Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (750 to 760 of 13,366 results)

  • Table: 37-10-0277-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Postsecondary enrolments, by detailed field of study, institution, institution type, registration status, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 37-10-0277-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: College enrolments, by detailed field of study, institution, institution type, registration status, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 37-10-0277-03
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: University enrolments by detailed field of study, institution, institution type, registration status, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 37-10-0278-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Postsecondary graduates, by detailed field of study, institution, institution type, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 37-10-0278-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: College graduates by detailed field of study, institution, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 37-10-0278-03
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: University graduates by detailed field of study, institution, program type, credential type, status of student in Canada and gender.
    Release date: 2026-10-01

  • Table: 42-10-0107-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Number and percentage of children and youth aged 1 to 17 years for Shared Health Priorities indicators, by age group, gender, visible minority group, place of residence, and income quintile, Canada (excluding the Territories) and provinces. The included Shared Health Priorities indicators relate to timely access to primary health care, culturally sensitive care, and unmet needs for mental health care among those with a mental health disorder.
    Release date: 2026-09-29

  • Table: 18-10-0181-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    Freight Rail Services Price Index (FRSPI). Quarterly data are available from Q1 2018. The current base period for the index is 2018=100.

    Release date: 2026-09-29

  • Table: 18-10-0181-02
    Geography: Canada
    Frequency: Quarterly
    Description:

    Freight Rail Services Price Index (FRSPI). Quarterly data are available from Q1 2018. The table presents quarter-to-quarter and year-to-year percentage changes for various aggregation levels. The current base period for the index is 2018=100.

    Release date: 2026-09-29

  • Table: 21-10-0068-01
    Geography: Canada, Province or territory
    Frequency: Every 2 years
    Description: The summary statistics by North American Industry Classification System (NAICS) which include: operating revenue (dollars x 1,000,000), operating expenses (dollars x 1,000,000), salaries wages and benefits (dollars x 1,000,000), and operating profit margin (by percent), of motion picture and video distribution (NAICS 512120), annual, for five years of data.
    Release date: 2026-09-29
Analysis (10,894)

Analysis (10,894) (160 to 170 of 10,894 results)

  • Articles and reports: 12-001-X202600100002
    Description: Survey data typically have missing values due to unit and item nonresponse. Sometimes, survey organizations know the marginal distributions of certain categorical variables in the target population. As shown in previous work, survey organizations can leverage these distributions in multiple imputation for nonignorable unit nonresponse, generating imputations that result in plausible completed-data estimates for the variables with known margins. However, this prior work does not use the design weights for unit nonrespondents. We extend this previous work to utilize the design weights for all sampled units. We illustrate the approach using simulation studies.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100003
    Description: Probability-proportional-to-size sampling is widely used by national statistical offices. Here population units are selected with probabilities proportional to an auxiliary variable. Variance formulas in such designs require both first- and second-order inclusion probabilities. The computation of second-order inclusion probabilities is particularly challenging for large populations, and has been the subject of extensive research. This article presents some new exact and approximation formulas for second-order inclusion probabilities in randomized systematic sampling with unequal probabilities and without replacement.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100004
    Description: We test the notion that a quasi-probabilistic method of selecting individuals within households (last birthday, LB) draws in a different sample compared to a non-probabilistic approach that selects respondents according to known parameters on age and gender (frequency matching, FM). With data from an original field experiment, we evaluate fieldwork efficiency (time and completed cases), economy (cost), success in recruiting a representative sample, and differences across a set of attitudinal and behavioral measures. We find that the FM approach performs better on efficiency and cost and achieves a comparable sample; importantly, this comparability extends across measures of personality traits and public opinion. With appropriate caveats, we conclude that researchers’ choice of selection methods should be guided by both theoretical benefits and practical tradeoffs.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100005
    Description: Confidence intervals are very often constructed based on a probability distribution that uses a certain number of degrees of freedom as a parameter. This is the case with the Student and the modified Wilson confidence intervals, discussed in this article, which use quantiles from the Student distribution where the number of degrees of freedom is generally unknown. For the length of a confidence interval to be representative of the reliability of an estimate, the actual coverage rate must match the nominal rate. To that end, the number of degrees of freedom in the probability distribution used in practice to calculate the confidence interval must be estimated as precisely as possible. An approximate rule is often used, although it tends to overestimate the actual number of degrees of freedom. In this article, a more precise version of degrees of freedom, derived from the Satterthwaite approximation, is obtained in the context of the Canadian Census of Population. The sampling design is equivalent to a simple random design without replacement, cluster-stratified, and the variance estimation method is an adaptation of the balanced repeated replication method. An explicit expression of the degrees of freedom is obtained under these conditions, enabling the factors influencing them to be identified. For comparison, the degree of freedom formula is also established for the conventional variance estimator. A simulation study shows that using this version of degrees of freedom corrects the undercoverage problem observed with the approximate rule, showing the importance of accurately assessing this number.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100006
    Description: We introduce a general framework for constructing master samples that preserve desirable design properties across panels. The core procedure is to order an initial probability sample. Since the final sequence must be robust to a uniform random rotation, we define and minimize an objective that aggregates panel-level performance across all possible circular panels. A final random rotation is applied to ensure design validity. The framework is flexible with respect to the choice of design criteria, such as spatial balance or marginal balance, and can be implemented efficiently using simulated annealing to obtain high-quality approximate solutions. By construction, the approach supports both positive and negative sample coordination for spatially balanced, marginally balanced, and doubly balanced samples. The method’s versatility is demonstrated through three applications: constructing a master sample with spatially balanced panels, marginally balanced panels, and doubly balanced panels.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100007
    Description: National statistical institutes operate sample coordination systems to spread the response burden in business surveys. Despite the applied sample coordination and monitoring the response burden, some businesses might still be heavily sampled within a short period. This may lead to a peaking response burden for individual businesses, which could affect response rates and response quality. This paper proposes a new sample coordination method based on Adapted Spatially Correlated Poisson (ASCP) sampling that focuses on businesses with a high response burden. The effects on the response burden will be evaluated in two simulation studies and compared with a stratified approach, a pragmatic method in which sampling fractions are manually adjusted and with the baseline method of ignoring the response burden. For the simulations, real-world scenarios and data from Statistics Netherlands are used. The first simulation study considers a practical situation in which a given sample is adjusted with the aim to avoid the occurrence of businesses with a peaking response burden. The second simulation study analyzes the longer-term effects of the different sample coordination methods and focuses both on the reduction and spread of the response burden. The advantages and disadvantages of the different methods will be explained and discussed in detail, and recommendations for applying these methods at national statistical institutes and other survey agencies will be given.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100008
    Description: This paper introduces an innovative and intuitive finite population sampling method that has been developed using a unique graphical framework. In this approach, first-order inclusion probabilities are represented as bars on a two-dimensional graph. By manipulating the positions of these bars, researchers can create a wide range of different sampling designs. This graphical visualization of sampling designs facilitates the exploration of alternative designs and may simplify certain aspects of the implementation compared to traditional mathematical algorithms. This novel approach holds significant promise for tackling complex challenges in sampling, such as achieving an optimal design. By applying a version of the greedy best-first search algorithm to this graphical approach, the potential for integrating intelligent algorithms into finite population sampling is demonstrated.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100009
    Description: Combining estimates from independent surveys via inverse-variance weights can lead to negative bias when unknown variances are estimated and the target variable is non-negative and positively skewed. In such cases, strong positive correlations typically arise between the estimators and their corresponding variance estimators, causing standard linear combinations with inverse-variance weights to exhibit negative bias. We introduce a strikingly simple method to reduce bias: replace the standard weight with the ratio of the estimator to the variance estimator. Under a linear model linking the two, we show that the new ratio-weighted estimator is approximately unbiased, whereas the conventional inverse-variance combination exhibits downward bias. Through simulations, we demonstrate that the new method brings both the bias and the mean squared error closer to the optimum for a wide range of different target variables. As our method uses only standardly reported summary statistics, it can be immediately adopted to reduce this widespread bias and improve the reliability of scientific findings in various fields.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100010
    Description: With the exception of two-phase sampling, the standard variance approximation of the generalized regression (GREG) estimator assumes that the population totals in the weighting scheme are observed without error. If the weighting model of the GREG estimator contains population totals that are observed with measurement error sources other than the sampling error of first-phase estimates, then this uncertainty will be ignored by the variance approximation of the GREG estimator. This paper proposes a variance approximation for the GREG estimator that accounts for additional uncertainty arising from measurement error in one or more of the population totals used in the weighting scheme. This approach has been developed for, and is being applied to, the Dutch Labour Force Survey (DLFS). The monthly publications of the DLFS are obtained with a time series model, which corrects for rotation group bias and discontinuities caused by major redesigns and the loss of face-to-face interviews during COVID-19. The GREG estimates for the quarterly figures are benchmarked to the average of the monthly publications to enforce numerical consistency between monthly and quarterly publication tables. The standard variance approximation of the GREG estimator assumes that these population totals are observed without error. This results in an underestimation of the variance of the GREG estimator. The variance approximation proposed in this paper results in more realistic standard errors for the quarterly GREG estimates.
    Release date: 2026-06-29

  • Articles and reports: 12-001-X202600100011
    Description: We construct a hybrid Bayesian method, which includes a differentially private mechanism, to mask Census county totals for a U.S. state on acreage of a commodity. We use surrogates for data collected at the farm level from a past U.S. Census of Agriculture to illustrate our procedure. We use two Bayesian small area models (parametric and mixture) to accommodate the smaller counties with fewer farms and some counties with large acres. In these models, the Laplace distribution provides a differentially private mechanism. In pre-processing, we also incorporate the Census weights to form the observed total acreage, a scaling factor to the Laplace mechanism for each county, a square-root transformation of the observed total acreage to avoid negative masked estimates especially for small counties, and the p-percent rule and the 3+ rule to partition the counties into suppressed counties, non-sensitive counties and sensitive counties. Because of difficulties in specifying and tuning the privacy budget (an unknown parameter), to balance security and utility, we specify a prior for the privacy budget, where the values are not specified, and the Gibbs sampler is used to fit the hierarchical Bayesian models. In post-processing, we use Bayesian predictive inference to obtain masked county acreages, and this includes a benchmarking so that the masked state total matches the observed state total. As a measure of reliability of the Bayesian procedure, we use the posterior coefficients of variation for the masked posterior means of the counties. As a measure of utility, we use the absolute relative errors for the individual counties, together with other global measures. For the sensitive counties, there are some differences between the two small area models but both are much better than an individual area model; the mixture model being the best compromise for security and utility.
    Release date: 2026-06-29
Reference (2,038)

Reference (2,038) (970 to 980 of 2,038 results)

  • Surveys and statistical programs – Documentation: 11-522-X19990015658
    Description:

    Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015660
    Description:

    There are many different situations in which one or more files need to be linked. With one file the purpose of the linkage would be to locate duplicates within the file. When there are two files, the linkage is done to identify the units that are the same on both files and thus create matched pairs. Often records that need to be linked do not have a unique identifier. Hierarchical record linkage, probabilistic record linkage and statistical matching are three methods that can be used when there is no unique identifier on the files that need to be linked. We describe the major differences between the methods. We consider how to choose variables to link, how to prepare files for linkage and how the links are identified. As well, we review tips and tricks used when linking files. Two examples, the probabilistic record linkage used in the reverse record check and the hierarchical record linkage of the Business Number (BN) master file to the Statistical Universe File (SUF) of unincorporated tax filers (T1) will be illustrated.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015662
    Description:

    As the availability of both health utilization and outcome information becomes increasingly important to health care researchers and policy makers, the ability to link person-specific health data becomes a critical objective. This type of linkage of population-based administrative health databases has been realized in British Columbia. The database was created by constructing an historical file of all persons registered with the health care system, and then by probabilistically linking various program files to this 'coordinating' file. The first phase of development included the linkage of hospital discharge data, physician billing data, continuing care data, data about drug costs for the elderly, births data and deaths data. The second phase of development has seen the addition data sources external to the Ministry of Health including cancer incidence data, workers' compensation data, and income assistance data.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015664
    Description:

    Much work on probabilistic methods of linkage can be found in the statistical literature. However, although many groups undoubtedly still use deterministic procedures, not much literature is available on these strategies. Furthermore there appears to exist no documentation on the comparison of results for the two strategies. Such a comparison is pertinent in the situation where we have only non-unique identifiers like names, sex, race etc. as common identifiers on which the databases are to be linked. In this work we compare a stepwise deterministic linkage strategy with the probabilistic strategy, as implemented in AUTOMATCH, for such a situation. The comparison was carried out on a linkage between medical records from the Regional Perinatal Intensive Care Centers database and education records from the Florida Department of Education. Social security numbers, available in both databases, were used to decide the true status of the record pair after matching. Match rates and error rates for the two strategies are compared and a discussion of their similarities and differences, strengths and weaknesses is presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015666
    Description:

    The fusion sample obtained by a statistical matching process can be considered a sample out of an artificial population. The distribution of this artificial population is derived. If the correlation between specific variables is the only focus the strong demand for conditional independence can be weakened. In a simulation study the effects of violations of some assumptions leading to the distribution of the artificial population are examined. Finally some ideas concerning the establishing of the claimed conditional independence by latent class analysis are presented.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015668
    Description:

    Following the problems with estimating underenumeration in the 1991 Census of England and Wales the aim for the 2001 Census is to create a database that is fully adjusted to net underenumeration. To achieve this, the paper investigates weighted donor imputation methodology that utilises information from both the census and census coverage survey (CCS). The US Census Bureau has considered a similar approach for their 2000 Census (see Isaki et al 1998). The proposed procedure distinguishes between individuals who are not counted by the census because their household is missed and those who are missed in counted households. Census data is linked to data from the CCS. Multinomial logistic regression is used to estimate the probabilities that households are missed by the census and the probabilities that individuals are missed in counted households. Household and individual coverage weights are constructed from the estimated probabilities and these feed into the donor imputation procedure.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015670
    Description:

    To reach their target audience efficiently, advertisers and media planners need information on which media their customers use. For instance, they may need to know what percentage of Diet Coke drinkers watch Baywatch, or how many AT&T customers have seen an advertisement for Sprint during the last week. All the relevant data could theoretically be collected from each respondent. However, obtaining full detailed and accurate information would be very expensive. It would also impose a heavy respondent burden under current data collection technology. This information is currently collected through separate surveys in New Zealand and in many other countries. Exposure to the major media is measured continuously, and product usage studies are common. Statistical matching techniques provide a way of combining these separate information sources. The New Zealand television ratings database was combined with a syndicated survey of print readership and product usage, using statistical matching. The resulting Panorama service meets the targeting information needs of advertisers and media planners. It has since been duplicated in Australia. This paper discusses the development of the statistical matching framework for combining these databases, and the heuristics and techniques used. These included an experiment conducted using a screening design to identify important matching variables. Studies evaluating and validating the combined results are also summarized. The following three major evaluation criteria were used; accuracy of combined results, statibility of combined results and the preservation of currency results from the component databases. The paper then discusses how the prerequisites for combining the databases were met. The biggest hurdle at this stage was the differences between the analysis techniques used on the two component databases. Finally, suggestions for developing similar statistical matching systems elsewhere will be given.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015672
    Description:

    Data fusion as discussed here means to create a set of data on not jointly observed variables from two different sources. Suppose for instance that observations are available for (X,Z) on a set of individuals and for (Y,Z) on a different set of individuals. Each of X, Y and Z may be a vector variable. The main purpose is to gain insight into the joint distribution of (X,Y) using Z as a so-called matching variable. At first however, it is attempted to recover as much information as possible on the joint distribution of (X,Y,Z) from the distinct sets of data. Such fusions can only be done at the cost of implementing some distributional properties for the fused data. These are conditional independencies given the matching variables. Fused data are typically discussed from the point of view of how appropriate this underlying assumption is. Here we give a different perspective. We formulate the problem as follows: how can distributions be estimated in situations when only observations from certain marginal distributions are available. It can be solved by applying the maximum entropy criterium. We show in particular that data created by fusing different sources can be interpreted as a special case of this situation. Thus, we derive the needed assumption of conditional independence as a consequence of the type of data available.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015674
    Description:

    The effect of the environment on health is of increasing concern, in particular the effects of the release of industrial pollutants into the air, the ground and into water. An assessment of the risks to public health of any particular pollution source is often made using the routine health, demographic and environmental data collected by government agencies. These datasets have important differences in sampling geography and in sampling epochs which affect the epidemiological analyses which draw them together. In the UK, health events are recorded for individuals, giving cause codes, a data of diagnosis or death, and using the unit postcode as a geographical reference. In contrast, small area demographic data are recorded only at the decennial census, and released as area level data in areas distinct from postcode geography. Environmental exposure data may be available at yet another resolution, depending on the type of exposure and the source of the measurements.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015676
    Description:

    As the population ages, a greater demand for long-term care services and, in particular, nursing homes is expected. Policy analysts continue to search for alternative, less costly forms of care for the elderly and have attempted to develop programs to delay or prevent nursing-home entry. Health care administrators required information for planning the future demand for nursing-home services. This study assesses the relative importance of predisposing, enabling, and need characteristics in predicting and understanding nursing-home entry.

    Release date: 2000-03-02