Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,040 to 3,050 of 10,894 results)

  • Articles and reports: 12-001-X202000100001
    Description:

    For several decades, national statistical agencies around the world have been using probability surveys as their preferred tool to meet information needs about a population of interest. In the last few years, there has been a wind of change and other data sources are being increasingly explored. Five key factors are behind this trend: the decline in response rates in probability surveys, the high cost of data collection, the increased burden on respondents, the desire for access to “real-time” statistics, and the proliferation of non-probability data sources. Some people have even come to believe that probability surveys could gradually disappear. In this article, we review some approaches that can reduce, or even eliminate, the use of probability surveys, all the while preserving a valid statistical inference framework. All the approaches we consider use data from a non-probability source; data from a probability survey are also used in most cases. Some of these approaches rely on the validity of model assumptions, which contrasts with approaches based on the probability sampling design. These design-based approaches are generally not as efficient; yet, they are not subject to the risk of bias due to model misspecification.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100002
    Description:

    Model-based methods are required to estimate small area parameters of interest, such as totals and means, when traditional direct estimation methods cannot provide adequate precision. Unit level and area level models are the most commonly used ones in practice. In the case of the unit level model, efficient model-based estimators can be obtained if the sample design is such that the sample and population models coincide: that is, the sampling design is non-informative for the model. If on the other hand, the sampling design is informative for the model, the selection probabilities will be related to the variable of interest, even after conditioning on the available auxiliary data. This will imply that the population model no longer holds for the sample. Pfeffermann and Sverchkov (2007) used the relationships between the population and sample distribution of the study variable to obtain approximately unbiased semi-parametric predictors of the area means under informative sampling schemes. Their procedure is valid for both sampled and non-sampled areas.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100003
    Description:

    Probability sampling designs are sometimes used in conjunction with model-based predictors of finite population quantities. These designs should minimize the anticipated variance (AV), which is the variance over both the superpopulation and sampling processes, of the predictor of interest. The AV-optimal design is well known for model-assisted estimators which attain the Godambe-Joshi lower bound for the AV of design-unbiased estimators. However, no optimal probability designs have been found for model-based prediction, except under conditions such that the model-based and model-assisted estimators coincide; these cases can be limiting. This paper shows that the Godambe-Joshi lower bound is an upper bound for the AV of the best linear unbiased estimator of a population total, where the upper bound is over the space of all covariate sets. Therefore model-assisted optimal designs are a sensible choice for model-based prediction when there is uncertainty about the form of the final model, as there often would be prior to conducting the survey. Simulations confirm the result over a range of scenarios, including when the relationship between the target and auxiliary variables is nonlinear and modeled using splines. The AV is lowest relative to the bound when an important design variable is not associated with the target variable.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100004
    Description: Cut-off sampling is applied when there is a subset of units from the population from which getting the required information is too expensive or difficult and, therefore, those units are deliberately excluded from sample selection. If those excluded units are different from the sampled ones in the characteristics of interest, naïve estimators may be severely biased. Calibration estimators have been proposed to reduce the design-bias. However, when estimating in small domains, they can be inefficient even in the absence of cut-off sampling. Model-based small area estimation methods may prove useful for reducing the bias due to cut-off sampling if the assumed model holds for the whole population. At the same time, for small domains, these methods provide more efficient estimators than calibration methods. Since model-based properties are obtained assuming that the model holds but no model is exactly true, here we analyze the design properties of calibration and model-based procedures for estimation of small domain characteristics under cut-off sampling. Our results confirm that model-based estimators reduce the bias due to cut-off sampling and perform significantly better in terms of design mean squared error.
    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100005
    Description:

    Selecting the right sample size is central to ensure the quality of a survey. The state of the art is to account for complex sampling designs by calculating effective sample sizes. These effective sample sizes are determined using the design effect of central variables of interest. However, in face-to-face surveys empirical estimates of design effects are often suspected to be conflated with the impact of the interviewers. This typically leads to an over-estimation of design effects and consequently risks misallocating resources towards a higher sample size instead of using more interviewers or improving measurement accuracy. Therefore, we propose a corrected design effect that separates the interviewer effect from the effects of the sampling design on the sampling variance. The ability to estimate the corrected design effect is tested using a simulation study. In this respect, we address disentangling cluster and interviewer variance. Corrected design effects are estimated for data from the European Social Survey (ESS) round 6 and compared with conventional design effect estimates. Furthermore, we show that for some countries in the ESS round 6 the estimates of conventional design effect are indeed strongly inflated by interviewer effects.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100006
    Description:

    In surveys, logical boundaries among variables or among waves of surveys make imputation of missing values complicated. We propose a new regression-based multiple imputation method to deal with survey nonresponses with two-sided logical boundaries. This imputation method automatically satisfies the boundary conditions without an additional acceptance/rejection procedure and utilizes the boundary information to derive an imputed value and to determine the suitability of the imputed value. Simulation results show that our new imputation method outperforms the existing imputation methods for both mean and quantile estimations regardless of missing rates, error distributions, and missing-mechanisms. We apply our method to impute the self-reported variable “years of smoking” in successive health screenings of Koreans.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100038
    Description:

    This article presents an impact analysis and 2020 outlook for the Couriers and messenger services price index (CMSPI) amid the COVID-19 pandemic.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100033
    Description:

    Over the past few decades, computer technology has gradually changed workplaces, leading to a reduction of routine and manual job tasks, and an increase in non-routine, cognitive tasks. More recent developments in artificial intelligence and machine learning could be even more far-reaching, as they are designed to execute tasks that were traditionally considered non-automatable.

    Release date: 2020-06-29

  • Stats in brief: 11-001-X202018122563
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2020-06-29

  • Articles and reports: 13-604-M2020001
    Description:

    The ultimate goal of Government Finance Statistics (GFS) compilation is to disseminate data to policymakers and other users in order to assess government financial performance/position, and the impact of fiscal policy on the economy. To achieve this goal, the data should be comprehensive in terms of institutions coverage which has the greatest impact on data quality and comparability. This article looks at best practices for defining and delineating the Public Sector in Canadian macroeconomic statistics.

    Release date: 2020-06-29
Reference (2,038)

Reference (2,038) (600 to 610 of 2,038 results)

  • Surveys and statistical programs – Documentation: 97-561-G2006003
    Description:

    This guide focuses on the following topic: Journey to work.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-06-10

  • Surveys and statistical programs – Documentation: 75F0002M2008002
    Description: The Survey of Labour and Income Dynamics (SLID) conducts an annual labour and income interview in January. The data are collected using computer-assisted interviewing; thus no paper questionnaire is required for data collection. The questions, responses and interview flow for labour and income are documented in another SLID research paper. This document presents the information for the 2007 entry and exit portions of the labour and income interview (reference year 2006).

    The entry exit component consists of five separate modules. The entry module is the first set of data collected. It is information collected to update the place of residence, housing conditions and expenses, as well as the household composition. For each person identified in entry, the demographics module collects (or updates) the person's name, date of birth, sex and marital status. Then the relationships module identifies (or updates) the relationship between each respondent and every other household member. The exit module includes questions on who to contact for the next interview and the names, phone numbers and addresses of two contacts to be used only if future tracing of respondents is required. An overview of the tracing component is also included in this document.

    Release date: 2008-05-30

  • Surveys and statistical programs – Documentation: 75F0002M2008003
    Description: The Survey of Labour and Income Dynamics (SLID) is a longitudinal survey which collects information related to the standard of living of individuals and their families. By interviewing the same people over a period of six years, changes and the causes of these changes can be monitored.

    A preliminary interview of background information is collected for all respondents aged 16 and over, who enter the SLID sample. Preliminary interviews are conducted for new household members during their first labour and income interview after they join the household. A labour and income interview is collected each year for all respondents 16 years of age and over.

    The purpose of this document is to present the questions, possible responses and question flows for the 2007 preliminary, labour and income questionnaire (for the 2006 reference year).

    Release date: 2008-05-30

  • Surveys and statistical programs – Documentation: 89-631-X
    Description:

    This report highlights the latest developments and rationale behind recent cycles of the General Social Survey (GSS). Starting with an overview of the GSS mandate and historic cycle topics, we then focus on two recent cycles related to families in Canada: Family Transitions (2006) and Family, Social Support and Retirement (2007). Finally, we give a summary of what is to come in the 2008 GSS on Social Networks, and describe a special project to mark 'Twenty Years of GSS'.

    The survey collects data over a twelve month period from the population living in private households in the 10 provinces. For all cycles except Cycles 16 and 21, the population aged 15 and older has been sampled. Cycles 16 and 21 sampled persons aged 45 and older.

    Cycle 20 (GSS 2006) is the fourth cycle of the GSS to collect data on families (the first three cycles on the family were in 1990, 1995 and 2001). Cycle 20 covers much the same content as previous cycles on families with some sections revised and expanded. The data enable analysts to measure conjugal and fertility history (chronology of marriages, common-law unions, and children), family origins, children's home leaving, fertility intentions, child custody as well as work history and other socioeconomic characteristics. Questions on financial support agreements or arrangements (for children and the ex-spouse or ex-partner) for separated and divorced families have been modified. Also, sections on social networks, well-being and housing characteristics have been added.

    Release date: 2008-05-27

  • Surveys and statistical programs – Documentation: 97-554-G
    Description: This guide focuses on the following demographic variable: Housing and dwelling characteristics.
    Release date: 2008-05-01

  • Surveys and statistical programs – Documentation: 97-554-G2006003
    Description:

    This guide focuses on the following variable: Housing and dwelling characteristics.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-05-01

  • Surveys and statistical programs – Documentation: 97-555-G
    Description: These guides provide information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.
    Release date: 2008-04-08

  • 608. Labour, 2006 Census Archived
    Surveys and statistical programs – Documentation: 97-559-P
    Description: This guide focuses on the following topics: Labour market activity and Unpaid work.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-08

  • Surveys and statistical programs – Documentation: 97-561-P
    Description:

    This guide focuses on the following topic: Journey to work. Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-08

  • Surveys and statistical programs – Documentation: 97-555-G2006003
    Description:

    This guide focuses on the following demographic variables: First official language spoken, Home language, Knowledge of non-official languages, Knowledge of official languages, Language of work, and Mother tongue.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-08