Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (9,840 to 9,850 of 10,894 results)

  • Articles and reports: 12-001-X19980024348
    Description:

    Gross flows among labour force states are of great importance in understanding labour market dynamics. Observed flows are typically subject to classification errors, which may induce serious bias. In this paper, some of the most common strategies, used to collect longitudinal information about labour force condition are reviewed, jointly with the modelling approaches developed to correct gross flows, when affected by classification errors. A general framework for estimating gross flows is outlined. Examples are given of different model specifications, applied to data collected with different strategies. Specifically, two cases are considered, i.e., gross flows from (i) the U.S. Survey of Income and Program Participation and (ii) the French Labour Force Survey, a yearly survey collecting retrospective monthly information.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024349
    Description:

    Measurement of gross flows in labour force status is an important objective of the continuing labour force surveys carried out by many national statistics agencies. However, it is well known that estimation of these flows can be complicated by nonresponse, measurement errors, sample rotation and complex design effects. Motivated by nonresponse patterns in household-based surveys, this paper focuses on estimation of labour force gross flows, while simultaneously adjusting for nonignorable nonresponse. Previous model-based approaches to gross flows estimation have assumed nonresponse to be an individual-level process. We propose a class of models that allow for nonignorable household-level nonresponse. A simulation study is used to show, that individual-level labour force gross flows estimates from household-based survey data, may be biased and that estimates using household-level models can offer a reduction in this bias.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024350
    Description:

    In longitudinal surveys, simple estimates of change, such as differences of percentages may not always be efficient enough to detect changes of practical relevance, especially in sub-populations. The use of models, which can represent the dependence structure of the longitudinal survey, can help to solve this problem. One of the main characteristics observed by the Swiss Labour Force Survey (SLFS) is the employment status. As the survey is designed as a rotating panel, the data from the SLFS are multivariate categorical data, where a large proportion of the response profiles are missing by design. The multivariate logistic model, introduced by Glonek and McCullagh (1995) as a generalisation of logistic regression, is attractive in this context, since it allows for dependent repeated observations and incomplete response profiles. We show that, using multivariate logistic regression, we can represent the complex dependence structure of the SLFS by a small number of parameters, and obtain more efficient estimates of change.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024351
    Description:

    To calculate price indexes, data on "the same item" (actually a collection of items narrowly defined) must be collected across time periods. The question arises whether such "quasi-longitudinal" data can be modeled in such a way as to shed light on what a price index is. Leading thinkers on price indexes have questioned the feasibility of using statistical modeling at all for characterizing price indexes. This paper suggests a simple state space model of price data, yielding a consumer price index that is given in terms of the parameters of the model.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024352
    Description:

    The National Population Health Survey (NPHS) is one of Statistics Canada's three major longitudinal household surveys providing an extensive coverage of the Canadian population. A panel of approximately 17,000 people are being followed up every two years for up to twenty years. The survey data are used for longitudinal analyses, although an important objective is the production of cross-sectional estimates. Each cycle panel respondents provide detailed health information (H) while, to augment the cross-sectional sample, general socio-demographic and health information (G) are collected from all members of their households. This particular collection strategy presents several observable response patterns for Panel Members after two cycles: GH-GH, GH-G*, GH-**, G*-GH, G*-G* and G*-**, where "*" denotes a missing portion of data. The article presents the methodology developed to deal with these types of longitudinal nonresponse as well as with nonresponse from a cross-sectional perspective. The use of weight adjustments for nonresponse and the creation of adjustment cells for weighting using a CHAID algorithm are discussed.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024353
    Description:

    This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024354
    Description:

    This article deals with an attempt to cross-tabulate two categorical variables, which were separately collected from two large independent samples, and jointly collected from one small sample. It was assumed that the large samples have a large set of common variables. The proposed estimation technique can be considered a mix between calibration techniques and statistical matching. Through calibration techniques, it is possible to incorporate the complex designs of the samples in the estimation procedure, to fulfill some consistency requirements between estimates from various sources, and to obtain fairly unbiased estimates for the two-way table. Through the statistical matching techniques, it is possible to incorporate a relatively large set of common variables in the calibration estimation, by means of which the precision of the estimated two-way table can be improved. The estimation technique enables us to gain insight into the bias generally obtained, in estimating the two-way table, by sole use of the large samples. It is shown how the estimation technique can be useful to impute values of the one large sample (donor source) into the other large sample (host source). Although the technique is principally developed for catagorical variables Y and Z, with a minor modification, it is also applicable for continuous variables Y and Z.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024355
    Description:

    Two sampling strategies have been proposed for estimating the finite population total for the most recent occasion, based on the samples selected over two occasions involving varying probability sampling schemes. Attempts have been made to utilize the data collected on a study variable, in the first occasion, as a measure of size and a stratification variable for selection of the matched-sample on the second occasion. Relative efficiencies of the proposed strategies have been compared with suitable alternatives.

    Release date: 1999-01-14

  • Articles and reports: 12-001-X19980024356
    Description:

    In the nonsurvey setting,"exact" confidence intervals for proportions calculated using the binomial distribution are frequently used instead of intervals based on approximate normality when the number of positive counts is small. With complex survey data, the binomial intervals are not applicable, so intervals based on the assumed approximate normality of the sample-weighted proportion are used, even if the number of positive counts is small. We propose a simple modification of the binomial intervals to be used in this situation. Limited simulations are presented that show the coverage probability of the proposed intervals is superior to that of the normality-based intervals, logit-transform intervals, and intervals based on a Poisson approximation. Applications are given involving the prevalence of Human Immunodeficiency Virus (HIV) based on data from the third National Health and Nutrition Examination Survey, and the proportion of users of cocaine based on data from the Hispanic Health and Nutrition Examination Survey.

    Release date: 1999-01-14

  • 9,850. Childhood asthma Archived
    Articles and reports: 82-003-X19980034137
    Geography: Canada
    Description:

    This article describes trends in the prevalence of asthma among children aged 0 to 14 from 1978/79 to 1994/95, and in hospital separations for asthma from 1974/75 to 1994/95. It also examines factors associated with childhood asthma.

    Release date: 1999-01-12
Reference (2,038)

Reference (2,038) (660 to 670 of 2,038 results)

  • Geographic files and documentation: 92-155-G
    Description:

    This guide describes the content and applications of the product, as well as providing information on data quality, record layouts, and methodology.

    Release date: 2007-03-13

  • Geographic files and documentation: 92-155-X
    Description:

    The Road Network and Geographic Attribute File is a digital representation of Canada's national road network, containing information such as street name, type, direction, address range and road rank. Address ranges are largely dwelling-based and occur mainly in urban centres of Canada. Also included on each side of every road arc are identification names and codes for the following levels of geography:

    - province/territory- census subdivision- census metropolitan area- census agglomeration- census tract

    Roads are ranked according to four levels of detail, suitable for mapping at small to medium scales. The Road Network and Geographic Attribute File provides cartographic reference features in the production of thematic maps using the 2006 Census Boundary Files. The positional accuracy of the Road Network and Geographic Attribute File does not support cadastral, surveying, digitizing or engineering applications.

    The Road Network and Geographic Attribute File is in latitude/longitude coordinates based upon the North American Datum of 1983 (NAD83). A reference guide is available (92-155-GIE).

    Release date: 2007-03-13

  • Geographic files and documentation: 92-164-X
    Description: The Urban Area Boundary Files portray the urban area boundaries for which 2006 Census data are disseminated. An urban area has a minimum population concentration of 1,000 persons and a population density of at least 400 persons per square kilometre, based on the current census population count. The files contain the boundaries of all 895 urban areas defined for the 2006 Census.

    There are two types of boundary files: digital and cartographic. Digital files depict the full extent of the geographical areas, including the coastal water area. Cartographic files depict the geographical areas using only the major land mass of Canada and its coastal islands. The files provide a framework for mapping and spatial analysis using commercially available geographic information systems (GIS) or other mapping software. They are positionally consistent with the 2006 Road Network File, which can provide additional geographic context for mapping applications.

    The Urban Area Boundary Files are in latitude/longitude coordinates and are based on the North American Datum of 1983 (NAD83). A reference guide is available (92-160-GWE).

    Release date: 2007-03-13

  • Surveys and statistical programs – Documentation: 11-522-X20050019476
    Description:

    The paper will show how, using data published by Statistics Canada and available from member libraries of the CREPUQ, a linkage approach using postal codes makes it possible to link the data from the outcomes file to a set of contextual variables. These variables could then contribute to producing, on an exploratory basis, a better index to explain the varied outcomes of students from schools. In terms of the impact, the proposed index could show more effectively the limitations of ranking students and schools when this information is not given sufficient weight.

    Release date: 2007-03-02

  • Surveys and statistical programs – Documentation: 92-566-X
    Description:

    The 2006 Census Dictionary provides detailed information on every aspect of the Census of Population and Census of Agriculture along with an overview of each phase of the census, from content determination to data dissemination with focus on the changes from 2001. As well, it provides detailed definitions of the Census of Population concepts, universes, variables and geographic terms, including historical information to facilitate the comparison of variables between census years.

    New this year in the Internet version is a phased release approach. The continued effort to include supplemental plain language definitions for certain variables, without census or Statistics Canada jargon, will help users better understand the meaning of the definitions and the periodic updates.

    Release date: 2007-02-14

  • Surveys and statistical programs – Documentation: 15-206-X2007005
    Description: This paper generates depreciation profiles for a diverse set of assets based on patterns of resale prices and retirements. In doing so, it explores the sensitivity of estimates of the growth in capital stock and capital services to alternate estimates of depreciation.

    In the first instance, survival analysis techniques are used to estimate changes in valuation of assets over the course of their service life. In the second instance, a two-step procedure is utilized that first estimates the discard function for used assets (assets discarded at zero prices) and then uses the resulting estimates to correct for selection bias that arises when just positive used-asset prices are employed to estimate age-price profiles to produce depreciation rates. For the third method, a discard function and an asset efficiency function are jointly specified and estimated.

    These three different methods produce depreciation profiles that follow convex patterns. Accelerated profiles are apparent for many individual assets in the machinery and equipment and structures classes.

    We also compare the ex post estimates of length of life that are based on outcomes to ex ante expected lives and find they are much the same. We therefore choose ex ante lives along with information from the ex post rates on the rate of decline in an asset's value to generate a set of depreciation rates for use in the productivity accounts.

    We then use our depreciation model to produce estimates of the growth in capital stock and capital services over the 1961 to 1996 period. We find that the resulting estimates of capital stock and capital services are quite similar to those previously produced.

    Release date: 2007-02-12

  • Geographic files and documentation: 92F0153G
    Description:

    The Postal Code Conversion File (PCCF) Reference Guide is available for the following product: Postal Code Conversion File (PCCF) (Catalogue No. 92F0153XCE). The Reference Guide describes how to use the product.

    Release date: 2007-01-30

  • Geographic files and documentation: 92-148-X2006001
    Description:

    The Dissemination Area Reference Maps, by Non-tracted Census Agglomerations cover smaller census agglomerations that are not part of the census tract program. Each map in the series covers one census agglomeration and displays the boundaries and codes of dissemination areas, designated places and their names, urban core, urban fringe and rural fringe, within that census agglomeration. There are 271 maps in this series and inset maps were created to show detail for the more concentrated areas. The maps also display census subdivision boundaries with detailed street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size, the maximum dimensions being 86 cm by 61 cm (34 inches by 24 inches). Dissemination area reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB) and by census subdivisions for areas outside census metropolitan areas and census agglomerations (92-145-UIB). Together, the three sets of dissemination area maps cover all of Canada. A reference guide is available (Catalogue No. 92-145-GIE). Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-01-16

  • Geographic files and documentation: 92-145-X2006001
    Description:

    The Dissemination Area Reference Maps, by Census Subdivisions, for areas outside Census Metropolitan Areas and Census Agglomerations cover areas outside census metropolitan areas and census agglomerations. Each map in this series covers one census subdivision and displays the boundaries and codes of dissemination areas, designated places and their names, as well as urban and rural areas within that census subdivision. There are 4,470 maps in this series. The maps also display census subdivision boundaries with detailed street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size; the maximum dimensions are 86 cm by 61 cm (34 inches by 24 inches). Dissemination areas reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB), and by non-tracted census agglomerations (92-148-UIB). Together, the three sets of dissemination area maps cover all of Canada. A reference guide is available (92-145-GIE). Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-01-16

  • Geographic files and documentation: 92-145-G
    Description: The Reference Guide describes the content and general methodology, as well as data quality, and other information for all three sets of Dissemination Area Reference Map series.

    The Dissemination Area Reference Maps, Reference Guide is available and includes the following 2006 products: - Dissemination Area Reference Maps, by Census Tracts, for Census Metropolitan Areas and Census Agglomerations (92-147-XIB) - Dissemination Area Reference Maps, by Non-tracted Census Agglomerations (92-148-UIB) - Dissemination Area Reference Maps, by Census Subdivisions, for areas outside Census Metropolitan Areas and Census Agglomerations (92-145-UIB).

    Release date: 2007-01-16