Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (80 to 90 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (460 to 470 of 2,038 results)

  • Notices and consultations: 13-605-X201400314106
    Description:

    The methodology for estimating the Flows and Stocks of Fixed Capital has been redeveloped to ensure greater coherence of the capital stock program within the Canadian System of Macroeconomic Accounts (CSMA). This is done by incorporating investment flows directly from the CSMA on a detailed industry/asset basis. The data released will be based on the input-output final demand classification, with updated per asset depreciation profiles and prices.

    Release date: 2014-10-17

  • Surveys and statistical programs – Documentation: 13-605-X201400214100
    Description:

    Canadian international merchandise trade data are released monthly and may be revised in subsequent releases as new information becomes available. These data are released approximately 35 days following the close of the reference period and represent one of the timeliest economic indicators produced by Statistics Canada. Given their timeliness, some of the data are not received in time and need to be estimated or modelled. This is the case for imports and exports of crude petroleum and natural gas. More specifically, at the time of release, energy trade data are based on an incomplete set of information and are revised as Statistics Canada and National Energy Board information becomes available in the subsequent months. Due to the increasing importance of energy imports and exports and the timeliness of the data, the revisions to energy prices and volumes are having an increasingly significant impact on the monthly revision to Canada’s trade balance. This note explains how the estimates in the initial release are made when data sources are not yet available, and how the original data are adjusted in subsequent releases.

    Release date: 2014-10-03

  • Surveys and statistical programs – Documentation: 16-507-X2014001
    Description:

    These educational resources provide instructors with innovative materials, lesson plans and case study assignments to accompany the 2013 release of the Human Activity and the Environment article, “Measuring ecosystem goods and services in Canada.” The materials and activities were developed by the Critical Thinking Consortium, a non-profit, registered association of 55 educational partners—school districts, schools, teacher associations and other educational organizations.

    Resources were developed for a junior high school, senior high school and introductory post-secondary audience. Curriculum links include grades 7 to 12 geography, social studies, biology, science and economics, as well as introductory post-secondary geography and environmental science.

    Release date: 2014-09-24

  • Geographic files and documentation: 92F0138M2014001
    Description:

    The Postal CodesOM by Federal Ridings File, Special Issue (PCFRF Special Issue) refers to the federal electoral districts (FEDs) based on the 2013 Representation Order. The PCFRF Special Issue is a digital file which provides a link between the six-character postal codeOM and Canada's federal electoral districts (which are also known as federal ridings). This special version of the PCFRF links 848,257 active postal codeOM records, existing as of June 2013, to the 338 federal electoral districts of the 2013 Representation Order. These new federal electoral districts will be applied in the first general election called after May 1, 2014.

    The PCFRF Special Issue was created by converting the existing federal electoral districts (2003 Representation Order) and their linked postal codes to the new federal electoral districts (2013 Representation Order), transferring the postal codeOM linkages. The conversion process was accomplished using 2011 Census Dissemination Blocks and a best fit methodology for dissemination blocks that were found in more than one federal electoral district.

    Release date: 2014-08-26

  • Surveys and statistical programs – Documentation: 99-011-X2011002
    Description:

    The 2011 NHS Aboriginal Peoples Technical Report deals with: (1) Aboriginal ancestry, (2) Aboriginal identity, (3) Registered Indian status and (4) First Nation/Indian band membership.

    The report contains explanations of concepts, data quality, historical comparability and comparability to other sources, as well as information on data collection, processing and dissemination.

    Release date: 2014-05-28

  • Surveys and statistical programs – Documentation: 16-257-X
    Description:

    Environment Accounts and Statistics Division is Statistics Canada's focal point for the collection, analysis and dissemination of environmental information. This reference guide briefly describes the division's programs, as well as all publications and electronic products offered on a quarterly, annual, biennial and occasional basis.

    Release date: 2014-04-17

  • Surveys and statistical programs – Documentation: 13-605-X201400111911
    Description:

    Statistical revisions are carried out regularly in the Canadian System of National Accounts (CSNA) in order to incorporate the most current information from censuses, annual surveys, administrative statistics, public accounts, etc., and to implement improved estimation methods.

    Release date: 2014-02-28

  • Notices and consultations: 13-605-X201400111912
    Description:

    Statistical revisions are regularly applied to the Canadian System of Macroeconomic Accounts in order to incorporate the most current information from censuses, annual surveys, administrative statistics, public accounts, etc., and to implement improved estimation methods. Statistics Canada also conducts more comprehensive revisions to the Canadian System of Macroeconomic Accounts, which generally reflect new concepts, accounting treatments or methods.

    Release date: 2014-02-28

  • Surveys and statistical programs – Documentation: 89-653-X2013002
    Description:

    The Aboriginal Peoples Survey (APS) is a national survey on the social and economic conditions of First Nations people living off reserve, Métis and Inuit aged 6 years and over. The 2012 APS represents the fourth cycle of the survey and focuses on issues of education, employment and health.

    The 2012 APS Concepts and Methods Guide is designed to assist data users by providing relevant information on survey content and concepts, sampling design, collection methods, data processing, data quality and product availability. Chapter 1 introduces the survey's background and objectives; Chapter 2 gives important definitions and describes the survey's themes; Chapters 3 through 5 explain the APS design and outline the data collection and processing steps; Chapter 6 describes the weighting method used; Chapters 7 and 8 review data quality and address comparability of the 2012 APS data with data from other sources; Chapter 9 lists survey products including analytical articles, data tables and reference material; Appendices provide additional definitions and links to other relevant documentation.

    Release date: 2014-02-20

  • Surveys and statistical programs – Documentation: 89-654-X2014001
    Description:

    The Canadian Survey on Disability (CSD) is a national survey of Canadians aged 15 and over whose everyday activities are limited because of a long-term condition or health-related problem.

    The 2012 CSD Concepts and Methods Guide is designed to assist data users by providing relevant information on survey content and concepts, sampling design, collection methods, data processing, data quality and product availability. Chapter 1 of this guide provides an overview of the 2012 CSD by introducing the survey's background and objectives. Chapter 2 explains the key concepts and definitions and introduces the indicators measured by the CSD questionnaire modules. Chapters 3 to 6 cover important aspects of survey methodology, from sampling design to data collection and processing. Chapters 7 and 8 cover issues of data quality, including the approaches used to minimize and correct errors throughout all stages of the survey. Users are cautioned against making comparisons with data from previous Participation and Activity Limitations Surveys. Chapter 9 outlines the survey products that are available to the public, including data tables, a fact sheet and reference material. Appendices provide more detail on survey indicators as well as a glossary of terms.

    Release date: 2014-02-05