Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (7,940 to 7,950 of 10,894 results)

  • Articles and reports: 12-001-X20040027747
    Description:

    The reduced accuracy of the revised classification of unemployed persons in the Current Population Survey (CPS) was documented in Biemer and Bushery (2000). In this paper, we provide additional evidence of this anomaly and attempt to trace the source of the error through extended analysis of the CPS data before and after the redesign. The paper presents an novel approach decomposing the error in a complex classification process, such as the CPS labor force status classification, using Markov Latent Class Analysis (MLCA). To identify the cause of the apparent reduction in unemployed classification accuracy, we identify the key question components that determine the classifications and estimate the contribution of each of these question components to the total error in the classification process. This work provides guidance for further investigation into the root causes of the errors in the collection of labor force data in the CPS possibly through cognitive laboratory and/or field experiments.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027749
    Description:

    A simple and practicable algorithm for constructing stratum boundaries in such a way that the coefficients of variation are equal in each stratum is derived for positively skewed populations. The new algorithm is shown to compare favourably with the cumulative root frequency method (Dalenius and Hodges 1957) and the Lavallée and Hidiroglou (1988) approximation method for estimating the optimum stratum boundaries.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027750
    Description:

    Intelligent Character Recognition (ICR) has been widely used as a new technology in data capture processing. It was used for the first time at Statistics Canada to process the 2001 Canadian Census of Agriculture. This involved many new challenges, both operational and methodological. This paper presents an overview of the methodological tools used to put in place an efficient ICR system. Since the potential for high levels of error existed at various stages of the operation, Quality Assurance (QA) and Quality Control (QC) methods and procedures were built into this operation to ensure a high degree of accuracy in the captured data. This paper describes these QA / QC methods along with their results and shows how quality improvements were achieved in the ICR Data Capture operation. This paper also identifies the positive impacts of these procedures on this operation.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027751
    Description:

    We revisit the relationship between the design effects for the weighted total estimator and the weighted mean estimator under complex survey sampling. Examples are provided under various cases. Furthermore, some of the misconceptions surrounding design effects will be clarified with examples.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027752
    Description:

    The Best Linear Unbiased (BLU) estimator (or predictor) of a population total is based on the following two assumptions: i) the estimation model underlying the BLU estimator is correctly specified and ii) the sampling design is ignorable with respect to the estimation model. In this context, an estimator is robust if it stays close to the BLU estimator when both assumptions hold and if it keeps good properties when one or both assumptions are not fully satisfied. Robustness with respect to deviations from assumption (i) is called model robustness while robustness with respect to deviations from assumption (ii) is called design robustness. The Generalized Regression (GREG) estimator is often viewed as being robust since its property of being Asymptotically Design Unbiased (ADU) is not dependent on assumptions (i) and (ii). However, if both assumptions hold, the GREG estimator may be far less efficient than the BLU estimator and, in that sense, it is not robust. The relative inefficiency of the GREG estimator as compared to the BLU estimator is caused by widely dispersed design weights. To obtain a design-robust estimator, we thus propose a compromise between the GREG and the BLU estimators. This compromise also provides some protection against deviations from assumption (i). However, it does not offer any protection against outliers, which can be viewed as a consequence of a model misspecification. To deal with outliers, we use the weighted generalized M-estimation technique to reduce the influence of units with large weighted population residuals. We propose two practical ways of implementing M-estimators for multipurpose surveys; either the weights of influential units are modified and a calibration approach is used to obtain a single set of robust estimation weights or the values of influential units are modified. Some properties of the proposed approach are evaluated in a simulation study using a skewed finite population created from real survey data.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027753
    Description:

    Samplers often distrust model-based approaches to survey inference because of concerns about misspecification when models are applied to large samples from complex populations. We suggest that the model-based paradigm can work very successfully in survey settings, provided models are chosen that take into account the sample design and avoid strong parametric assumptions. The Horvitz-Thompson (HT) estimator is a simple design-unbiased estimator of the finite population total. From a modeling perspective, the HT estimator performs well when the ratios of the outcome values and the inclusion probabilities are exchangeable. When this assumption is not met, the HT estimator can be very inefficient. In Zheng and Little (2003, 2004) we used penalized splines (p-splines) to model smoothly - varying relationships between the outcome and the inclusion probabilities in one-stage probability proportional to size (PPS) samples. We showed that p spline model-based estimators are in general more efficient than the HT estimator, and can provide narrower confidence intervals with close to nominal confidence coverage. In this article, we extend this approach to two-stage sampling designs. We use a p-spline based mixed model that fits a nonparametric relationship between the primary sampling unit (PSU) means and a measure of PSU size, and incorporates random effects to model clustering. For variance estimation we consider the empirical Bayes model-based variance, the jackknife and balanced repeated replication (BRR) methods. Simulation studies on simulated data and samples drawn from public use microdata in the 1990 census demonstrate gains for the model-based p-spline estimator over the HT estimator and linear model-assisted estimators. Simulations also show the variance estimation methods yield confidence intervals with satisfactory confidence coverage. Interestingly, these gains can be seen for a common equal-probability design, where the first stage selection is PPS and the second stage selection probabilities are proportional to the inverse of the first stage inclusion probabilities, and the HT estimator leads to the unweighted mean. In situations that most favor the HT estimator, the model-based estimators have comparable efficiency.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027755
    Description:

    Several statistical agencies use, or are considering the use of, multiple imputation to limit the risk of disclosing respondents' identities or sensitive attributes in public use data files. For example, agencies can release partially synthetic datasets, comprising the units originally surveyed with some collected values, such as sensitive values at high risk of disclosure or values of key identifiers, replaced with multiple imputations. This article presents an approach for generating multiply-imputed, partially synthetic datasets that simultaneously handles disclosure limitation and missing data. The basic idea is to fill in the missing data first to generate m completed datasets, then replace sensitive or identifying values in each completed dataset with r imputed values. This article also develops methods for obtaining valid inferences from such multiply-imputed datasets. New rules for combining the multiple point and variance estimates are needed because the double duty of multiple imputation introduces two sources of variability into point estimates, which existing methods for obtaining inferences from multiply-imputed datasets do not measure accurately. A reference t-distribution appropriate for inferences when m and r are moderate is derived using moment matching and Taylor series approximations.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027756
    Description:

    It is usually discovered in the data collection phase of a survey that some units in the sample are ineligible even if the frame information has indicated otherwise. For example, in many business surveys a nonnegligible proportion of the sampled units will have ceased trading since the latest update of the frame. This information may be fed back to the frame and used in subsequent surveys, thereby making forthcoming samples more efficient by avoiding sampling ineligible units. On the first of two survey occasions, we assume that all ineligible units in the sample (or set of samples) are detected and excluded from the frame. On the second occasion, a subsample of the eligible part is observed again. The subsample may be augmented with a fresh sample that will contain both eligible and ineligible units. We investigate what effect on survey estimation the process of feeding back information on ineligibility may have, and derive an expression for the bias that can occur as a result of feeding back. The focus is on estimation of the total using the common expansion estimator. An estimator that is nearly unbiased in the presence of feed back is obtained. This estimator relies on consistent estimates of the number of eligible and ineligible units in the population being available.

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040027758
    Description:

    In this article, we study the use of Bayesian neural networks in finite population estimation.We propose estimators for finite population mean and the associated mean squared error. We also propose to use the student t-distribution to model the disturbances in order to accommodate extreme observations that are often present in the data from social sample surveys. Numerical results show that Bayesian neural networks have made a significant improvement in finite population estimation over linear regression based methods

    Release date: 2005-02-03

  • Articles and reports: 12-001-X20040029187
    Description:

    In this Issue is a column where the Editor biefly presents each paper of the current issue of Survey Methodology. As well, it sometimes contain informations on structure or management changes in the journal.

    Release date: 2005-02-03
Reference (2,038)

Reference (2,038) (630 to 640 of 2,038 results)

  • Surveys and statistical programs – Documentation: 15-206-X2007014
    Description: The Canadian Productivity Accounts (CPA) of Statistics Canada maintain two multifactor productivity (MFP) programs.

    The Major Sector Multifactor Productivity Program develops the indexes of MFP for the total business sector and major industry groups in the business sector.

    The Industry Multifactor Productivity Program or the Industry KLEMS Productivity Program develops the industry productivity database that includes MFP indexes, output, capital (K), labour (L), energy (E), materials (M) and services (S) inputs for the individual industries of the business sector at various levels of industry aggregation. This paper describes the methodologies and data sources that are used to construct the major sector MFP indexes and the industry productivity database (or the KLEMS database). More specifically, this paper is meant to: provide a background of the major sector MFP program and the industry KLEMS productivity program; present the methodology for measuring MFP; describe the data sources and data available from the MFP programs; present a quality rating of the industry KLEMS productivity data; and describe the research agenda related to the MFP program.

    Release date: 2007-12-06

  • Surveys and statistical programs – Documentation: 16-001-M2007004
    Description:

    Statistics Canada administers a number of environmental surveys that fill important data gaps but also pose numerous challenges to administer. This paper focuses on two on-going environment surveys - one newly initiated and one in the process of a redesign.

    Release date: 2007-11-23

  • Surveys and statistical programs – Documentation: 11-533-X
    Description:

    This guide has been created especially for users needing a step-by-step review on how to find, read and use data, with quick tips on locating information on the Statistics Canada website. Originally published in paper format in the 1980s, revised as part of the 1994 Statistics Canada Catalogue, and then transformed into an electronic version, this guide is continually being updated to maintain its currency and usefulness.

    Release date: 2007-11-19

  • Surveys and statistical programs – Documentation: 97-553-G
    Description: This guide focuses on the following topic: Family variables.
    Release date: 2007-10-31

  • Surveys and statistical programs – Documentation: 81-595-M2007056
    Geography: Canada
    Description: This handbook discusses the collection and interpretation of statistical data on Canada's trade in culture services.
    Release date: 2007-10-31

  • Surveys and statistical programs – Documentation: 97-553-G2006003
    Description:

    This guide focuses on the following topic: Family variables.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2007-10-31

  • Notices and consultations: 13-605-X200700610374
    Description:

    Effective with the 2006 Provincial Economic Accounts release on November 8, 2007, the expenditure-based gross domestic product (GDP) will be converted to a 2002 reference year for its volume and price estimates.

    On October 31, 2007, the monthly gross domestic product (GDP) by industry estimates will use the North American Industry Classification System, NAICS 2002, and will convert to reference year 2002 for its volume estimates.

    Release date: 2007-10-25

  • Surveys and statistical programs – Documentation: 15-206-X2007012
    Description: This paper examines the various products associated with the quarterly labour productivity program. It outlines the nature of the volatility in the very short-run estimates and examines properties of the revisions made to the estimates of Canadian labour productivity and its components (gross domestic product and hours worked) since the inception of the program in 2001.
    Release date: 2007-10-18

  • Surveys and statistical programs – Documentation: 16-001-M2007003
    Description:

    The objective of the present study is to understand and explain how the Canadian Council of Ministers of the Environment (CCME) Water Quality Index (WQI) behaves, and at the same time determine its limitations to make a better use of it in the future. In order to do so, four data sets were made available to us thanks to participation of the following provinces: Newfoundland, Ontario, British Columbia and Quebec.

    Release date: 2007-09-19

  • Notices and consultations: 11-015-X
    Description: This newsletter is a brief description of projects within the Business and Labour Market Analysis Division of Statistics Canada. The research covers a wide range of topics including labour market issues, low income, immigration, business firm dynamics, pensions, productivity, technology and innovation, as well as economic geography.
    Release date: 2007-09-14