Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,160 to 8,170 of 10,894 results)

  • Articles and reports: 11-522-X20020016719
    Description:

    This study takes a look at the modelling methods used for public health data. Public health has a renewed interest in the impact of the environment on health. Ecological or contextual studies ideally investigate these relationships using public health data augmented with environmental characteristics in multilevel or hierarchical models. In these models, individual respondents in health data are the first level and community data are the second level. Most public health data use complex sample survey designs, which require analyses accounting for the clustering, nonresponse, and poststratification to obtain representative estimates of prevalence of health risk behaviours.

    This study uses the Behavioral Risk Factor Surveillance System (BRFSS), a state-specific US health risk factor surveillance system conducted by the Center for Disease Control and Prevention, which assesses health risk factors in over 200,000 adults annually. BRFSS data are now available at the metropolitan statistical area (MSA) level and provide quality health information for studies of environmental effects. MSA-level analyses combining health and environmental data are further complicated by joint requirements of the survey sample design and the multilevel analyses.

    We compare three modelling methods in a study of physical activity and selected environmental factors using BRFSS 2000 data. Each of the methods described here is a valid way to analyse complex sample survey data augmented with environmental information, although each accounts for the survey design and multilevel data structure in a different manner and is thus appropriate for slightly different research questions.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016720
    Geography: Canada
    Description:

    The objective of this study was to analyse the influence of community on individual health. The new Canadian Community Health Survey (CCHS) was used to derive individual health variables for Canadian residents aged 18 or older while community-level data were obtained from the Canadian 1996 Census of Population. Weighted logistic multilevel models and principal component analysis were used to analyse these data. After controlling for individual variables, there was little variation between communities. However, the influence of the community was more important for people with low family income than those with higher income.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016721
    Description:

    This paper examines the simulation study that was conducted to assess the sampling scheme designed for the World Health Organization (WHO) Injection Safety Assessment Survey. The objective of this assessment survey is to determine whether facilities in which injections are given meet the necessary safety requirements for injection administration, equipment, supplies and waste disposal. The main parameter of interest is the proportion of health care facilities in a country that have safe injection practices.

    The objective of this simulation study was to assess the accuracy and precision of the proposed sampling design. To this end, two artificial populations were created based on the two African countries of Niger and Burkina Faso, in which the pilot survey was tested. To create a wide variety of hypothetical populations, the assignment of whether a health care facility was safe or not was based on the different combinations of the population proportion of safe health care facilities in the country, the homogeneity of the districts in the country with respect to injection safety, and whether the health care facility was located in an urban or rural district.

    Using the results of the simulation, a multi-factor analysis of variance was used to determine which factors affect the outcome measures of absolute bias, standard error and mean-squared error.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016722
    Geography: Canada
    Description:

    Colorectal cancer (CRC) is the second cause of cancer deaths in Canada. Randomized controlled trials (RCT) have shown the efficacy of screening using faecal occult blood tests (FOBT). A comprehensive evaluation of the costs and consequences of CRC screening for the Canadian population is required before implementing such a program. This paper evaluates whether or not the CRC screening is cost-effective. The results of these simulations will be provided to the Canadian National Committee on Colorectal Cancer Screening to help formulate national policy recommendations for CRC screening.

    Statistics Canada's Population Health Microsimulation Model was updated to incorporate a comprehensive CRC screening module based on Canadian data and RCT efficacy results. The module incorporated sensitivity and specificity of FOBT and colonoscopy, participation rates, incidence, staging, diagnostic and therapeutic options, disease progression, mortality and direct health care costs for different screening scenarios. Reproducing the mortality reduction observed in the Funen screening trial validated the model.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016723
    Description:

    Categorical outcomes, such as binary, ordinal and nominal responses, occur often in survey research. Logistic regression investigates the relationship between such categorical responses variables and a set of explanatory variables. The LOGISTIC procedure can be used to perform a logistic analysis on data from a random sample. However, this approach is not valid if the data come from other sample designs, such as complex survey designs with stratification, clustering and/or unequal weighting. In these cases, specialized techniques must be applied in order to produce the appropriate estimates and standard errors.

    The SURVEYLOGISTIC procedure, experimental in Version 9, brings logistic regression for survey data to the SAS System and delivers much of the functionality of the LOGISTIC procedure. This paper describes the methodological approach and applications for this new software.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016724
    Description:

    Some of the most commonly used statistical models are fitted using maximum likelihood (ML) or some extension of ML. Stata's ML command provides researchers and data analysts with a tool to develop estimation commands to fit their models using their data. Such models may include multiple equations, clustered observations, sampling weights and other survey design characteristics. These elements are discussed in this paper.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016725
    Description:

    In 1997, the US Office of Management and Budget issued revised standards for the collection of race information within the federal statistical system. One revision allows individuals to choose more than one race group when responding to federal surveys and other federal data collections. This change presents challenges for analyses that involve data collected under both the old and new race-reporting systems, since the data on race are not comparable. The following paper discusses the problems encountered by these changes and methods developed to overcome them.

    Since most people under both systems report only a single race, a common proposed solution is to try to bridge the transition by assigning a single-race category to each multiple-race reporter under the new system, and to conduct analyses using just the observed and assigned single-race categories. Thus, the problem can be viewed as a missing-data problem, in which single-race responses are missing for multiple-race reporters and needing to be imputed.

    The US Office of Management and Budget suggested several simple bridging methods to handle this missing-data problem. Schenker and Parker (Statistics in Medicine, forthcoming) analysed data from the National Health Interview Survey of the US National Center for Health Statistics, which allows multiple-race reporting but also asks multiple-race reporters to specify a primary race, and found that improved bridging methods could result from incorporating individual-level and contextual covariates into the bridging models.

    While Schenker and Parker discussed only three large multiple-race groups, the current application requires predicting single-race categories for several small multiple-race groups as well. Thus, problems of sparse data arise in fitting the bridging models. We address these problems by building combined models for several multiple-race groups, thus borrowing strength across them. These and other methodological issues are discussed.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016726
    Description:

    Although the use of school vouchers is growing in the developing world, the impact of vouchers is an open question. Any sort of long-term assessment of this activity is rare. This paper estimates the long-term effect of Colombia's PACES program, which provided over 125,000 poor children with vouchers that covered half the cost of private secondary school.

    The PACES program presents an unusual opportunity to assess the effect of demand-side education financing in a Latin American country where private schools educate a substantial proportion of pupils. The program is of special interest because many vouchers were assigned by lottery, so program effects can be reliably assessed.

    We use administrative records to assess the long-term impact of PACES vouchers on high school graduation status and test scores. The principal advantage of administrative records is that there is no loss-to-follow-up and the data are much cheaper than a costly and potentially dangerous survey effort. On the other hand, individual ID numbers may be inaccurate, complicating record linkage, and selection bias contaminates the sample of test-takers. We discuss solutions to these problems. The results suggest that the program increased secondary school completion rates, and that college-entrance test scores were higher for lottery winners than losers.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016727
    Description:

    The census data are widely used in the distribution and targeting of resources at national, regional and local levels. In the United Kingdom (UK), a population census is conducted every 10 years. As time elapses, the census data become outdated and less relevant, thus making the distribution of resources less equitable. This paper examines alternative methods in rectifying this.

    A number of small area methods have been developed for producing postcensal estimates, including the Structural Preserving Estimation technique as a result of Purcell and Kish (1980). This paper develops an alternative approach that is based on a linear mixed modelling approach to producing postcensal estimates. The validity of the methodology is tested on simulated data from the Finnish population register and the technique is applied to producing updated estimates for a number of the 1991 UK census variables.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016728
    Description:

    Nearly all surveys use complex sampling designs to collect data and these data are frequently used for statistical analyses beyond the estimation of simple descriptive parameters of the target population. Many procedures available in popular statistical software packages are not appropriate for this purpose because the analyses are based on the assumption that the sample has been drawn with simple random sampling. Therefore, the results of the analyses conducted using these software packages would not be valid when the sample design incorporates multistage sampling, stratification, or clustering. Two commonly used methods for analysing data from complex surveys are replication and Taylor linearization techniques. We discuss the use of WESVAR software to compute estimates and replicate variance estimates by properly reflecting complex sampling and estimation procedures. We also illustrate the WESVAR features by using data from two Westat surveys that employ complex survey designs: the Third International Mathematics and Science Study (TIMSS) and the National Health and Nutrition Examination Survey (NHANES).

    Release date: 2004-09-13
Reference (2,038)

Reference (2,038) (290 to 300 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-26-0003
    Description:

    Statistics Canada Data Strategy (SCDS) provides a course of action for managing and leveraging the agency’s data assets to ensure their optimal use and value while maintaining public trust. As Statistics Canada is the nation’s trusted provider of high-quality data and information to support evidence-based policy and decision making, the SCDS also naturally includes the agency’s plan for providing support and data expertise to other government organizations (federal, provincial and territorial), non-governmental organizations, the private sector, academia, and other national and international communities).

    The SCDS provides a roadmap for how Statistics Canada will continue to govern and manage its valuable data assets as part of its modernization agenda and in alignment with and response to other federal government strategies and initiatives. These federal strategies include the Data Strategy for the Federal Public Service, Canada’s 2018-2020 National Action Plan on Open Government, and the Treasury Board Secretariat Digital Operations Strategic Plan: 2018-2022.

    Release date: 2020-04-30

  • Surveys and statistical programs – Documentation: 34-26-0002
    Description:

    As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

    This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

    Release date: 2020-04-01

  • Surveys and statistical programs – Documentation: 37-20-00012020001
    Description:

    This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 37-20-00012020002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 89-20-00052020009
    Description: In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.
    Release date: 2020-03-03

  • Surveys and statistical programs – Documentation: 89-20-00052020008
    Description: This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.
    Release date: 2020-02-19

  • 297. Creating Vector Data Archived
    Surveys and statistical programs – Documentation: 89-20-00052020006
    Description: In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

    We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

    In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052020007
    Description: This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.
    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052019001
    Description: In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020001
    Description: This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.
    Release date: 2020-02-17