Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (2,480 to 2,490 of 10,894 results)

  • Articles and reports: 12-001-X202100100004
    Description: Multiple data sources are becoming increasingly available for statistical analyses in the era of big data. As an important example in finite-population inference, we consider an imputation approach to combining data from a probability survey and big found data. We focus on the case when the study variable is observed in the big data only, but the other auxiliary variables are commonly observed in both data. Unlike the usual imputation for missing data analysis, we create imputed values for all units in the probability sample. Such mass imputation is attractive in the context of survey data integration (Kim and Rao, 2012). We extend mass imputation as a tool for data integration of survey data and big non-survey data. The mass imputation methods and their statistical properties are presented. The matching estimator of Rivers (2007) is also covered as a special case. Variance estimation with mass-imputed data is discussed. The simulation results demonstrate the proposed estimators outperform existing competitors in terms of robustness and efficiency.
    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100005
    Description:

    Bayesian pooling strategies are used to solve precision problems related to statistical analyses of data from small areas. In such cases, the subpopulation samples are usually small, even though the population might not be. As an alternative, similar data can be pooled in order to reduce the number of parameters in the model. Many surveys consist of categorical data on each area, collected into a contingency table. We consider hierarchical Bayesian pooling models with a Dirichlet process prior for analyzing categorical data based on small areas. However, the prior used to pool such data frequently results in an overshrinkage problem. To mitigate for this problem, the parameters are separated into global and local effects. This study focuses on data pooling using a Dirichlet process prior. We compare the pooling models using bone mineral density (BMD) data taken from the Third National Health and Nutrition Examination Survey for the period 1988 to 1994 in the United States. Our analyses of the BMD data are performed using a Gibbs sampler and slice sampling to carry out the posterior computations.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100006
    Description:

    It is now possible to manage surveys using statistical models and other tools that can be applied in real time. This paper focuses on three developments that reflect the attempt to take a more scientific approach to the management of survey field work: 1) the use of responsive and adaptive designs to reduce nonresponse bias, other sources of error, or costs; 2) optimal routing of interviewer travel to reduce costs; and 3) rapid feedback to interviewers to reduce measurement error. The article begins by reviewing experiments and simulation studies examining the effectiveness of responsive and adaptive designs. These studies suggest that these designs can produce modest gains in the representativeness of survey samples or modest cost savings, but can also backfire. The next section of the paper examines efforts to provide interviewers with a recommended route for their next trip to the field. The aim is to bring interviewers’ field work into closer alignment with research priorities while reducing travel time. However, a study testing this strategy found that interviewers often ignore such instructions. Then, the paper describes attempts to give rapid feedback to interviewers, based on automated recordings of their interviews. Interviewers often read questions in ways that affect respondents’ answers; correcting these problems quickly yielded marked improvements in data quality. All of the methods are efforts to replace the judgment of interviewers, field supervisors, and survey managers with statistical models and scientific findings.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100007
    Description:

    We consider the estimation of a small area mean under the basic unit-level model. The sum of the resulting model-dependent estimators may not add up to estimates obtained with a direct survey estimator that is deemed to be accurate for the union of these small areas. Benchmarking forces the model-based estimators to agree with the direct estimator at the aggregated area level. The generalized regression estimator is the direct estimator that we benchmark to. In this paper we compare small area benchmarked estimators based on four procedures. The first procedure produces benchmarked estimators by ratio adjustment. The second procedure is based on the empirical best linear unbiased estimator obtained under the unit-level model augmented with a suitable variable that ensures benchmarking. The third procedure uses pseudo-empirical estimators constructed with suitably chosen sampling weights so that, when aggregated, they agree with the reliable direct estimator for the larger area. The fourth procedure produces benchmarked estimators that are the result of a minimization problem subject to the constraint given by the benchmark condition. These benchmark procedures are applied to the small area estimators when the sampling rates are non-negligible. The resulting benchmarked estimators are compared in terms of relative bias and mean squared error using both a design-based simulation study as well as an example with real survey data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100008
    Description:

    Changes in the design of a repeated survey generally result in systematic effects in the sample estimates, which are further referred to as discontinuities. To avoid confounding real period-to-period change with the effects of a redesign, discontinuities are often quantified by conducting the old and the new design in parallel for some period of time. Sample sizes of such parallel runs are generally too small to apply direct estimators for domain discontinuities. A bivariate hierarchical Bayesian Fay-Herriot (FH) model is proposed to obtain more precise predictions for domain discontinuities and is applied to a redesign of the Dutch Crime Victimization Survey. This method is compared with a univariate FH model where the direct estimates under the regular approach are used as covariates in a FH model for the alternative approach conducted on a reduced sample size and a univariate FH model where the direct estimates for the discontinuities are modeled directly. An adjusted step forward selection procedure is proposed that minimizes the WAIC until the reduction of the WAIC is smaller than the standard error of this criteria. With this approach more parsimonious models are selected, which prevents selecting complex models that tend to overfit the data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100009
    Description: Predictive mean matching is a commonly used imputation procedure for addressing the problem of item nonresponse in surveys. The customary approach relies upon the specification of a single outcome regression model. In this note, we propose a novel predictive mean matching procedure that allows the user to specify multiple outcome regression models. The resulting estimator is multiply robust in the sense that it remains consistent if one of the specified outcome regression models is correctly specified. The results from a simulation study suggest that the proposed method performs well in terms of bias and efficiency.
    Release date: 2021-06-24

  • Stats in brief: 45-28-0001202100100027
    Description:

    The COVID-19 pandemic has significantly impacted the behaviours of Canadians, particularly regarding their online activities. Using data from the 2020 Canadian Internet Use Survey, this article examines several Internet-related activities Canadians have done more often during the pandemic.

    Release date: 2021-06-24

  • Stats in brief: 11-627-M2021041
    Description:

    This infographic features the pathways of registered apprentices across Canada. It presents the certification, continuation and discontinuation rates of registered apprentices over time as well as key results among 25 selected Red Seal trades, and 5 selected non-Red Seal trades.

    Release date: 2021-06-24

  • Articles and reports: 36-28-0001202100600001
    Description:

    This article provides an integrated summary of key changes in economic and labour market activity since the onset of the pandemic.

    Release date: 2021-06-23

  • Articles and reports: 36-28-0001202100600002
    Description: International students are increasingly viewed as a promising pool of skilled individuals who can be tapped for participation in the Canadian labour market. This is a key motivating factor for providing international students with pathways to obtain permanent residency. This article documents the share of international students who became landed immigrants across various sociodemographic characteristics.
    Release date: 2021-06-23
Reference (2,038)

Reference (2,038) (720 to 730 of 2,038 results)

  • Surveys and statistical programs – Documentation: 62F0026M2005001
    Description:

    This paper provides some guidance to users on the use of medians and also gives some examples of situations when it can be a more appropriate measure than the average.

    Release date: 2005-05-17

  • Surveys and statistical programs – Documentation: 85-564-X
    Geography: Province or territory
    Description:

    This objective of this report is to present the status of national data on Aboriginal people who come into contact with the criminal justice system as offenders and victims. The report examines the current and potential collection of an individual's Aboriginal identity through various justice-related surveys at Statistics Canada, the challenges within these surveys to collect these data and provides some insight into the quality of these data. The data and sources are examined within the context of information needs for the justice and social policy sectors, and in relation to the preferred method of measuring Aboriginal Identity at Statistics Canada. Data sources examined include the Incident-based Uniform Crime Reporting Survey, the Homicide Survey, the Integrated Criminal Courts Survey, the Adult Corrections Survey, the Youth Custody and Community Services Survey, the Youth Alternative Measures Survey, the Transition Home Survey, the Victim Services Survey and the General Social Survey on Victimization. Finally, the report briefly describes efforts by other countries to improve justice-related information on their indigenous populations.

    Release date: 2005-05-10

  • Surveys and statistical programs – Documentation: 11F0026M2005004
    Description:

    A statistical agency faces several challenges in building Productivity Accounts. Measures of productivity require that outputs be compared to inputs.

    This paper discusses the challenges that a statistical agency faces in this area -as illustrated by the Canadian experience. First, it examines the progress that has been made in developing a system that integrates the Productivity Accounts into the overall System of National Accounts. It also discusses deficiencies that still need to be overcome. Finally, the paper focuses on the need to consider whether the SNA manual should be extended into the area of productivity measurement. The paper argues that the advantage of integrating productivity accounts into the general accounts is sufficiently great that it is time to include more detail on the nature of productivity accounts in the general SNA framework.

    Release date: 2005-04-28

  • Notices and consultations: 13-605-X20050018502
    Description:

    The National Accounts Advisory Committee reviews and gives advice on the concepts, methods, plans, standards as well as results associated with Statistics Canada's System of National Accounts.

    Release date: 2005-04-11

  • Notices and consultations: 10C0012
    Description:

    The resource centre provides consulting services to users of record linkage methods. Consultations may vary from recommendations of methodology to collaborative work on record linkage applications. Advice concerning record linkage software is also provided in collaboration with personnel of Systems Development Division. Areas of expertise include:

    - file preprocessing;

    - specification of comparison rules;

    - estimation of agreement probabilities; and

    - error rate estimation.

    Release date: 2005-04-01

  • Surveys and statistical programs – Documentation: 75F0002M2005002
    Description:

    This paper describes the changes made to the structure of geography information on SLID from reference year 1999 onwards. It goes into reasons for changing to the 2001 Census-based geography, shows how the overlap between the 1991 and 2001 Census-based concepts are handled, provides detail on how the geographic concepts are implemented, discusses a new imputation procedure and finishes with an illustration of the impact of these changes on selected tables.

    Release date: 2005-03-31

  • Surveys and statistical programs – Documentation: 89-552-M2005013
    Geography: Canada
    Description:

    This report documents key aspects of the development of the International Adult Literacy and Life Skills Survey (ALL) - its theoretical roots, the domains selected for possible assessment, the approaches taken to assessment in each domain and the criteria that were employed to decide which domains were to be carried in the final design. As conceived, the ALL survey was meant to build on the success of the International Adult Literacy Survey (IALS) assessments by extending the range of skills assessed and by improving the quality of the assessment methods employed. This report documents several successes including: · the development of a new framework and associated robust measures for problem solving · the development of a powerful numeracy framework and associated robust measures · the specification of frameworks for practical cognition, teamwork and information and communication technology literacy The report also provides insight into those domains where development failed to yield approaches to assessment of sufficient quality, insight that reminds us that scientific advance in this domain is hard won.

    Release date: 2005-03-24

  • Surveys and statistical programs – Documentation: 96-328-M
    Geography: Canada
    Description:

    This teacher's kit focuses on secondary school subject areas: family studies/home economics; geography; history; and science. The lessons are connected to curricula across Canada.

    The publication contains short analytical articles and full-colour maps, photographs, charts and graphs on different aspects of Canada's agriculture industry. Written in plain language for students, the book uses Census of Agriculture and other data.

    Release date: 2005-03-18

  • Surveys and statistical programs – Documentation: 96-328-M2004030
    Geography: Canada
    Description:

    This activity looks at the increase in greenhouse area in Canada, and how this industry is changing.

    Release date: 2005-03-18

  • Surveys and statistical programs – Documentation: 96-328-M2004031
    Description:

    This activity looks at how greenhouses in the North are changing the ways in which people in more remote regions of the country have access to fresh produce for a longer part of the year.

    Release date: 2005-03-18