Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (400 to 410 of 13,366 results)

  • Table: 18-10-0245-01
    Geography: Canada, Province or territory, Population centre
    Frequency: Monthly
    Description: Monthly average retail prices for selected products, for Canada, provinces, Whitehorse and Yellowknife. Prices are presented for the current month and the previous four months. Prices are based on transaction data from Canadian retailers, and are presented in Canadian current dollars.
    Release date: 2026-11-04

  • Table: 18-10-0245-02
    Geography: Canada, Province or territory, Population centre
    Frequency: Monthly
    Description: Monthly average retail prices for selected food products, for Canada and provinces. Prices are presented for the current month and the previous four months. Prices are based on transaction data from Canadian retailers, and are presented in Canadian current dollars.
    Release date: 2026-11-04

  • Table: 10-10-0113-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 107 series, with data starting from 1946 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Government of Canada direct securities and loans (107 items: Classification by type of issue; total outstanding; Total; direct securities outstanding; Treasury Bills; Guaranteed securities ...).
    Release date: 2026-11-04

  • Table: 12-10-0011-01
    Geography: Canada
    Frequency: Monthly
    Description: International merchandise trade data grouped by Principal Trading Partners (PTP). Users have the option of selecting Imports, Exports, or Trade Balance. Data are unadjusted and seasonally adjusted, and are on a Customs and Balance of Payments basis.
    Release date: 2026-11-04

  • Table: 12-10-0099-01
    Geography: Canada, Province or territory
    Frequency: Monthly
    Description: This table contains 37312 series, with data starting from 1990 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (15 items: Canada; Newfoundland and Labrador; Prince Edward Island; Nova Scotia; ...);  Trade (4 items: Total exports; Domestic exports; Re-exports; Total imports);  United States (53 items: Total United States; Alaska; Alabama; Arkansas; ...);  Harmonized System (HS) Sections (22 items: Total Harmonized System (HS) sections; I - Live animals and animal products; II - Vegetable products; III - Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; ...).
    Release date: 2026-11-04

  • Table: 12-10-0127-01
    Geography: Canada
    Frequency: Quarterly
    Description:

    International merchandise trade data grouped by Principal Trading Partners (PTP). Users have the option of selecting Imports, Exports or Trade Balance. Data are unadjusted and seasonally adjusted, on a Customs and Balance of Payments basis, at a quarterly frequency.

    Release date: 2026-11-04

  • Table: 12-10-0129-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description:

    Canadian domestic export concentration, by destination market, product and province of production. Users have the option of selecting a concentration ratio as well as an index of the ratio for Canada, the provinces and territories. Data by destination market are available for all countries combined as well as for all countries excluding the United States.

    Release date: 2026-11-04

  • Table: 12-10-0143-01
    Geography: Canada
    Frequency: Annual
    Description:

    International merchandise trade data aggregated by codes of the Classification by Broad Economic Categories Rev. 5 (BEC Rev. 5). Users have the option of selecting imports and exports by BEC Rev. 5 code, the country of origin and the country of destination. Data are annual and on customs basis.

    Release date: 2026-11-04

  • Table: 12-10-0144-01
    Geography: Canada
    Frequency: Monthly
    Description:

    Monthly international trade in services statistics are compiled as a nowcast of the quarterly international trade in services data. Statistics Canada first projects the next quarter’s totals (using previous quarterly actuals as an input) via an autoregressive integrated moving average (ARIMA) model and then disaggregates the quarter using a monthly indicator series. Adjustments are made each month as new information is made available.

    Release date: 2026-11-04

  • Table: 12-10-0163-01
    Geography: Canada
    Frequency: Monthly
    Description: International merchandise trade data grouped by North American Product Classification System (NAPCS) section. Users have the option of selecting Imports and Exports. Data are unadjusted and seasonally adjusted, on a Customs and Balance of Payments basis, at a monthly frequency.
    Release date: 2026-11-04
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (1,900 to 1,910 of 2,038 results)

  • Surveys and statistical programs – Documentation: 5315
    Description: The purpose of the Survey on Savings for Persons with Disabilities is to gather information about the knowledge and behaviours of Canadians with disabilities and their caregivers with regard to savings.

  • Surveys and statistical programs – Documentation: 5317
    Description: The survey is designed to collect information from businesses on issues of skills requirements and skills development, as well as on the strategies deployed to mitigate the consequences of skill gaps within their businesses.

  • Surveys and statistical programs – Documentation: 5318
    Description: The purpose of this survey is to collect information on businesses in Canada related to emerging issues. This iteration of the survey focuses on business expectations and business conditions in Canada. In addition, the questionnaire for the first quarter of 2024 includes a component specifically for non-profit organizations (NPOs). The intent of this set of questions is to address a present data gap and to provide a better understanding of the non-profit sector.

  • Surveys and statistical programs – Documentation: 5319
    Description: The data contain detailed confirmed cases of coronavirus disease (COVID-19) in Canada, which is compiled by the Public Health Agency of Canada, with the contribution from provincial and territorial Health ministries.

  • Surveys and statistical programs – Documentation: 5320
    Description: The purpose of this data collection is to provide early insight into the educational, employment and financial impacts of the COVID-19 pandemic on postsecondary students. Students will be asked about concerns regarding their academic future and financial constraints. This information can be used by governments and other organizations to evaluate the need for services and assistance programs during and after the pandemic.

  • Surveys and statistical programs – Documentation: 5323
    Description: The collection series collects data on the current economic and social situation, as well as on people's physical and mental health, to effectively assess the needs of communities and implement suitable support measures during and after the pandemic.

  • Surveys and statistical programs – Documentation: 5325
    Description: The survey collects data on aircraft movements at airports in Canada with NAV CANADA towers.

  • Surveys and statistical programs – Documentation: 5326
    Description: During the COVID-19 pandemic, many public service employees have experienced major changes in their work and lifestyle. In light of this, a series of questionnaires has been developed to gather information that will help departments and agencies shed light on the impact of these changes on employees, and that will allow us to be agile and adapt over time.

  • Surveys and statistical programs – Documentation: 5327
    Description: The objective of this survey is to collect information related to the Canada Emergency Business Account to verify if the funds from this program are helping Canadian businesses during the COVID-19 pandemic.

  • Surveys and statistical programs – Documentation: 5328
    Description: The purpose of the Impacts of COVID-19 on Canadian Victim Services survey is to collect information on the impacts of COVID-19 restrictions on the operations of Canadian victim service programs, including factors that have affected their ability to provide services and how they have adapted their operations to continue to serve victims.