Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (20 to 30 of 13,366 results)

  • Table: 10-10-0023-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Canadian government finance statistics (CGFS), statement of operations and balance sheet for government business enterprises, by North American Industry Classification System (NAICS), annual (dollars x 1,000,000).
    Release date: 2026-11-20

  • Table: 10-10-0109-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 110 series, with data starting from 1946 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Assets and liabilities (110 items: Total assets; Total; Canadian dollar assets; Total of foregoing assets; Total; foreign currency assets ...).
    Release date: 2026-11-20

  • Table: 10-10-0112-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 75 series, with data starting from 1926 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Currency outside banks and chartered bank deposits (75 items: Total; currency and deposits; Currency outside banks; coin; Currency outside banks; notes; Currency outside banks ...).
    Release date: 2026-11-20

  • Table: 10-10-0116-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 66 series, with data starting from 1953 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Assets, liabilities and monetary aggregates (66 items: Chartered bank deposits; personal (excluding personal; chequable; demand); Currency outside banks and Canadian dollar chartered bank deposits; total; Currency outside banks and chartered bank deposits; held by general public; Chartered bank deposits; demand (excluding private sector float) ...).
    Release date: 2026-11-20

  • Table: 10-10-0132-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 7 series, with data starting from 1972 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Commodity (7 items: Total; all commodities; Metals and Minerals; Energy; Total excluding energy ...).
    Release date: 2026-11-20

  • Table: 10-10-0138-01
    Frequency: Weekly
    Description: This table contains 12 series, with data starting from 1954 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: United States); Rates (12 items: Federal Reserve Bank of New York - discount rate; Prime rate charged by banks; Federal funds rate;Commercial paper, adjusted: 1 month; ...).
    Release date: 2026-11-20

  • Table: 10-10-0139-01
    Geography: Canada
    Frequency: Daily
    Description: This table contains 39 series, with data for starting from 1991 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Financial market statistics (39 items: Government of Canada Treasury Bills, 1-month (composite rates); Government of Canada Treasury Bills, 2-month (composite rates); Government of Canada Treasury Bills, 3-month (composite rates);Government of Canada Treasury Bills, 6-month (composite rates); ...).
    Release date: 2026-11-20

  • Table: 10-10-0143-01
    Geography: Canada
    Frequency: Weekly
    Description: This table contains 7 series, with data starting from 1972 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Commodity (7 items: Total, all commodities; Total excluding energy; Energy; Metals and Minerals; ...).
    Release date: 2026-11-20

  • Table: 10-10-0145-01
    Geography: Canada
    Frequency: Weekly
    Description: This table contains 38 series, with data starting from 1957 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Rates (38 items: Bank rate; Chartered bank administered interest rates - prime business; Chartered bank - consumer loan rate; Forward premium or discount (-), United States dollars in Canada: 1 month; ...).
    Release date: 2026-11-20

  • Table: 10-10-0147-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description:

    Canadian Government Finance Statistics (CGFS), statement of operations and balance sheet for consolidated Canadian general government and consolidated provincial-territorial and local governments, annual (dollars x 1,000,000), data series beginning in 2007.

    Release date: 2026-11-20
Analysis (10,894)

Analysis (10,894) (1,290 to 1,300 of 10,894 results)

  • Articles and reports: 75-006-X202400100001
    Description: Using data from the Canadian Community Health Survey, this study examines men’s and women’s coverage for four types of drug insurance plans (government-sponsored, employer-sponsored, association-sponsored and private drug insurance plans), disaggregated by various socioeconomic, demographic and geographical factors. The study further examines the extent of cost-related medication non-adherence among men and women, disaggregated by type of drug insurance plan.
    Release date: 2024-01-10

  • Stats in brief: 11-001-X202401037854
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2024-01-10

  • Articles and reports: 12-001-X202300200001
    Description: When a Medicare healthcare provider is suspected of billing abuse, a population of payments X made to that provider over a fixed timeframe is isolated. A certified medical reviewer, in a time-consuming process, can determine the overpayment Y = X - (amount justified by the evidence) associated with each payment. Typically, there are too many payments in the population to examine each with care, so a probability sample is selected. The sample overpayments are then used to calculate a 90% lower confidence bound for the total population overpayment. This bound is the amount demanded for recovery from the provider. Unfortunately, classical methods for calculating this bound sometimes fail to provide the 90% confidence level, especially when using a stratified sample.

    In this paper, 166 redacted samples from Medicare integrity investigations are displayed and described, along with 156 associated payment populations. The 7,588 examined (Y, X) sample pairs show (1) Medicare audits have high error rates: more than 76% of these payments were considered to have been paid in error; and (2) the patterns in these samples support an “All-or-Nothing” mixture model for (Y, X) previously defined in the literature. Model-based Monte Carlo testing procedures for Medicare sampling plans are discussed, as well as stratification methods based on anticipated model moments. In terms of viability (achieving the 90% confidence level) a new stratification method defined here is competitive with the best of the many existing methods tested and seems less sensitive to choice of operating parameters. In terms of overpayment recovery (equivalent to precision) the new method is also comparable to the best of the many existing methods tested. Unfortunately, no stratification algorithm tested was ever viable for more than about half of the 104 test populations.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200002
    Description: Being able to quantify the accuracy (bias, variance) of published output is crucial in official statistics. Output in official statistics is nearly always divided into subpopulations according to some classification variable, such as mean income by categories of educational level. Such output is also referred to as domain statistics. In the current paper, we limit ourselves to binary classification variables. In practice, misclassifications occur and these contribute to the bias and variance of domain statistics. Existing analytical and numerical methods to estimate this effect have two disadvantages. The first disadvantage is that they require that the misclassification probabilities are known beforehand and the second is that the bias and variance estimates are biased themselves. In the current paper we present a new method, a Gaussian mixture model estimated by an Expectation-Maximisation (EM) algorithm combined with a bootstrap, referred to as the EM bootstrap method. This new method does not require that the misclassification probabilities are known beforehand, although it is more efficient when a small audit sample is used that yields a starting value for the misclassification probabilities in the EM algorithm. We compared the performance of the new method with currently available numerical methods: the bootstrap method and the SIMEX method. Previous research has shown that for non-linear parameters the bootstrap outperforms the analytical expressions. For nearly all conditions tested, the bias and variance estimates that are obtained by the EM bootstrap method are closer to their true values than those obtained by the bootstrap and SIMEX methods. We end this paper by discussing the results and possible future extensions of the method.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200003
    Description: We investigate small area prediction of general parameters based on two models for unit-level counts. We construct predictors of parameters, such as quartiles, that may be nonlinear functions of the model response variable. We first develop a procedure to construct empirical best predictors and mean square error estimators of general parameters under a unit-level gamma-Poisson model. We then use a sampling importance resampling algorithm to develop predictors for a generalized linear mixed model (GLMM) with a Poisson response distribution. We compare the two models through simulation and an analysis of data from the Iowa Seat-Belt Use Survey.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200004
    Description: We present a novel methodology to benchmark county-level estimates of crop area totals to a preset state total subject to inequality constraints and random variances in the Fay-Herriot model. For planted area of the National Agricultural Statistics Service (NASS), an agency of the United States Department of Agriculture (USDA), it is necessary to incorporate the constraint that the estimated totals, derived from survey and other auxiliary data, are no smaller than administrative planted area totals prerecorded by other USDA agencies except NASS. These administrative totals are treated as fixed and known, and this additional coherence requirement adds to the complexity of benchmarking the county-level estimates. A fully Bayesian analysis of the Fay-Herriot model offers an appealing way to incorporate the inequality and benchmarking constraints, and to quantify the resulting uncertainties, but sampling from the posterior densities involves difficult integration, and reasonable approximations must be made. First, we describe a single-shrinkage model, shrinking the means while the variances are assumed known. Second, we extend this model to accommodate double shrinkage, borrowing strength across means and variances. This extended model has two sources of extra variation, but because we are shrinking both means and variances, it is expected that this second model should perform better in terms of goodness of fit (reliability) and possibly precision. The computations are challenging for both models, which are applied to simulated data sets with properties resembling the Illinois corn crop.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200005
    Description: Population undercoverage is one of the main hurdles faced by statistical analysis with non-probability survey samples. We discuss two typical scenarios of undercoverage, namely, stochastic undercoverage and deterministic undercoverage. We argue that existing estimation methods under the positivity assumption on the propensity scores (i.e., the participation probabilities) can be directly applied to handle the scenario of stochastic undercoverage. We explore strategies for mitigating biases in estimating the mean of the target population under deterministic undercoverage. In particular, we examine a split population approach based on a convex hull formulation, and construct estimators with reduced biases. A doubly robust estimator can be constructed if a followup subsample of the reference probability survey with measurements on the study variable becomes feasible. Performances of six competing estimators are investigated through a simulation study and issues which require further investigation are briefly discussed.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200006
    Description: Survey researchers are increasingly turning to multimode data collection to deal with declines in survey response rates and increasing costs. An efficient approach offers the less costly modes (e.g., web) followed with a more expensive mode for a subsample of the units (e.g., households) within each primary sampling unit (PSU). We present two alternatives to this traditional design. One alternative subsamples PSUs rather than units to constrain costs. The second is a hybrid design that includes a clustered (two-stage) sample and an independent, unclustered sample. Using a simulation, we demonstrate the hybrid design has considerable advantages.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200007
    Description: Conformal prediction is an assumption-lean approach to generating distribution-free prediction intervals or sets, for nearly arbitrary predictive models, with guaranteed finite-sample coverage. Conformal methods are an active research topic in statistics and machine learning, but only recently have they been extended to non-exchangeable data. In this paper, we invite survey methodologists to begin using and contributing to conformal methods. We introduce how conformal prediction can be applied to data from several common complex sample survey designs, under a framework of design-based inference for a finite population, and we point out gaps where survey methodologists could fruitfully apply their expertise. Our simulations empirically bear out the theoretical guarantees of finite-sample coverage, and our real-data example demonstrates how conformal prediction can be applied to complex sample survey data in practice.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200008
    Description: In this article, we use a slightly simplified version of the method by Fickus, Mixon and Poteet (2013) to define a flexible parameterization of the kernels of determinantal sampling designs with fixed first-order inclusion probabilities. For specific values of the multidimensional parameter, we get back to a matrix from the family PII from Loonis and Mary (2019). We speculate that, among the determinantal designs with fixed inclusion probabilities, the minimum variance of the Horvitz and Thompson estimator (1952) of a variable of interest is expressed relative to PII. We provide experimental R programs that facilitate the appropriation of various concepts presented in the article, some of which are described as non-trivial by Fickus et al. (2013). A longer version of this article, including proofs and a more detailed presentation of the determinantal designs, is also available.
    Release date: 2024-01-03
Reference (2,038)

Reference (2,038) (400 to 410 of 2,038 results)

  • Surveys and statistical programs – Documentation: 81-582-X2016001
    Description:

    The Pan-Canadian Education Indicators Program (PCEIP) draws from a wide variety of data sources to provide information on the school-age population, elementary, secondary and postsecondary education, transitions, and labour market outcomes. PCEIP products include tables, fact sheets, reports and a methodological handbook. They present indicators for all of Canada, the provinces, the territories, as well as selected international comparisons and comparisons over time. The Pan-Canadian Education Indicators Program (PCEIP) is an ongoing initiative of the Canadian Education Statistics Council, a partnership between Statistics Canada and the Council of Ministers of Education, Canada that provides a set of statistical measures on education systems in Canada.

    Release date: 2016-06-21

  • Surveys and statistical programs – Documentation: 13-606-G201600114616
    Description:

    An introduction and overview of the Canadian System of Macroeconomic Accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-606-G201600114618
    Description:

    An explanation of key national accounting concepts involving stocks and flows; the distinction between price and volume changes; production, distribution, consumption and accumulation; residence; institutional units and sectors; classifications; and accounting concepts. Also includes a description of SNA 2008’s sequence of accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-606-G201600114619
    Description:

    An explanation of the structure and concepts of Canada’s supply and use accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-607-X
    Description: The Methodological Guide: Canadian System of Macroeconomic Accounts provides readers with information on macroeconomic accounts at Statistics Canada. It provides links to produced data and publications and describes the concepts, sources, and methods used to compile them. Topics include gross domestic product, national economic accounts (incomes, expenditures, savings, capital formation, financial flows and balance sheet accounts), supply and use tables, provincial and territorial economic accounts, productivity, balance of payments, international investment position and government finance statistics.

    This user's guide has been developed by the Macroeconomic Accounts Program to facilitate access to macroeconomic accounting information throughout Statistics Canada and to explain its linkage with international standards, such as the System of National Accounts, 2008. This guide is continually being updated to maintain its relevance.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 16-509-X
    Description: The Methodological Guide: Canadian System of Environmental-Economic Accounting provides readers with information on environmental-economic accounts at Statistics Canada. It provides links to produced data and publications and describes the concepts, sources, and methods used to compile them. Topics include ecosystem accounting, asset accounts (natural resources in physical and monetary terms), physical flow accounts (energy and water use, and waste and greenhouse gas emissions), environmental activity statistics (expenditures on environmental protection), and the applications and extensions of those accounts (attribution of physical flows to final demand and intensity measures).

    This user's guide has been developed by the Environmental Statistics Program to facilitate access to environmental-economic accounting information throughout Statistics Canada and to explain its linkage with international standards, the United Nations System of Environmental-Economic Accounting. This guide is continually being updated to maintain its relevance.

    Release date: 2016-04-22

  • Notices and consultations: 92-140-X
    Description:

    Before each Census of Population, Statistics Canada carries out a three- to four-year process to review the content of the census questionnaires in consultation with census data users, performing tests and developing questionnaire content to ensure that it takes into account the evolution of Canadian society. Factors considered in developing the content include legislative requirements regarding information, program and policy requirements; the burden placed on respondents to respond to questions; concerns about privacy; feedback from consultations and tests; data quality; costs and operational considerations; the comparability of data with earlier data and the availability of alternative data sources. Before each census, Statistics Canada tests the questionnaire content through an extensive test. The content report presents the analyses conducted from the data collected from this test and the results that are used to fine tune the questionnaires, the methodology and the systems used for the Census Program.

    Release date: 2016-04-01

  • Notices and consultations: 92-140-X2016001
    Description:

    The 2016 Census Program Content Test was conducted from May 2 to June 30, 2014. The Test was designed to assess the impact of any proposed content changes to the 2016 Census Program and to measure the impact of including a social insurance number (SIN) question on the data quality.

    This quantitative test used a split-panel design involving 55,000 dwellings, divided into 11 panels of 5,000 dwellings each: five panels were dedicated to the Content Test while the remaining six panels were for the SIN Test. Two models of test questionnaires were developed to meet the objectives, namely a model with all the proposed changes EXCEPT the SIN question and a model with all the proposed changes INCLUDING the SIN question. A third model of 'control' questionnaire with the 2011 content was also developed. The population living in a private dwelling in mail-out areas in one of the ten provinces was targeted for the test. Paper and electronic response channels were part of the Test as well.

    This report presents the Test objectives, the design and a summary of the analysis in order to determine potential content for the 2016 Census Program. Results from the data analysis of the Test were not the only elements used to determine the content for 2016. Other elements were also considered, such as response burden, comparison over time and users’ needs.

    Release date: 2016-04-01

  • Surveys and statistical programs – Documentation: 72-210-G
    Description: The Guide to Job Vacancy Statistics provides an overview of the structure of the survey and covers topics such as survey methodology, data quality as well as terms and definitions.
    Release date: 2016-03-31

  • Surveys and statistical programs – Documentation: 11-522-X201700014706
    Description:

    Over the last decade, Statistics Canada’s Producer Prices Division has expanded its service producer price indexes program and continued to improve its goods and construction producer price indexes program. While the majority of price indexes are based on traditional survey methods, efforts were made to increase the use of administrative data and alternative data sources in order to reduce burden on our respondents. This paper focuses mainly on producer price programs, but also provides information on the growing importance of alternative data sources at Statistics Canada. In addition, it presents the operational challenges and risks that statistical offices could face when relying more and more on third-party outputs. Finally, it presents the tools being developed to integrate alternative data while collecting metadata.

    Release date: 2016-03-24