Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (90 to 100 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (420 to 430 of 2,038 results)

  • Surveys and statistical programs – Documentation: 11-522-X201700014751
    Description:

    Practically all major retailers use scanners to record the information on their transactions with clients (consumers). These data normally include the product code, a brief description, the price and the quantity sold. This is an extremely relevant data source for statistical programs such as Statistics Canada’s Consumer Price Index (CPI), one of Canada’s most important economic indicators. Using scanner data could improve the quality of the CPI by increasing the number of prices used in calculations, expanding geographic coverage and including the quantities sold, among other things, while lowering data collection costs. However, using these data presents many challenges. An examination of scanner data from a first retailer revealed a high rate of change in product identification codes over a one-year period. The effects of these changes pose challenges from a product classification and estimate quality perspective. This article focuses on the issues associated with acquiring, classifying and examining these data to assess their quality for use in the CPI.

    Release date: 2016-03-24

  • Surveys and statistical programs – Documentation: 11-018-X
    Description: Reports on Plans and Priorities (RPP) are individual expenditure plans for each department and agency. These reports provide increased levels of detail over a three-year period on an organization's main priorities by strategic outcome, program and planned/expected results, including links to related resource requirements presented in the Main Estimates. In conjunction with the Main Estimates, Reports on Plans and Priorities serve to inform members of Parliament on planned expenditures of departments and agencies, and support Parliament's consideration of supply bills. The RPPs are typically tabled soon after the Main Estimates by the President of the Treasury Board.
    Release date: 2016-03-07

  • Surveys and statistical programs – Documentation: 89-654-X2016003
    Description:

    This paper describes the process that led to the creation of the new Disability Screening Questions (DSQ), jointly developped by Statistics Canada and Employment and Social Development Canada. The DSQ form a new module which can be put on general population surveys to allow comparisons of persons with and without a disability. The paper explains why there are two versions of the DSQ—a long and a short one—, the difference between the two, and how each version can be used.

    Release date: 2016-02-29

  • Surveys and statistical programs – Documentation: 62F0026M2016001
    Description:

    This report describes the quality indicators produced for the 2014 Survey of Household Spending. These quality indicators, such as coefficients of variation, nonresponse rates, slippage rates and imputation rates, help users interpret the survey data.

    Release date: 2016-02-12

  • Classification: 12-603-X
    Description: Canadian Classification of Institutional Units and Sectors (CCIUS) 2012 is the departmental standard for classifying institutional units and sectors. This classification is used for economic statistics and includes definitions for its 171 classes. CCIUS 2012 was developed as a result of the implementation of international recommendations published in the 2008 System of National Accounts manual (SNA 2008).
    Release date: 2016-02-11

  • Surveys and statistical programs – Documentation: 11-629-X2016001
    Description: Introductory video for the survey provided to respondents at the household and posted on the Canadian Health Measures Survey Respondent relations (Statcan) website.
    Release date: 2016-01-05

  • Surveys and statistical programs – Documentation: 75F0002M2015003
    Description:

    This note discusses revised income estimates from the Survey of Labour and Income Dynamics (SLID). These revisions to the SLID estimates make it possible to compare results from the Canadian Income Survey (CIS) to earlier years. The revisions address the issue of methodology differences between SLID and CIS.

    Release date: 2015-12-17

  • Notices and consultations: 13-605-X201501314304
    Description:

    This note provides users with a reconciliation between Canadian and American measures of household disposable income, debt and the household credit market debt to disposable income ratio.

    Release date: 2015-12-14

  • Surveys and statistical programs – Documentation: 99-137-X
    Description:

    Statistics Canada has produced a hierarchical PUMF that relies on perturbation instead of suppression to protect data confidentiality. This paper describes the creation of this new type of PUMF for the Agency. The creation of this PUMF using data perturbation techniques, a first for Statistics Canada, was in many ways a research development project. In the process, ways were devised to avoid overlap with other PUMFs, to adapt and apply risk measures for a multitude of personal and household characteristics, and to carry out perturbations for related characteristics.

    Release date: 2015-12-10

  • Surveys and statistical programs – Documentation: 98-503-X2015001
    Description:

    The 2016 Census Teacher’s Kit has been developed for use in elementary, intermediate and secondary classes across the country. All activities are classroom-ready and have been reviewed to meet curriculum requirements.

    Release date: 2015-12-01