Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,770 to 10,780 of 10,894 results)

  • Articles and reports: 12-001-X198400214358
    Description:

    In response to a need for data on disabled persons in Canada, Statistics Canada undertook a program to create a disability database. This includes using supplements to the Canadian Labour Force Survey in the Fall of 1983 and the Spring of 1984, as well as including questions on the 1986 Census of Population. A general discussion of the background and content of the survey is presented. A comparison of screening methodologies conducted by Statistics Canada in November 1982 and January 1983 is presented and the results are compared.

    Release date: 1984-12-14

  • Articles and reports: 12-001-X198400114346
    Description:

    This presentation describes the important and urgent task of providing useful expressions for analytical statistics for complex sample designs. The following topics are discussed: effects of complex designs, sampling error for analytical statistics, subclasses involved in analytical statistics, comparisons of paired means, computation of analytical statistics and categorical data analysis.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114347
    Description:

    Univariate statistical models, linear regression models and generalized linear models are briefly reviewed. Examples of a two-way analysis of variance, a three-way analysis of variance and logistic regression for a three way layout are given.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114348
    Description:

    This paper proposes a modification to the method of Denton (1971) for adjusting sub-annual series to yearly totals. These totals originate from more reliable sources and constitute annual benchmarks. The benchmarked series derived according to the modified method is more parallel to the unbenchmarked series than this is the case with the original method. An additive and a proportional variant of the method are presented. These can easily be adapted for flow, stock and index series. Also presented are a few recommendations about the preliminary benchmarking of current data and the management of “historical” estimates of the series.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114349
    Description:

    Using data from the Family Expenditures Surveys over time, consumer expenditures on in-home and transportation energy from 1969 to 1982 are being studied. This article briefly summarizes some of the procedures being used to explore the data, summarize it and develop insights into shifts in consumption for policy implications purposes. With such a complex data set and such a complex, multi-faceted subject for analysis some effort must be made to reduce information flows and at the same time increase the information content of each factor of both input and output in the analyses.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114350
    Description:

    Standard chisquared (X^2) or likelihood ratio (G^2) tests for logistic regression analysis, involving a binary response variable, are adjusted to take account of the survey design. The adjustments are based on certain generalized design effects. The adjusted statistics are utilized to analyse some data from the October 1980 Canadian Labour Force Survey (LFS). The Wald statistic, which also takes the survey design into account, is also examined for goodness-of-fit of the model and for testing hypotheses on the parameters of the assumed model. Logistic regression diagnostics to detect any outlying cell proportions in the table and influential points in the factor space are applied to the LFS data, after making necessary adjustments to account for the survey design.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114351
    Description:

    Most sample surveys conducted by organizations such as Statistics Canada or the U.S. Bureau of the Census employ complex designs. The design-based approach to statistical inference, typically the institutional standard of inference for simple population statistics such as means and totals, may be extended to parameters of analytic models as well. Most of this paper focuses on application of design-based inferences to such models, but rationales are offered for use of model-based alternatives in some instances, by way of explanation for the author’s observation that both modes of inference are used in practice at his own institution.

    Within the design-based approach to inference, the paper briefly describes experience with linear regression analysis. Recently, variance computations for a number of surveys of the Census Bureau have been implemented through “replicate weighting”; the principal application has been for variances of simple statistics, but this technique also facilitates variance computation for virtually any complex analytic model. Finally, approaches and experience with log-linear models are reported.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114352
    Description:

    The paper shows different estimation methods for complex survey designs. Among others, estimation of mean, ratio and regression coefficient is presented. The standard errors are estimated by different methods: the ordinary least squares procedure, the stratified weighted sample procedure, the stratified unit weight procedure, etc. Theory of large samples and conditions to apply it are also presented.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198300214341
    Description:

    Cost models to determine an optimum allocation of the sample among stages in cluster samples are considered. Results from a proposed cost model, which directly considers the implications of follow-up visits to sample clusters as well as other travel to and from the field by data collectors, are compared with results from existing cost models. The proposed model generally calls for fewer clusters with more elements selected per cluster than the existing models.

    Release date: 1983-12-15

  • Articles and reports: 12-001-X198300214342
    Description:

    This study considers the suitability of composite estimation techniques for the Canadian Labour Force Survey. The performance of a class of AK composite estimators introduced initially by Gurney and Daly is investigated for several characteristics. While the ordinary composite estimate has a large bias, the AK composite estimate is capable of reducing the bias. Composite estimates having minimum variance and minimum mean square error are compared.

    Release date: 1983-12-15
Reference (2,038)

Reference (2,038) (440 to 450 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-648-X2015001
    Description:

    The Longitudinal and International Study of Adults (LISA) has the direct measures of skills from the Program for International Assessment of Adult Competencies (PIAAC) because the two surveys had coordinated collection. The direct measures of skills cover three domains: literacy, numeracy, and problem solving in technology-rich environments. The skills measures are reflected in sets of 10 plausible values (PVs) that were created using a multiple imputation methodology. This paper demonstrates the proper use of the PVs. It also demonstrates that reliable estimates of skills can be produced using LISA and the results are similar to what would be obtained from the PIAAC data.

    Release date: 2015-04-22

  • Notices and consultations: 13-605-X201500314153
    Description:

    The Canadian System of Macroeconomic Accounts (CSMA) is a source of invaluable information for business, governments and citizens. These accounts provide users with important insights into the inner-workings of the economy, current economic trends and interactions between the various sectors of the economy. In order for these accounts to remain relevant, the underlying concepts, methods, classification systems and data sources need to be periodically updated.

    Release date: 2015-03-31

  • Notices and consultations: 12-002-X
    Description:

    The Research Data Centres (RDCs) Information and Technical Bulletin (ITB) is a forum by which Statistics Canada analysts and the research community can inform each other on survey data uses and methodological techniques. Articles in the ITB focus on data analysis and modelling, data management, and best or ineffective statistical, computational, and scientific practices. Further, ITB topics will include essays on data content, implications of questionnaire wording, comparisons of datasets, reviews on methodologies and their application, data peculiarities, problematic data and solutions, and explanations of innovative tools using RDC surveys and relevant software. All of these essays may provide advice and detailed examples outlining commands, habits, tricks and strategies used to make problem-solving easier for the RDC user.

    The main aims of the ITB are:

    - the advancement and dissemination of knowledge surrounding Statistics Canada's data; - the exchange of ideas among the RDC-user community;- the support of new users; - the co-operation with subject matter experts and divisions within Statistics Canada.

    The ITB is interested in quality articles that are worth publicizing throughout the research community, and that will add value to the quality of research produced at Statistics Canada's RDCs.

    Release date: 2015-03-25

  • Notices and consultations: 13-605-X201500214145
    Description:

    Oil and gas exploration, development and production activities continue to grow in importance, making it essential that the appropriate level and growth of these activities are included in the measure of Gross Domestic Product (GDP). Statistics Canada recently began incorporating results from the Quarterly Survey of Capital Expenditures – Oil and Gas Activities in sub-annual GDP statistics (for years 2011, 2013, 2014). This note provides a brief overview of the survey and the incorporation of its results when estimating quarterly investment.

    Release date: 2015-03-03

  • Surveys and statistical programs – Documentation: 99-002-X
    Description: This report describes sampling and weighting procedures used in the 2011 National Household Survey. It provides operational and theoretical justifications for them, and presents the results of the evaluation studies of these procedures.
    Release date: 2015-01-28

  • Surveys and statistical programs – Documentation: 99-002-X2011001
    Description:

    This report describes sampling and weighting procedures used in the 2011 National Household Survey. It provides operational and theoretical justifications for them, and presents the results of the evaluation studies of these procedures.

    Release date: 2015-01-28

  • Surveys and statistical programs – Documentation: 71F0031X2015001
    Geography: Canada
    Description:

    This paper introduces and explains modifications made to the Labour Force Survey estimates in January 2015. Some of these modifications include the adjustment of all LFS estimates to reflect population counts based on the 2011 Census and includes updates to 2011 Geography classification system.

    Release date: 2015-01-28

  • Surveys and statistical programs – Documentation: 62F0026M2015001
    Description:

    This report describes the quality indicators produced for the 2013 Survey of Household Spending. These quality indicators, such as coefficients of variation, nonresponse rates, slippage rates and imputation rates, help users interpret the survey data.

    Release date: 2015-01-22

  • Notices and consultations: 75-513-X2014001
    Description:

    Starting with the 2012 reference year, annual individual and family income data is produced by the Canadian Income Survey (CIS). The CIS is a cross-sectional survey developed to provide information on the income and income sources of Canadians, along with their individual and household characteristics. The CIS reports on many of the same statistics as the Survey of Labour and Income Dynamics (SLID), which last reported on income for the 2011 reference year. This note describes the CIS methodology, as well as the main differences in survey objectives, methodology and questionnaires between CIS and SLID.

    Release date: 2014-12-10

  • Notices and consultations: 11-016-X
    Description: Statistics Canada's Newsletter for Communities offers information to those working for municipal and community organizations about Statistics Canada's data and services. The newsletter also offers links to data releases of the Census and National Household Survey, videos, tutorials, media advisories, learning sessions and presentations.
    Release date: 2014-11-20