Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (7,940 to 7,950 of 10,894 results)

  • Articles and reports: 12-001-X20040027747
    Description:

    The reduced accuracy of the revised classification of unemployed persons in the Current Population Survey (CPS) was documented in Biemer and Bushery (2000). In this paper, we provide additional evidence of this anomaly and attempt to trace the source of the error through extended analysis of the CPS data before and after the redesign. The paper presents an novel approach decomposing the error in a complex classification process, such as the CPS labor force status classification, using Markov Latent Class Analysis (MLCA). To identify the cause of the apparent reduction in unemployed classification accuracy, we identify the key question components that determine the classifications and estimate the contribution of each of these question components to the total error in the classification process. This work provides guidance for further investigation into the root causes of the errors in the collection of labor force data in the CPS possibly through cognitive laboratory and/or field experiments.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027749
    Description:

    A simple and practicable algorithm for constructing stratum boundaries in such a way that the coefficients of variation are equal in each stratum is derived for positively skewed populations. The new algorithm is shown to compare favourably with the cumulative root frequency method (Dalenius and Hodges 1957) and the Lavallée and Hidiroglou (1988) approximation method for estimating the optimum stratum boundaries.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027750
    Description:

    Intelligent Character Recognition (ICR) has been widely used as a new technology in data capture processing. It was used for the first time at Statistics Canada to process the 2001 Canadian Census of Agriculture. This involved many new challenges, both operational and methodological. This paper presents an overview of the methodological tools used to put in place an efficient ICR system. Since the potential for high levels of error existed at various stages of the operation, Quality Assurance (QA) and Quality Control (QC) methods and procedures were built into this operation to ensure a high degree of accuracy in the captured data. This paper describes these QA / QC methods along with their results and shows how quality improvements were achieved in the ICR Data Capture operation. This paper also identifies the positive impacts of these procedures on this operation.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027751
    Description:

    We revisit the relationship between the design effects for the weighted total estimator and the weighted mean estimator under complex survey sampling. Examples are provided under various cases. Furthermore, some of the misconceptions surrounding design effects will be clarified with examples.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027752
    Description:

    The Best Linear Unbiased (BLU) estimator (or predictor) of a population total is based on the following two assumptions: i) the estimation model underlying the BLU estimator is correctly specified and ii) the sampling design is ignorable with respect to the estimation model. In this context, an estimator is robust if it stays close to the BLU estimator when both assumptions hold and if it keeps good properties when one or both assumptions are not fully satisfied. Robustness with respect to deviations from assumption (i) is called model robustness while robustness with respect to deviations from assumption (ii) is called design robustness. The Generalized Regression (GREG) estimator is often viewed as being robust since its property of being Asymptotically Design Unbiased (ADU) is not dependent on assumptions (i) and (ii). However, if both assumptions hold, the GREG estimator may be far less efficient than the BLU estimator and, in that sense, it is not robust. The relative inefficiency of the GREG estimator as compared to the BLU estimator is caused by widely dispersed design weights. To obtain a design-robust estimator, we thus propose a compromise between the GREG and the BLU estimators. This compromise also provides some protection against deviations from assumption (i). However, it does not offer any protection against outliers, which can be viewed as a consequence of a model misspecification. To deal with outliers, we use the weighted generalized M-estimation technique to reduce the influence of units with large weighted population residuals. We propose two practical ways of implementing M-estimators for multipurpose surveys; either the weights of influential units are modified and a calibration approach is used to obtain a single set of robust estimation weights or the values of influential units are modified. Some properties of the proposed approach are evaluated in a simulation study using a skewed finite population created from real survey data.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027753
    Description:

    Samplers often distrust model-based approaches to survey inference because of concerns about misspecification when models are applied to large samples from complex populations. We suggest that the model-based paradigm can work very successfully in survey settings, provided models are chosen that take into account the sample design and avoid strong parametric assumptions. The Horvitz-Thompson (HT) estimator is a simple design-unbiased estimator of the finite population total. From a modeling perspective, the HT estimator performs well when the ratios of the outcome values and the inclusion probabilities are exchangeable. When this assumption is not met, the HT estimator can be very inefficient. In Zheng and Little (2003, 2004) we used penalized splines (p-splines) to model smoothly - varying relationships between the outcome and the inclusion probabilities in one-stage probability proportional to size (PPS) samples. We showed that p spline model-based estimators are in general more efficient than the HT estimator, and can provide narrower confidence intervals with close to nominal confidence coverage. In this article, we extend this approach to two-stage sampling designs. We use a p-spline based mixed model that fits a nonparametric relationship between the primary sampling unit (PSU) means and a measure of PSU size, and incorporates random effects to model clustering. For variance estimation we consider the empirical Bayes model-based variance, the jackknife and balanced repeated replication (BRR) methods. Simulation studies on simulated data and samples drawn from public use microdata in the 1990 census demonstrate gains for the model-based p-spline estimator over the HT estimator and linear model-assisted estimators. Simulations also show the variance estimation methods yield confidence intervals with satisfactory confidence coverage. Interestingly, these gains can be seen for a common equal-probability design, where the first stage selection is PPS and the second stage selection probabilities are proportional to the inverse of the first stage inclusion probabilities, and the HT estimator leads to the unweighted mean. In situations that most favor the HT estimator, the model-based estimators have comparable efficiency.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027755
    Description:

    Several statistical agencies use, or are considering the use of, multiple imputation to limit the risk of disclosing respondents' identities or sensitive attributes in public use data files. For example, agencies can release partially synthetic datasets, comprising the units originally surveyed with some collected values, such as sensitive values at high risk of disclosure or values of key identifiers, replaced with multiple imputations. This article presents an approach for generating multiply-imputed, partially synthetic datasets that simultaneously handles disclosure limitation and missing data. The basic idea is to fill in the missing data first to generate m completed datasets, then replace sensitive or identifying values in each completed dataset with r imputed values. This article also develops methods for obtaining valid inferences from such multiply-imputed datasets. New rules for combining the multiple point and variance estimates are needed because the double duty of multiple imputation introduces two sources of variability into point estimates, which existing methods for obtaining inferences from multiply-imputed datasets do not measure accurately. A reference t-distribution appropriate for inferences when m and r are moderate is derived using moment matching and Taylor series approximations.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027756
    Description:

    It is usually discovered in the data collection phase of a survey that some units in the sample are ineligible even if the frame information has indicated otherwise. For example, in many business surveys a nonnegligible proportion of the sampled units will have ceased trading since the latest update of the frame. This information may be fed back to the frame and used in subsequent surveys, thereby making forthcoming samples more efficient by avoiding sampling ineligible units. On the first of two survey occasions, we assume that all ineligible units in the sample (or set of samples) are detected and excluded from the frame. On the second occasion, a subsample of the eligible part is observed again. The subsample may be augmented with a fresh sample that will contain both eligible and ineligible units. We investigate what effect on survey estimation the process of feeding back information on ineligibility may have, and derive an expression for the bias that can occur as a result of feeding back. The focus is on estimation of the total using the common expansion estimator. An estimator that is nearly unbiased in the presence of feed back is obtained. This estimator relies on consistent estimates of the number of eligible and ineligible units in the population being available.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027758
    Description:

    In this article, we study the use of Bayesian neural networks in finite population estimation.We propose estimators for finite population mean and the associated mean squared error. We also propose to use the student t-distribution to model the disturbances in order to accommodate extreme observations that are often present in the data from social sample surveys. Numerical results show that Bayesian neural networks have made a significant improvement in finite population estimation over linear regression based methods

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040029187
    Description:

    In this Issue is a column where the Editor biefly presents each paper of the current issue of Survey Methodology. As well, it sometimes contain informations on structure or management changes in the journal.

    Release date: 2005-02-03
Reference (2,038)

Reference (2,038) (950 to 960 of 2,038 results)

  • Surveys and statistical programs – Documentation: 75F0010X
    Description:

    The publication guides the user through the vast array of labour market and income data sources. It offers detailed descriptions of the various surveys, including the data collected. A summary chart gives snapshot information for comparisons.

    Release date: 2000-09-13

  • Surveys and statistical programs – Documentation: 31-532-G
    Description:

    This practical and informative guide for manufacturers and exporters will assist in navigating through numerous Statistics Canada products and services. In addition, some recent articles and research papers have been highlighted.

    Release date: 2000-07-26

  • Surveys and statistical programs – Documentation: 75F0002M2000010
    Description:

    This report explains the concept of income and provides definitions of the various sources of income and derived income variables. It also documents the various aspects of the census that can have an impact on census income estimates.

    Release date: 2000-07-26

  • Surveys and statistical programs – Documentation: 62F0026M2000001
    Description:

    This guide presents information of interest to users of data from the Survey of Household Spending. Data are collected via personal interviews conducted in January, February and March after the reference year using a paper questionnaire. Information is gathered about the spending habits, dwelling characteristics and household equipment of Canadian households during the reference year. The survey covers private households in the ten provinces and three territories. (The three territories are surveyed every second year.)

    This guide includes definitions of survey terms and variables and descriptions of survey methodology and data quality. There is also a section describing the various statistics that can be created using expenditure data (e.g., budget share, market share, and aggregates).

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 62F0026M2000002
    Description:

    Starting with the 1997 survey year, the Family Expenditure Survey was replaced by the Survey of Household Spending (SHS). This note provides information to users and prospective users of data from the SHS about the differences between the SHS and the former Family Expenditure Survey. Topics covered include sample size, number of questions, coverage, and concepts.

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 62F0026M2000003
    Description:

    Starting with the 1997 survey year, the Household Facilities and Equipment Survey was replaced by the Survey of Household Spending (SHS). This note provides information to users and prospective users of data from the SHS about the differences between the SHS and the former Household Facilities and Equipment Survey. Topics covered include sample size, weighting, collection method, reference period, and concepts.

    Release date: 2000-07-19

  • Surveys and statistical programs – Documentation: 75F0033M2000003
    Geography: Canada
    Description:

    This report provides an overview of an inventory of publicly available data on the nonprofit sector.

    Release date: 2000-06-12

  • Surveys and statistical programs – Documentation: 89F0120X
    Description:

    Direct measures of skill attainment such as the International Adult Literacy Survey are used to assess the importance of educational outcome skills such as literacy in determining labour market outcomes such as earnings. Policy makers also use them to direct resources most efficiently. However, these skill measures are the product of complex statistical procedures. This paper examines the mathematical robustness of the International Adult Literacy Survey measures against other possibilities in estimating the impact of literacy on individual earnings.

    Release date: 2000-06-02

  • Notices and consultations: 13-605-X20000018519
    Description:

    With the release of the first quarter 2000 of the National Income and Expenditure Accounts the sectoring of federal and provincial government, non-autonomous pension plans has changed. These pension plans are now part of the personal sector. Previously these plans were included in either the federal or provincial government sector accounts.

    Release date: 2000-05-31

  • Surveys and statistical programs – Documentation: 82F0081X
    Description:

    The Cancer Record is a newsletter for cancer registries in Canada. Its main purpose is to improve the quality and consistency of data submitted to the Canadian Cancer Registry. The goals of the newsletter are to establish and continue communication among cancer registry personnel, establish a mechanism for identifying and resolving coding or reporting inconsistencies in the national registry and update cancer registries regarding the continued development at the national level.

    Release date: 2000-05-24