:

    This report reviews the concepts measured and estimates produced by the Survey of Household Spending (SHS), previously called the Family Expenditure Survey (FAMEX), and the Homeowner Repair and Renovation Survey (HRRS).

    Release date: 2004-11-30

  • Surveys and statistical programs – Documentation: 92-394-X
    Description:

    This report deals with coverage errors that occur when persons, households, dwellings or families are missed or enumerated in error by the census. After the 2001 Census was taken, a number of studies were carried out to estimate gross undercoverage, gross overcoverage and net undercoverage. This report presents the results of the Dwelling Classification Study, the Reverse Record Check Study, the Automated Match Study and the Collective Dwelling Study. The report first describes census universes, coverage error and census collection and processing procedures that may result in coverage error. Then it gives estimates of net undercoverage for a number of demographic characteristics. After, the technical report presents the methodology and results of each coverage study and the estimates of coverage error after describing how the results of the various studies are combined. A historical perspective completes the product.

    Release date: 2004-11-25

  • Surveys and statistical programs – Documentation: 92-392-G
    Description:

    This guide presents the census concepts related to schooling and major field of study and describes the evolution of the different issues that concern these concepts. The guide also deals with the comparability of the 2001 Census data on schooling and major field of study with those of previous censuses.

    Release date: 2004-11-23

  • Surveys and statistical programs – Documentation: 96-328-M2004015
    Description:

    This activity focusses on the increase in potato production in Western Canada. It discusses how scientists and growers are discovering that soil and climate conditions in Western Canada are well suited to growing potatoes.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004016
    Geography: Canada
    Description:

    This activity looks at how Canada's grape industry has transformed itself in the wake of the Canada-U.S. Free Trade Agreement.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004017
    Description:

    This activity focusses on the concept of sustainability as it applies to agriculture. To fully understand the concept of sustainability, we need to understand all aspects of it: environmental, economic and social sustainability.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004018
    Description:

    This activity looks at all aspects of organic farming, helping students to understand what 'organic' really means.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004019
    Description:

    This activity focusses on changes in the way in which fruit and vegetable producers are selling their produce. Using the pumpkin industry as a case study, it examines the agri-tourism trend.

    Release date: 2004-10-29