Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (7,580 to 7,590 of 10,894 results)

  • Articles and reports: 12-001-X20050029041
    Description:

    Hot deck imputation is a procedure in which missing items are replaced with values from respondents. A model supporting such procedures is the model in which response probabilities are assumed equal within imputation cells. An efficient version of hot deck imputation is described for the cell response model and a computationally efficient variance estimator is given. An approximation to the fully efficient procedure in which a small number of values are imputed for each nonrespondent is described. Variance estimation procedures are illustrated in a Monte Carlo study.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029044
    Description:

    Complete data methods for estimating the variances of survey estimates are biased when some data are imputed. This paper uses simulation to compare the performance of the model-assisted, the adjusted jackknife, and the multiple imputation methods for estimating the variance of a total when missing items have been imputed using hot deck imputation. The simulation studies the properties of the variance estimates for imputed estimates of totals for the full population and for domains from a single-stage disproportionate stratified sample design when underlying assumptions, such as unbiasedness of the point estimate and item responses being randomly missing within hot deck cells, do not hold. The variance estimators for full population estimates produce confidence intervals with coverage rates near the nominal level even under modest departures from the assumptions, but this finding does not apply for the domain estimates. Coverage is most sensitive to bias in the point estimates. As the simulation demonstrates, even if an imputation method gives almost unbiased estimates for the full population, estimates for domains may be very biased.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029046
    Description:

    Nonresponse weighting is a common method for handling unit nonresponse in surveys. The method is aimed at reducing nonresponse bias, and it is often accompanied by an increase in variance. Hence, the efficacy of weighting adjustments is often seen as a bias-variance trade-off. This view is an oversimplification, nonresponse weighting can in fact lead to a reduction in variance as well as bias. A covariate for a weighting adjustment must have two characteristics to reduce nonresponse bias: it needs to be related to the probability of response, and it needs to be related to the survey outcome. If the latter is true, then weighting can reduce, not increase, sampling variance. A detailed analysis of bias and variance is provided in the setting of weighting for an estimate of a survey mean based on adjustment cells. The analysis suggests that the most important feature of variables for inclusion in weighting adjustments is that they are predictive of survey outcomes; prediction of the propensity to respond is a secondary, though useful, goal. Empirical estimates of root mean squared error for assessing when weighting is effective are proposed and evaluated in a simulation study. A simple composite estimator based on the empirical root mean squared error yields some gains over the weighted estimator in the simulations.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029047
    Description:

    This paper considers the problem of estimating, in the presence of considerable nonignorable nonresponse, the number of private households of various sizes and the total number of households in Norway. The approach is model-based with a population model for household size given registered family size. We account for possible nonresponse biases by modeling the response mechanism conditional on household size. Various models are evaluated together with a maximum likelihood estimator and imputation-based poststratification. Comparisons are made with pure poststratification using registered family size as stratifier and estimation methods used in official statistics for The Norwegian Consumer Expenditure Survey. The study indicates that a modeling approach, including response modeling, poststratification and imputation are important ingredients for a satisfactory approach.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029048
    Description:

    We consider a problem in which an analysis is needed for categorical data from a single two-way table with partial classification (i.e., both item and unit nonresponses). We assume that this is the only information available. A Bayesian methodology permits modeling different patterns of missingness under ignorability and nonignorability assumptions. We construct a nonignorable nonresponse model which is obtained from the ignorable nonresponse model via a model expansion using a data-dependent prior; the nonignorable nonresponse model robustifies the ignorable nonresponse model. A multinomial-Dirichlet model, adjusted for the nonresponse, is used to estimate the cell probabilities, and a Bayes factor is used to test for association. We illustrate our methodology using data on bone mineral density and family income. A sensitivity analysis is used to assess the effects of the data-dependent prior. The ignorable and nonignorable nonresponse models are compared using a simulation study, and there are subtle differences between these models.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029049
    Description:

    Nonresponse weight adjustment is commonly used to compensate for unit nonresponse in surveys. Often, a nonresponse model is postulated and design weights are adjusted by the inverse of estimated response probabilities. Typical nonresponse models are conditional on a vector of fixed auxiliary variables that are observed for every sample unit, such as variables used to construct the sampling design. In this note, we consider using data collection process variables as potential auxiliary variables. An example is the number of attempts to contact a sample unit. In our treatment, these auxiliary variables are taken to be random, even after conditioning on the selected sample, since they could change if the data collection process were repeated for a given sample. We show that this randomness introduces no bias and no additional variance component in the estimates of population totals when the nonresponse model is properly specified. Moreover, when nonresponse depends on the variables of interest, we argue that the use of data collection process variables is likely to reduce the nonresponse bias if they provide information about the variables of interest not already included in the nonresponse model and if they are associated with nonresponse. As a result, data collection process variables may well be beneficial to handle unit nonresponse. This is briefly illustrated using the Canadian Labour Force Survey.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029050
    Description:

    In this paper we make explicit some distributional properties of sample units, not usually found in the literature; in particular, their correlation structure and the fact that it does not depend on arbitrarily assigned population indices. Such properties are relevant to a number of estimation procedures, whose efficiency would benefit from making explicit reference to them.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029051
    Description:

    We present computational algorithms for the recently proposed pseudo empirical likelihood method for the analysis of complex survey data. Several key algorithms for computing the maximum pseudo empirical likelihood estimators and for constructing the pseudo empirical likelihood ratio confidence intervals are implemented using the popular statistical software R and S-PLUS. Major codes are written in the form of R/S-PLUS functions and therefore can directly be used for survey applications and/or simulation studies.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029052
    Description:

    Estimates of a sampling variance-covariance matrix are required in many statistical analyses, particularly for multilevel analysis. In univariate problems, functions relating the variance to the mean have been used to obtain variance estimates, pooling information across units or variables. We present variance and correlation functions for multivariate means of ordinal survey items, both for complete data and for data with structured non-response. Methods are also developed for assessing model fit, and for computing composite estimators that combine direct and model-based predictions. Survey data from the Consumer Assessments of Health Plans Study (CAHPS®) illustrate the application of the methodology.

    Release date: 2006-02-17

  • Articles and reports: 12-001-X20050029053
    Description:

    A spatial regression model in a general mixed effects model framework has been proposed for the small area estimation problem. A common autocorrelation parameter across the small areas has resulted in the improvement of the small area estimates. It has been found to be very useful in the cases where there is little improvement in the small area estimates due to the exogenous variables. A second order approximation to the mean squared error (MSE) of the empirical best linear unbiased predictor (EBLUP) has also been worked out. Using the Kalman filtering approach, a spatial temporal model has been proposed. In this case also, a second order approximation to the MSE of the EBLUP has been obtained. As a case study, the time series monthly per capita consumption expenditure (MPCE) data from the National Sample Survey Organisation (NSSO) of the Ministry of Statistics and Programme Implementation, Government of India, have been used for the validation of the models.

    Release date: 2006-02-17
Reference (2,038)

Reference (2,038) (700 to 710 of 2,038 results)

  • Surveys and statistical programs – Documentation: 62F0026M2005007
    Geography: Province or territory
    Description:

    This guide presents information of interest to users of data from the Survey of Household Spending, which gathers information on the spending habits, dwelling characteristics and household equipment of Canadian households. The survey covers private households in the 10 provinces. (The territories are surveyed every second year, starting in 1999.)

    This guide includes definitions of survey terms and variables, as well as descriptions of survey methodology and data quality. One section describes the various statistics that can be created using expenditure data (e.g., budget share, market share, aggregates and medians).

    Release date: 2005-12-12

  • Surveys and statistical programs – Documentation: 11F0027M2005037
    Description:

    In recent years there has been considerable international interest in key indicators. This paper surveys recent Canadian attempts to develop key indicators of economic, social, environmental or physical well-being. It classifies and discusses over forty such projects and publications in detail; briefly lists a further twenty projects; and provides references to a number of up-to-date surveys and annotated bibliographies which contain additional examples of indicator development in Canada. The paper provides information on a number of research centres working on indicator development and discusses international indicators which are relevant to the Canadian scene, either because they represent 'rototypes' of some particular kind of measure, or else might be regarded as constituting 'best practice' in an area. The paper also examines the motivations behind indicator development and seeks to address the question of whether efforts to extend measurement outside the economic field constitute attempts to "measure the unmeasurable".

    Release date: 2005-11-30

  • Surveys and statistical programs – Documentation: 84-548-X
    Description:

    This report describes the design, methodology, and results of the first study undertaken by Statistics Canada to measure the impact on Canadian cause of death trends of a new revision of the World Health Organization's International Classification of Diseases (ICD).

    Using 1999 Canadian mortality data, Statistics Canada carried out a comparability, or "bridge-coding", study by dual-coding deaths to both the Ninth and Tenth Revisions of the International Classification of Diseases (ICD-9 and ICD-10). The preliminary results of this exercise were used to generate comparability ratios; these ratios measure the net effect of the new revision, with ratios above 1.00 indicating a net increase in deaths classified to a cause of death, and ratios below 1.00 indicating a net decrease.

    The comparability ratios derived from dual-coding medical certificates of cause of death presented in this report estimate the size and direction of the disruption to cause of death trends due to the implementation of ICD-10. Researchers and analysts using Canadian mortality data should use these summary measures to calculate comparability-modified death counts and mortality rates to bridge the gap between ICD-9 and ICD-10.

    Release date: 2005-11-23

  • 704. Economic Conference Archived
    Surveys and statistical programs – Documentation: 11F0024M
    Description:

    This product contains presentations done at Statistics Canada's annual Economic Conference which provides a forum for the exchange of empirical research among the business, government, research and labour communities. The conference is also a means to promote economic and socio-economic analysis while subjecting existing data to critical assessment as part of an ongoing process of statistical development and review.

    Release date: 2005-10-20

  • Surveys and statistical programs – Documentation: 62F0026M2005006
    Description:

    This report describes the quality indicators produced for the 2003 Survey of Household Spending. These quality indicators, such as coefficients of variation, nonresponse rates, slippage rates and imputation rates, help users interpret the survey data.

    Release date: 2005-10-06

  • Surveys and statistical programs – Documentation: 82-619-M2005002
    Description:

    This document examines the functional limitations-physical, emotional and social-related to the most common types of diabetes and the conditions that result from the disease. These functional limitations are described and classified using the Classification and Measurement System of Functional Health (CLAMES).

    These descriptions and classifications are the first step in a new approach to measuring the health of Canadians that examines what factors are adversely affecting population health and how to address them. This document also provides health professionals, advocacy groups, and individual Canadians with an overview of how living with diabetes affects day-to-day functioning.

    Release date: 2005-09-30

  • Surveys and statistical programs – Documentation: 92-133-X
    Description:

    This report describes changes planned for the 2006 Census education questions. Education questions are a part of the Form 2B (the long form) of the census. This form is completed by 20% of all households. These changes were tested in the May 2004 Census test of over 300,000 households. The changes aim to address data limitations in the 2001 Census questions and to enhance their relevance to education studies by allowing a better reflection of the range of educational pathways taken by Canadians. The report includes an explanation of the reasons for modifying the 2006 Census education content, a detailed look at each of the changes, and a discussion on historical consistency.

    Release date: 2005-08-31

  • Surveys and statistical programs – Documentation: 11F0026M2005005
    Description:

    The aim of this paper is to describe the actual methodology used to estimate annual hours worked by industry and province in Canada in view to be consistent with the System of National Accounts.

    Release date: 2005-08-30

  • Surveys and statistical programs – Documentation: 82-619-M2005001
    Description:

    This document examines the functional limitations - physical, emotional and social -experienced by patients at the time of diagnosis of cancer and as they undergo various treatments, remission, and palliative and terminal care. These functional limitations are described and classified using the Classification and Measurement System of Functional Health (CLAMES).

    These descriptions and classifications are the first step in a new approach to measuring the health of Canadians that examines what factors are adversely affecting population health and how to address them. This document also provides health professionals, advocacy groups, and individual Canadians with an overview of how living with cancer affects day-to-day functioning.

    Release date: 2005-08-16

  • Surveys and statistical programs – Documentation: 75F0002M2005009
    Description:

    The release of the 2003 data from the Survey of Labour and Income Dynamics (SLID) was accompanied by a historical revision which accomplished three things. First, the survey weights were updated to take into account new population projections based on the 2001 Census of Population, instead of the 1996 Census. Second, a new procedure in the weight adjustments was introduced to take into account an external source of information on the overall distribution of income in the population, namely the T4 file of employer remittances to Canada Revenue Agency. Third, the low income estimates were revised due to new low income cut-offs (LICOs). This paper describes the second of these improvements' the new weighting procedure to reflect the distribution of income in the population with greater accuracy. Part 1 explains in non-technical terms how this new procedure came about and how it works. Part 2 provides some examples of the impacts on the results for previous years.

    Release date: 2005-07-22