Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,450 to 3,460 of 10,894 results)

  • Articles and reports: 99-011-X2019001
    Description: The article presents suicide rates for the 2011-2016 time period among self-identifying First Nations, Métis, Inuit, and non-Indigenous people in private dwellings in Canada. It also explores the influence of socioeconomic factors in the disparity in risk of suicide between First Nations people, Métis, Inuit and non-Indigenous people in Canada. It uses the 2011 Canadian Census Health and Environment Cohort (CanCHEC), resulting from a record integration between the 2011 National Household Survey (NHS) and the Canadian Vital Statistics Database (CVSD).
    Release date: 2019-06-28

  • Stats in brief: 11-001-X201917920478
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2019-06-28

  • Stats in brief: 11-001-X201917921343
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2019-06-28

  • Articles and reports: 12-001-X201900200001
    Description:

    Development of imputation procedures appropriate for data with extreme values or nonlinear relationships to covariates is a significant challenge in large scale surveys. We develop an imputation procedure for complex surveys based on semiparametric quantile regression. We apply the method to the Conservation Effects Assessment Project (CEAP), a large-scale survey that collects data used in quantifying soil loss from crop fields. In the imputation procedure, we first generate imputed values from a semiparametric model for the quantiles of the conditional distribution of the response given a covariate. Then, we estimate the parameters of interest using the generalized method of moments (GMM). We derive the asymptotic distribution of the GMM estimators for a general class of complex survey designs. In simulations meant to represent the CEAP data, we evaluate variance estimators based on the asymptotic distribution and compare the semiparametric quantile regression imputation (QRI) method to fully parametric and nonparametric alternatives. The QRI procedure is more efficient than nonparametric and fully parametric alternatives, and empirical coverages of confidence intervals are within 1% of the nominal 95% level. An application to estimation of mean erosion indicates that QRI may be a viable option for CEAP.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200002
    Description:

    The National Agricultural Statistics Service (NASS) of the United States Department of Agriculture (USDA) is responsible for estimating average cash rental rates at the county level. A cash rental rate refers to the market value of land rented on a per acre basis for cash only. Estimates of cash rental rates are useful to farmers, economists, and policy makers. NASS collects data on cash rental rates using a Cash Rent Survey. Because realized sample sizes at the county level are often too small to support reliable direct estimators, predictors based on mixed models are investigated. We specify a bivariate model to obtain predictors of 2010 cash rental rates for non-irrigated cropland using data from the 2009 Cash Rent Survey and auxiliary variables from external sources such as the 2007 Census of Agriculture. We use Bayesian methods for inference and present results for Iowa, Kansas, and Texas. Incorporating the 2009 survey data through a bivariate model leads to predictors with smaller mean squared errors than predictors based on a univariate model.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200003
    Description:

    Merging available sources of information is becoming increasingly important for improving estimates of population characteristics in a variety of fields. In presence of several independent probability samples from a finite population we investigate options for a combined estimator of the population total, based on either a linear combination of the separate estimators or on the combined sample approach. A linear combination estimator based on estimated variances can be biased as the separate estimators of the population total can be highly correlated to their respective variance estimators. We illustrate the possibility to use the combined sample to estimate the variances of the separate estimators, which results in general pooled variance estimators. These pooled variance estimators use all available information and have potential to significantly reduce bias of a linear combination of separate estimators.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200004
    Description:

    Benchmarking lower level estimates to upper level estimates is an important activity at the United States Department of Agriculture’s National Agricultural Statistical Service (NASS) (e.g., benchmarking county estimates to state estimates for corn acreage). Assuming that a county is a small area, we use the original Fay-Herriot model to obtain a general Bayesian method to benchmark county estimates to the state estimate (the target). Here the target is assumed known, and the county estimates are obtained subject to the constraint that these estimates must sum to the target. This is an external benchmarking; it is important for official statistics, not just NASS, and it occurs more generally in small area estimation. One can benchmark these estimates by “deleting” one of the counties (typically the last one) to incorporate the benchmarking constraint into the model. However, it is also true that the estimates may change depending on which county is deleted when the constraint is included in the model. Our current contribution is to give each small area a chance to be deleted, and we call this procedure the random deletion benchmarking method. We show empirically that there are differences in the estimates as to which county is deleted and that there are differences of these estimates from those obtained from random deletion as well. Although these differences may be considered small, it is most sensible to use random deletion because it does not give preferential treatment to any county and it can provide small improvement in precision over deleting the last one benchmarking as well.

    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200005
    Description: We present an approach for imputation of missing items in multivariate categorical data nested within households. The approach relies on a latent class model that (i) allows for household-level and individual-level variables, (ii) ensures that impossible household configurations have zero probability in the model, and (iii) can preserve multivariate distributions both within households and across households. We present a Gibbs sampler for estimating the model and generating imputations. We also describe strategies for improving the computational efficiency of the model estimation. We illustrate the performance of the approach with data that mimic the variables collected in typical population censuses.
    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200006
    Description: This paper presents a new algorithm to solve the one-dimensional optimal stratification problem, which reduces to just determining stratum boundaries. When the number of strata H and the total sample size n are fixed, the stratum boundaries are obtained by minimizing the variance of the estimator of a total for the stratification variable. This algorithm uses the Biased Random Key Genetic Algorithm (BRKGA) metaheuristic to search for the optimal solution. This metaheuristic has been shown to produce good quality solutions for many optimization problems in modest computing times. The algorithm is implemented in the R package stratbr available from CRAN (de Moura Brito, do Nascimento Silva and da Veiga, 2017a). Numerical results are provided for a set of 27 populations, enabling comparison of the new algorithm with some competing approaches available in the literature. The algorithm outperforms simpler approximation-based approaches as well as a couple of other optimization-based approaches. It also matches the performance of the best available optimization-based approach due to Kozak (2004). Its main advantage over Kozak’s approach is the coupling of the optimal stratification with the optimal allocation proposed by de Moura Brito, do Nascimento Silva, Silva Semaan and Maculan (2015), thus ensuring that if the stratification bounds obtained achieve the global optimal, then the overall solution will be the global optimum for the stratification bounds and sample allocation.
    Release date: 2019-06-27

  • Articles and reports: 12-001-X201900200007
    Description:

    When fitting an ordered categorical variable with L > 2 levels to a set of covariates onto complex survey data, it is common to assume that the elements of the population fit a simple cumulative logistic regression model (proportional-odds logistic-regression model). This means the probability that the categorical variable is at or below some level is a binary logistic function of the model covariates. Moreover, except for the intercept, the values of the logistic-regression parameters are the same at each level. The conventional “design-based” method used for fitting the proportional-odds model is based on pseudo-maximum likelihood. We compare estimates computed using pseudo-maximum likelihood with those computed by assuming an alternative design-sensitive robust model-based framework. We show with a simple numerical example how estimates using the two approaches can differ. The alternative approach is easily extended to fit a general cumulative logistic model, in which the parallel-lines assumption can fail. A test of that assumption easily follows.

    Release date: 2019-06-27
Reference (2,038)

Reference (2,038) (580 to 590 of 2,038 results)

  • Notices and consultations: 92-138-X
    Description:

    With each census, Statistics Canada improves its methods of dissemination to the public by seeking ways of publishing census results in a timely and accessible manner, while maintaining high data quality standards.

    This consultation guide has been developed to assist you in providing feedback on 2006 Census products and services and in contributing ideas and suggestions to the 2011 Census dissemination strategy.

    Release date: 2008-11-05

  • Surveys and statistical programs – Documentation: 75F0002M199201A
    Description: Starting in 1994, the Survey of Labour and Income Dynamics (SLID) will follow individuals and families for at least six years, tracking their labour market experiences, changes in income and family circumstances. An initial proposal for the content of SLID, entitled Content of the Survey of Labour and Income Dynamics : Discussion Paper, was distributed in February 1992.

    That paper served as a background document for consultation wit h interested users. The content underwent significant change during this process. Based upon the revised content, a large-scale test of SLID will be conducted in February and May 1993.

    This document outlines the current demographic and labour content, leading into the test.

    Release date: 2008-10-21

  • Surveys and statistical programs – Documentation: 12-589-X
    Description:

    This free publication presents the concepts and criteria utilized to determine the entities that comprise the public sector of Canada.

    The resulting statistical universe provides the framework to observe the extent of governments' involvement in the production of goods and services and the associated resource allocation process in the Canadian economy.

    The concepts and criteria contained in the guide are consistent with two internationally accepted classification standards: the System of National Accounts (SNA 2008) guide; and the International Monetary Fund (IMF) Government Finance Statistics Manual 2001.

    As well, the guide delineates the various public sector components that are used in compiling and aggregating public sector data. This structure also enables comparisons of Canadian government finance data with international macroeconomic statistical systems.

    Release date: 2008-09-26

  • Surveys and statistical programs – Documentation: 82-582-X
    Description:

    This special methodological paper will help readers understand and assess reports that rank the health status or health system performance of a country, province or jurisdiction. The report outlines the components and processes that underlie health rankings, explores why such rankings can be difficult to interpret and includes a plain-language checklist to use as a critical evaluative resource when reading health-ranking reports.

    Release date: 2008-09-16

  • Surveys and statistical programs – Documentation: 75-512-X
    Description:

    This book provides technical documentation of variables, methodologies and extended lists of references used in developing the research findings reported in "New Frontiers of Research on Retirement". It will be used around the world by researchers and teachers, as well as by students preparing theses related to patterns of transition to retirement. This documentation is important because a large part of book is devoted to scientific papers that are based upon Statistics Canada's data and which require substantial innovations of useful concepts and data.

    Release date: 2008-09-08

  • Surveys and statistical programs – Documentation: 75F0002M2008005
    Description: The Survey of Labour and Income Dynamics (SLID) is a longitudinal survey initiated in 1993. The survey was designed to measure changes in the economic well-being of Canadians as well as the factors affecting these changes. Sample surveys are subject to sampling errors. In order to consider these errors, each estimates presented in the "Income Trends in Canada" series comes with a quality indicator based on the coefficient of variation. However, other factors must also be considered to make sure data are properly used. Statistics Canada puts considerable time and effort to control errors at every stage of the survey and to maximise the fitness for use. Nevertheless, the survey design and the data processing could restrict the fitness for use. It is the policy at Statistics Canada to furnish users with measures of data quality so that the user is able to interpret the data properly. This report summarizes the set of quality measures of SLID data. Among the measures included in the report are sample composition and attrition rates, sampling errors, coverage errors in the form of slippage rates, response rates, tax permission and tax linkage rates, and imputation rates.
    Release date: 2008-08-20

  • Surveys and statistical programs – Documentation: 97-560-G
    Description: This guide focuses on the following demographic variable: Education.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts and data quality. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-08-05

  • Surveys and statistical programs – Documentation: 97-560-G2006003
    Description:

    This guide focuses on the following demographic variable: Education.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts and data quality. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-08-05

  • Surveys and statistical programs – Documentation: 97-557-G
    Description: These guides provide information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.
    Release date: 2008-07-29

  • Surveys and statistical programs – Documentation: 97-562-G
    Description: This guide focuses on the following demographic variables: Visible minority population and Population group.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-07-29