Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,040 to 3,050 of 10,894 results)

  • Articles and reports: 12-001-X202000100001
    Description:

    For several decades, national statistical agencies around the world have been using probability surveys as their preferred tool to meet information needs about a population of interest. In the last few years, there has been a wind of change and other data sources are being increasingly explored. Five key factors are behind this trend: the decline in response rates in probability surveys, the high cost of data collection, the increased burden on respondents, the desire for access to “real-time” statistics, and the proliferation of non-probability data sources. Some people have even come to believe that probability surveys could gradually disappear. In this article, we review some approaches that can reduce, or even eliminate, the use of probability surveys, all the while preserving a valid statistical inference framework. All the approaches we consider use data from a non-probability source; data from a probability survey are also used in most cases. Some of these approaches rely on the validity of model assumptions, which contrasts with approaches based on the probability sampling design. These design-based approaches are generally not as efficient; yet, they are not subject to the risk of bias due to model misspecification.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100002
    Description:

    Model-based methods are required to estimate small area parameters of interest, such as totals and means, when traditional direct estimation methods cannot provide adequate precision. Unit level and area level models are the most commonly used ones in practice. In the case of the unit level model, efficient model-based estimators can be obtained if the sample design is such that the sample and population models coincide: that is, the sampling design is non-informative for the model. If on the other hand, the sampling design is informative for the model, the selection probabilities will be related to the variable of interest, even after conditioning on the available auxiliary data. This will imply that the population model no longer holds for the sample. Pfeffermann and Sverchkov (2007) used the relationships between the population and sample distribution of the study variable to obtain approximately unbiased semi-parametric predictors of the area means under informative sampling schemes. Their procedure is valid for both sampled and non-sampled areas.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100003
    Description:

    Probability sampling designs are sometimes used in conjunction with model-based predictors of finite population quantities. These designs should minimize the anticipated variance (AV), which is the variance over both the superpopulation and sampling processes, of the predictor of interest. The AV-optimal design is well known for model-assisted estimators which attain the Godambe-Joshi lower bound for the AV of design-unbiased estimators. However, no optimal probability designs have been found for model-based prediction, except under conditions such that the model-based and model-assisted estimators coincide; these cases can be limiting. This paper shows that the Godambe-Joshi lower bound is an upper bound for the AV of the best linear unbiased estimator of a population total, where the upper bound is over the space of all covariate sets. Therefore model-assisted optimal designs are a sensible choice for model-based prediction when there is uncertainty about the form of the final model, as there often would be prior to conducting the survey. Simulations confirm the result over a range of scenarios, including when the relationship between the target and auxiliary variables is nonlinear and modeled using splines. The AV is lowest relative to the bound when an important design variable is not associated with the target variable.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100004
    Description: Cut-off sampling is applied when there is a subset of units from the population from which getting the required information is too expensive or difficult and, therefore, those units are deliberately excluded from sample selection. If those excluded units are different from the sampled ones in the characteristics of interest, naïve estimators may be severely biased. Calibration estimators have been proposed to reduce the design-bias. However, when estimating in small domains, they can be inefficient even in the absence of cut-off sampling. Model-based small area estimation methods may prove useful for reducing the bias due to cut-off sampling if the assumed model holds for the whole population. At the same time, for small domains, these methods provide more efficient estimators than calibration methods. Since model-based properties are obtained assuming that the model holds but no model is exactly true, here we analyze the design properties of calibration and model-based procedures for estimation of small domain characteristics under cut-off sampling. Our results confirm that model-based estimators reduce the bias due to cut-off sampling and perform significantly better in terms of design mean squared error.
    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100005
    Description:

    Selecting the right sample size is central to ensure the quality of a survey. The state of the art is to account for complex sampling designs by calculating effective sample sizes. These effective sample sizes are determined using the design effect of central variables of interest. However, in face-to-face surveys empirical estimates of design effects are often suspected to be conflated with the impact of the interviewers. This typically leads to an over-estimation of design effects and consequently risks misallocating resources towards a higher sample size instead of using more interviewers or improving measurement accuracy. Therefore, we propose a corrected design effect that separates the interviewer effect from the effects of the sampling design on the sampling variance. The ability to estimate the corrected design effect is tested using a simulation study. In this respect, we address disentangling cluster and interviewer variance. Corrected design effects are estimated for data from the European Social Survey (ESS) round 6 and compared with conventional design effect estimates. Furthermore, we show that for some countries in the ESS round 6 the estimates of conventional design effect are indeed strongly inflated by interviewer effects.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100006
    Description:

    In surveys, logical boundaries among variables or among waves of surveys make imputation of missing values complicated. We propose a new regression-based multiple imputation method to deal with survey nonresponses with two-sided logical boundaries. This imputation method automatically satisfies the boundary conditions without an additional acceptance/rejection procedure and utilizes the boundary information to derive an imputed value and to determine the suitability of the imputed value. Simulation results show that our new imputation method outperforms the existing imputation methods for both mean and quantile estimations regardless of missing rates, error distributions, and missing-mechanisms. We apply our method to impute the self-reported variable “years of smoking” in successive health screenings of Koreans.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100038
    Description:

    This article presents an impact analysis and 2020 outlook for the Couriers and messenger services price index (CMSPI) amid the COVID-19 pandemic.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100033
    Description:

    Over the past few decades, computer technology has gradually changed workplaces, leading to a reduction of routine and manual job tasks, and an increase in non-routine, cognitive tasks. More recent developments in artificial intelligence and machine learning could be even more far-reaching, as they are designed to execute tasks that were traditionally considered non-automatable.

    Release date: 2020-06-29

  • Stats in brief: 11-001-X202018122563
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2020-06-29

  • Articles and reports: 13-604-M2020001
    Description:

    The ultimate goal of Government Finance Statistics (GFS) compilation is to disseminate data to policymakers and other users in order to assess government financial performance/position, and the impact of fiscal policy on the economy. To achieve this goal, the data should be comprehensive in terms of institutions coverage which has the greatest impact on data quality and comparability. This article looks at best practices for defining and delineating the Public Sector in Canadian macroeconomic statistics.

    Release date: 2020-06-29
Reference (2,038)

Reference (2,038) (720 to 730 of 2,038 results)

  • Surveys and statistical programs – Documentation: 62F0026M2005001
    Description:

    This paper provides some guidance to users on the use of medians and also gives some examples of situations when it can be a more appropriate measure than the average.

    Release date: 2005-05-17

  • Surveys and statistical programs – Documentation: 85-564-X
    Geography: Province or territory
    Description:

    This objective of this report is to present the status of national data on Aboriginal people who come into contact with the criminal justice system as offenders and victims. The report examines the current and potential collection of an individual's Aboriginal identity through various justice-related surveys at Statistics Canada, the challenges within these surveys to collect these data and provides some insight into the quality of these data. The data and sources are examined within the context of information needs for the justice and social policy sectors, and in relation to the preferred method of measuring Aboriginal Identity at Statistics Canada. Data sources examined include the Incident-based Uniform Crime Reporting Survey, the Homicide Survey, the Integrated Criminal Courts Survey, the Adult Corrections Survey, the Youth Custody and Community Services Survey, the Youth Alternative Measures Survey, the Transition Home Survey, the Victim Services Survey and the General Social Survey on Victimization. Finally, the report briefly describes efforts by other countries to improve justice-related information on their indigenous populations.

    Release date: 2005-05-10

  • Surveys and statistical programs – Documentation: 11F0026M2005004
    Description:

    A statistical agency faces several challenges in building Productivity Accounts. Measures of productivity require that outputs be compared to inputs.

    This paper discusses the challenges that a statistical agency faces in this area -as illustrated by the Canadian experience. First, it examines the progress that has been made in developing a system that integrates the Productivity Accounts into the overall System of National Accounts. It also discusses deficiencies that still need to be overcome. Finally, the paper focuses on the need to consider whether the SNA manual should be extended into the area of productivity measurement. The paper argues that the advantage of integrating productivity accounts into the general accounts is sufficiently great that it is time to include more detail on the nature of productivity accounts in the general SNA framework.

    Release date: 2005-04-28

  • Notices and consultations: 13-605-X20050018502
    Description:

    The National Accounts Advisory Committee reviews and gives advice on the concepts, methods, plans, standards as well as results associated with Statistics Canada's System of National Accounts.

    Release date: 2005-04-11

  • Notices and consultations: 10C0012
    Description:

    The resource centre provides consulting services to users of record linkage methods. Consultations may vary from recommendations of methodology to collaborative work on record linkage applications. Advice concerning record linkage software is also provided in collaboration with personnel of Systems Development Division. Areas of expertise include:

    - file preprocessing;

    - specification of comparison rules;

    - estimation of agreement probabilities; and

    - error rate estimation.

    Release date: 2005-04-01

  • Surveys and statistical programs – Documentation: 75F0002M2005002
    Description:

    This paper describes the changes made to the structure of geography information on SLID from reference year 1999 onwards. It goes into reasons for changing to the 2001 Census-based geography, shows how the overlap between the 1991 and 2001 Census-based concepts are handled, provides detail on how the geographic concepts are implemented, discusses a new imputation procedure and finishes with an illustration of the impact of these changes on selected tables.

    Release date: 2005-03-31

  • Surveys and statistical programs – Documentation: 89-552-M2005013
    Geography: Canada
    Description:

    This report documents key aspects of the development of the International Adult Literacy and Life Skills Survey (ALL) - its theoretical roots, the domains selected for possible assessment, the approaches taken to assessment in each domain and the criteria that were employed to decide which domains were to be carried in the final design. As conceived, the ALL survey was meant to build on the success of the International Adult Literacy Survey (IALS) assessments by extending the range of skills assessed and by improving the quality of the assessment methods employed. This report documents several successes including: · the development of a new framework and associated robust measures for problem solving · the development of a powerful numeracy framework and associated robust measures · the specification of frameworks for practical cognition, teamwork and information and communication technology literacy The report also provides insight into those domains where development failed to yield approaches to assessment of sufficient quality, insight that reminds us that scientific advance in this domain is hard won.

    Release date: 2005-03-24

  • Surveys and statistical programs – Documentation: 96-328-M
    Geography: Canada
    Description:

    This teacher's kit focuses on secondary school subject areas: family studies/home economics; geography; history; and science. The lessons are connected to curricula across Canada.

    The publication contains short analytical articles and full-colour maps, photographs, charts and graphs on different aspects of Canada's agriculture industry. Written in plain language for students, the book uses Census of Agriculture and other data.

    Release date: 2005-03-18

  • Surveys and statistical programs – Documentation: 96-328-M2004030
    Geography: Canada
    Description:

    This activity looks at the increase in greenhouse area in Canada, and how this industry is changing.

    Release date: 2005-03-18

  • Surveys and statistical programs – Documentation: 96-328-M2004031
    Description:

    This activity looks at how greenhouses in the North are changing the ways in which people in more remote regions of the country have access to fresh produce for a longer part of the year.

    Release date: 2005-03-18