Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,650 to 10,660 of 10,894 results)

  • Articles and reports: 75-001-X19900012294
    Geography: Canada
    Description:

    As more and more wives join the work force, the dual-earner family has become the norm and a wife who earns more than her husband is no longer a rarity: in 1987, it happened in just under one of five dual-earner families. This study profiles these wives and their husbands by work patterns and earnings, and looks at life-cycle variations.

    Release date: 1990-01-26

  • Articles and reports: 75-001-X19900012295
    Geography: Canada
    Description:

    Calculating an unemployment rate based on unutilized hours offers a more complete measure of unemployment. It also results in a higher rate of unemployment. This study provides a look at what else this measure can tell us.

    Release date: 1990-01-26

  • 10,653. Working for minimum wage Archived
    Articles and reports: 75-001-X19890042284
    Geography: Canada
    Description:

    One in twelve paid workers in 1986 earned the minimum wage or less. A portrait of low-wage earners and a brief look at the origins of minimum wage legislation and differences by jurisdiction.

    Release date: 1989-12-20

  • 10,654. Moonlighters Archived
    Articles and reports: 75-001-X19890042285
    Geography: Canada
    Description:

    In the average week of 1988, over a half a million people worked at two or more jobs. This study shows that some groups of workers - the young, the self-employed - are especially disposed to moonlighting. Family circumstances, hours of work and earnings between single and multiple jobholders are examined.

    Release date: 1989-12-20

  • 10,655. Disabled workers Archived
    Articles and reports: 75-001-X19890042286
    Geography: Canada
    Description: There were nearly 400,000 disabled workers in Canada in 1986 - less than a third of working age Canadians with a disability. What are the characteristics of disabled workers? This study compares disabled workers with the non-disabled in the work force and with disabled persons outside of the work force.
    Release date: 1989-12-20

  • Articles and reports: 75-001-X19890042287
    Geography: Canada
    Description:

    Immigrant workers are over-represented in "product fabricating" occupations, which include, for example, garment workers and mechanics. This profile of immigrants in fabricating jobs looks at age, education, period of immigration and knowledge of English or French. It also compared the employment income of immigrant and non-immigrant workers in product fabricating occupations.

    Release date: 1989-12-20

  • Articles and reports: 75-001-X19890042288
    Geography: Canada
    Description:

    Unemployment estimates from the Labour Force Survey, source of the official unemployment rate, are quite different from counts of the number of Unemployment Insurance beneficiaries. This piece reviews the conceptual differences between the two data sources and quantifies many of the factors that create the discrepancies.

    Release date: 1989-12-20

  • Articles and reports: 12-001-X198900214562
    Description:

    This paper presents a technique for developing appropriate confidence intervals around postcensal population estimates using a modification of the ratio-correlation method termed the rank-order procedure. It is shown that the Wilcoxon test can be used to decide if a given ratio-correlation model is stable over time. If stability is indicated, then the confidence intervals associated with the data used in model construction are appropriate for postcensal estimates. If stability is not indicated, the confidence intervals associated with the data used in model construction are not appropriate, and, moreover, likely to overstate the precision of postcensal estimates. Given instability, it is shown that confidence intervals appropriate for postcensal estimates can be derived using the rank-order procedure. An empirical example is provided using county population estimates for Washington state.

    Release date: 1989-12-15

  • Articles and reports: 12-001-X198900214563
    Description:

    This paper examines the adequacy of estimates of emigrants from Canada and interprovincial migration data from the Family Allowance files and Revenue Canada tax files. The application of these data files in estimating total population for Canada, provinces and territories, was evaluated with reference to the 1986 Census counts. It was found that these two administrative files provided consistent and reasonably accurate series of data on emigration and interprovincial migration from 1981 to 1986. Consequently, the population estimates were fairly accurate. The estimate of emigrants derived from the Family Allowance file could be improved by using the ratio of adult to child emigrant rates computed from Employment and Immigration Canada’s immigration file.

    Release date: 1989-12-15

  • Articles and reports: 12-001-X198900214564
    Description:

    It is sometimes required that a probabilities proportional to size without replacement (PPSWOR) sample of first stage units (psu’s) in a multistage population survey design be updated to take account of new size measures that have become available for the whole population of such units. However, because of a considerable investment in within-psu mapping, segmentation, listing, enumerator recruitment, etc., we would like to retain the same sample psu’s if possible, consistent with the requirement that selection probabilities may now be regarded as being proportional to the new size measures. The method described in this article differs from methods already described in the literature in that it is valid for any sample size and does not require enumeration of all possible samples. Further, it does not require that the old and the new sampling methods be the same and hence it provides a convenient way not only of updating size measures but also of switching to a new sampling method.

    Release date: 1989-12-15
Reference (2,038)

Reference (2,038) (450 to 460 of 2,038 results)

  • Notices and consultations: 11-017-X
    Description: Statistics Canada's Newsletter for Small and Medium-sized Businesses offers information to the business community about Statistics Canada's data and services. The newsletter also offers links to data releases of the Census and National Household Survey, videos, tutorials, media advisories, learning sessions and presentations.
    Release date: 2014-11-20

  • Surveys and statistical programs – Documentation: 13-605-X201400514088
    Description:

    An overview of the Canadian Government Finance Statistics (CGFS) framework; how it relates to other government statistics such as the Canadian System of Macroeconomic Accounts and the Public Accounts; and the new GFS data products available to users

    Release date: 2014-11-07

  • Notices and consultations: 13-605-X201400414107
    Description:

    Beginning in November 2014, International Trade in goods data will be provided on a Balance of Payments (BOP) basis for additional country detail. In publishing this data, BOP-based exports to and imports from 27 countries, referred to as Canada’s Principal Trading Partners (PTPs), will be highlighted for the first time. BOP-based trade in goods data will be available for countries such as China and Mexico, Brazil and India, South Korea, and our largest European Union trading partners, in response to substantial demand for information on these countries in recent years. Until now, Canada’s geographical trading patterns have been examined almost exclusively through analysis of Customs-based trade data. Moreover, BOP trade in goods data for these countries will be available alongside the now quarterly Trade in Services data as well as annual Foreign Direct Investment data for many of these Principal Trading Partners, facilitating country-level international trade and investment analysis using fully comparable data. The objective of this article is to introduce these new measures. This note will first walk users through the key BOP concepts, most importantly the concept of change in ownership. This will serve to familiarize analysts with the Balance of Payments framework for analyzing country-level data, in contrast to Customs-based trade data. Second, some preliminary analysis will be reviewed to illustrate the concepts, with provisional estimates for BOP-based trade with China serving as the principal example. Lastly, we will outline the expansion of quarterly trade in services to generate new estimates of trade for the PTPs and discuss future work in trade statistics.

    Release date: 2014-11-04

  • Surveys and statistical programs – Documentation: 11-522-X201300014258
    Description:

    The National Fuel Consumption Survey (FCS) was created in 2013 and is a quarterly survey that is designed to analyze distance driven and fuel consumption for passenger cars and other vehicles weighing less than 4,500 kilograms. The sampling frame consists of vehicles extracted from the vehicle registration files, which are maintained by provincial ministries. For collection, FCS uses car chips for a part of the sampled units to collect information about the trips and the fuel consumed. There are numerous advantages to using this new technology, for example, reduction in response burden, collection costs and effects on data quality. For the quarters in 2013, the sampled units were surveyed 95% via paper questionnaires and 5% with car chips, and in Q1 2014, 40% of sampled units were surveyed with car chips. This study outlines the methodology of the survey process, examines the advantages and challenges in processing and imputation for the two collection modes, presents some initial results and concludes with a summary of the lessons learned.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014259
    Description:

    In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014260
    Description: The Survey of Employment, Payrolls and Hours (SEPH) produces monthly estimates and determines the month-to-month changes for variables such as employment, earnings and hours at detailed industrial levels for Canada, the provinces and territories. In order to improve the efficiency of collection activities for this survey, an electronic questionnaire (EQ) was introduced in the fall of 2012. Given the timeframe allowed for this transition as well as the production calendar of the survey, a conversion strategy was developed for the integration of this new mode. The goal of the strategy was to ensure a good adaptation of the collection environment and also to allow the implementation of a plan of analysis that would evaluate the impact of this change on the results of the survey. This paper will give an overview of the conversion strategy, the different adjustments that were made during the transition period and the results of various evaluations that were conducted. For example, the impact of the integration of the EQ on the collection process, the response rate and the follow-up rate will be presented. In addition, the effect that this new collection mode has on the survey estimates will also be discussed. More specifically, the results of a randomized experiment that was conducted in order to determine the presence of a mode effect will be presented.
    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014269
    Description:

    The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014278
    Description:

    In January and February 2014, Statistics Canada conducted a test aiming at measuring the effectiveness of different collection strategies using an online self-reporting survey. Sampled units were contacted using mailed introductory letters and asked to complete the online survey without any interviewer contact. The objectives of this test were to measure the take-up rates for completing an online survey, and to profile the respondents/non-respondents. Different samples and letters were tested to determine the relative effectiveness of the different approaches. The results of this project will be used to inform various social surveys that are preparing to include an internet response option in their surveys. The paper will present the general methodology of the test as well as results observed from collection and the analysis of profiles.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014285
    Description:

    The 2011 National Household Survey (NHS) is a voluntary survey that replaced the traditional mandatory long-form questionnaire of the Canadian census of population. The NHS sampled about 30% of Canadian households and achieved a design-weighted response rate of 77%. In comparison, the last census long form was sent to 20% of households and achieved a response rate of 94%. Based on the long-form data, Statistics Canada traditionally produces two public use microdata files (PUMFs): the individual PUMF and the hierarchical PUMF. Both give information on individuals, but the hierarchical PUMF provides extra information on the household and family relationships between the individuals. To produce two PUMFs, based on the NHS data, that cover the whole country evenly and that do not overlap, we applied a special sub-sampling strategy. Difficulties in the confidentiality analyses have increased because of the numerous new variables, the more detailed geographic information and the voluntary nature of the NHS. This paper describes the 2011 PUMF methodology and how it balances the requirements for more information and for low risk of disclosure.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014290
    Description:

    This paper describes a new module that will project families and households by Aboriginal status using the Demosim microsimulation model. The methodology being considered would assign a household/family headship status annually to each individual and would use the headship rate method to calculate the number of annual families and households by various characteristics and geographies associated with Aboriginal populations.

    Release date: 2014-10-31