Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,040 to 3,050 of 10,894 results)

  • Articles and reports: 12-001-X202000100001
    Description:

    For several decades, national statistical agencies around the world have been using probability surveys as their preferred tool to meet information needs about a population of interest. In the last few years, there has been a wind of change and other data sources are being increasingly explored. Five key factors are behind this trend: the decline in response rates in probability surveys, the high cost of data collection, the increased burden on respondents, the desire for access to “real-time” statistics, and the proliferation of non-probability data sources. Some people have even come to believe that probability surveys could gradually disappear. In this article, we review some approaches that can reduce, or even eliminate, the use of probability surveys, all the while preserving a valid statistical inference framework. All the approaches we consider use data from a non-probability source; data from a probability survey are also used in most cases. Some of these approaches rely on the validity of model assumptions, which contrasts with approaches based on the probability sampling design. These design-based approaches are generally not as efficient; yet, they are not subject to the risk of bias due to model misspecification.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100002
    Description:

    Model-based methods are required to estimate small area parameters of interest, such as totals and means, when traditional direct estimation methods cannot provide adequate precision. Unit level and area level models are the most commonly used ones in practice. In the case of the unit level model, efficient model-based estimators can be obtained if the sample design is such that the sample and population models coincide: that is, the sampling design is non-informative for the model. If on the other hand, the sampling design is informative for the model, the selection probabilities will be related to the variable of interest, even after conditioning on the available auxiliary data. This will imply that the population model no longer holds for the sample. Pfeffermann and Sverchkov (2007) used the relationships between the population and sample distribution of the study variable to obtain approximately unbiased semi-parametric predictors of the area means under informative sampling schemes. Their procedure is valid for both sampled and non-sampled areas.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100003
    Description:

    Probability sampling designs are sometimes used in conjunction with model-based predictors of finite population quantities. These designs should minimize the anticipated variance (AV), which is the variance over both the superpopulation and sampling processes, of the predictor of interest. The AV-optimal design is well known for model-assisted estimators which attain the Godambe-Joshi lower bound for the AV of design-unbiased estimators. However, no optimal probability designs have been found for model-based prediction, except under conditions such that the model-based and model-assisted estimators coincide; these cases can be limiting. This paper shows that the Godambe-Joshi lower bound is an upper bound for the AV of the best linear unbiased estimator of a population total, where the upper bound is over the space of all covariate sets. Therefore model-assisted optimal designs are a sensible choice for model-based prediction when there is uncertainty about the form of the final model, as there often would be prior to conducting the survey. Simulations confirm the result over a range of scenarios, including when the relationship between the target and auxiliary variables is nonlinear and modeled using splines. The AV is lowest relative to the bound when an important design variable is not associated with the target variable.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100004
    Description: Cut-off sampling is applied when there is a subset of units from the population from which getting the required information is too expensive or difficult and, therefore, those units are deliberately excluded from sample selection. If those excluded units are different from the sampled ones in the characteristics of interest, naïve estimators may be severely biased. Calibration estimators have been proposed to reduce the design-bias. However, when estimating in small domains, they can be inefficient even in the absence of cut-off sampling. Model-based small area estimation methods may prove useful for reducing the bias due to cut-off sampling if the assumed model holds for the whole population. At the same time, for small domains, these methods provide more efficient estimators than calibration methods. Since model-based properties are obtained assuming that the model holds but no model is exactly true, here we analyze the design properties of calibration and model-based procedures for estimation of small domain characteristics under cut-off sampling. Our results confirm that model-based estimators reduce the bias due to cut-off sampling and perform significantly better in terms of design mean squared error.
    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100005
    Description:

    Selecting the right sample size is central to ensure the quality of a survey. The state of the art is to account for complex sampling designs by calculating effective sample sizes. These effective sample sizes are determined using the design effect of central variables of interest. However, in face-to-face surveys empirical estimates of design effects are often suspected to be conflated with the impact of the interviewers. This typically leads to an over-estimation of design effects and consequently risks misallocating resources towards a higher sample size instead of using more interviewers or improving measurement accuracy. Therefore, we propose a corrected design effect that separates the interviewer effect from the effects of the sampling design on the sampling variance. The ability to estimate the corrected design effect is tested using a simulation study. In this respect, we address disentangling cluster and interviewer variance. Corrected design effects are estimated for data from the European Social Survey (ESS) round 6 and compared with conventional design effect estimates. Furthermore, we show that for some countries in the ESS round 6 the estimates of conventional design effect are indeed strongly inflated by interviewer effects.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X202000100006
    Description:

    In surveys, logical boundaries among variables or among waves of surveys make imputation of missing values complicated. We propose a new regression-based multiple imputation method to deal with survey nonresponses with two-sided logical boundaries. This imputation method automatically satisfies the boundary conditions without an additional acceptance/rejection procedure and utilizes the boundary information to derive an imputed value and to determine the suitability of the imputed value. Simulation results show that our new imputation method outperforms the existing imputation methods for both mean and quantile estimations regardless of missing rates, error distributions, and missing-mechanisms. We apply our method to impute the self-reported variable “years of smoking” in successive health screenings of Koreans.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100038
    Description:

    This article presents an impact analysis and 2020 outlook for the Couriers and messenger services price index (CMSPI) amid the COVID-19 pandemic.

    Release date: 2020-06-30

  • Stats in brief: 45-28-0001202000100033
    Description:

    Over the past few decades, computer technology has gradually changed workplaces, leading to a reduction of routine and manual job tasks, and an increase in non-routine, cognitive tasks. More recent developments in artificial intelligence and machine learning could be even more far-reaching, as they are designed to execute tasks that were traditionally considered non-automatable.

    Release date: 2020-06-29

  • Stats in brief: 11-001-X202018122563
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2020-06-29

  • Articles and reports: 13-604-M2020001
    Description:

    The ultimate goal of Government Finance Statistics (GFS) compilation is to disseminate data to policymakers and other users in order to assess government financial performance/position, and the impact of fiscal policy on the economy. To achieve this goal, the data should be comprehensive in terms of institutions coverage which has the greatest impact on data quality and comparability. This article looks at best practices for defining and delineating the Public Sector in Canadian macroeconomic statistics.

    Release date: 2020-06-29
Reference (2,038)

Reference (2,038) (450 to 460 of 2,038 results)

  • Notices and consultations: 11-017-X
    Description: Statistics Canada's Newsletter for Small and Medium-sized Businesses offers information to the business community about Statistics Canada's data and services. The newsletter also offers links to data releases of the Census and National Household Survey, videos, tutorials, media advisories, learning sessions and presentations.
    Release date: 2014-11-20

  • Surveys and statistical programs – Documentation: 13-605-X201400514088
    Description:

    An overview of the Canadian Government Finance Statistics (CGFS) framework; how it relates to other government statistics such as the Canadian System of Macroeconomic Accounts and the Public Accounts; and the new GFS data products available to users

    Release date: 2014-11-07

  • Notices and consultations: 13-605-X201400414107
    Description:

    Beginning in November 2014, International Trade in goods data will be provided on a Balance of Payments (BOP) basis for additional country detail. In publishing this data, BOP-based exports to and imports from 27 countries, referred to as Canada’s Principal Trading Partners (PTPs), will be highlighted for the first time. BOP-based trade in goods data will be available for countries such as China and Mexico, Brazil and India, South Korea, and our largest European Union trading partners, in response to substantial demand for information on these countries in recent years. Until now, Canada’s geographical trading patterns have been examined almost exclusively through analysis of Customs-based trade data. Moreover, BOP trade in goods data for these countries will be available alongside the now quarterly Trade in Services data as well as annual Foreign Direct Investment data for many of these Principal Trading Partners, facilitating country-level international trade and investment analysis using fully comparable data. The objective of this article is to introduce these new measures. This note will first walk users through the key BOP concepts, most importantly the concept of change in ownership. This will serve to familiarize analysts with the Balance of Payments framework for analyzing country-level data, in contrast to Customs-based trade data. Second, some preliminary analysis will be reviewed to illustrate the concepts, with provisional estimates for BOP-based trade with China serving as the principal example. Lastly, we will outline the expansion of quarterly trade in services to generate new estimates of trade for the PTPs and discuss future work in trade statistics.

    Release date: 2014-11-04

  • Surveys and statistical programs – Documentation: 11-522-X201300014258
    Description:

    The National Fuel Consumption Survey (FCS) was created in 2013 and is a quarterly survey that is designed to analyze distance driven and fuel consumption for passenger cars and other vehicles weighing less than 4,500 kilograms. The sampling frame consists of vehicles extracted from the vehicle registration files, which are maintained by provincial ministries. For collection, FCS uses car chips for a part of the sampled units to collect information about the trips and the fuel consumed. There are numerous advantages to using this new technology, for example, reduction in response burden, collection costs and effects on data quality. For the quarters in 2013, the sampled units were surveyed 95% via paper questionnaires and 5% with car chips, and in Q1 2014, 40% of sampled units were surveyed with car chips. This study outlines the methodology of the survey process, examines the advantages and challenges in processing and imputation for the two collection modes, presents some initial results and concludes with a summary of the lessons learned.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014259
    Description:

    In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014260
    Description: The Survey of Employment, Payrolls and Hours (SEPH) produces monthly estimates and determines the month-to-month changes for variables such as employment, earnings and hours at detailed industrial levels for Canada, the provinces and territories. In order to improve the efficiency of collection activities for this survey, an electronic questionnaire (EQ) was introduced in the fall of 2012. Given the timeframe allowed for this transition as well as the production calendar of the survey, a conversion strategy was developed for the integration of this new mode. The goal of the strategy was to ensure a good adaptation of the collection environment and also to allow the implementation of a plan of analysis that would evaluate the impact of this change on the results of the survey. This paper will give an overview of the conversion strategy, the different adjustments that were made during the transition period and the results of various evaluations that were conducted. For example, the impact of the integration of the EQ on the collection process, the response rate and the follow-up rate will be presented. In addition, the effect that this new collection mode has on the survey estimates will also be discussed. More specifically, the results of a randomized experiment that was conducted in order to determine the presence of a mode effect will be presented.
    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014269
    Description:

    The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014278
    Description:

    In January and February 2014, Statistics Canada conducted a test aiming at measuring the effectiveness of different collection strategies using an online self-reporting survey. Sampled units were contacted using mailed introductory letters and asked to complete the online survey without any interviewer contact. The objectives of this test were to measure the take-up rates for completing an online survey, and to profile the respondents/non-respondents. Different samples and letters were tested to determine the relative effectiveness of the different approaches. The results of this project will be used to inform various social surveys that are preparing to include an internet response option in their surveys. The paper will present the general methodology of the test as well as results observed from collection and the analysis of profiles.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014285
    Description:

    The 2011 National Household Survey (NHS) is a voluntary survey that replaced the traditional mandatory long-form questionnaire of the Canadian census of population. The NHS sampled about 30% of Canadian households and achieved a design-weighted response rate of 77%. In comparison, the last census long form was sent to 20% of households and achieved a response rate of 94%. Based on the long-form data, Statistics Canada traditionally produces two public use microdata files (PUMFs): the individual PUMF and the hierarchical PUMF. Both give information on individuals, but the hierarchical PUMF provides extra information on the household and family relationships between the individuals. To produce two PUMFs, based on the NHS data, that cover the whole country evenly and that do not overlap, we applied a special sub-sampling strategy. Difficulties in the confidentiality analyses have increased because of the numerous new variables, the more detailed geographic information and the voluntary nature of the NHS. This paper describes the 2011 PUMF methodology and how it balances the requirements for more information and for low risk of disclosure.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014290
    Description:

    This paper describes a new module that will project families and households by Aboriginal status using the Demosim microsimulation model. The methodology being considered would assign a household/family headship status annually to each individual and would use the headship rate method to calculate the number of annual families and households by various characteristics and geographies associated with Aboriginal populations.

    Release date: 2014-10-31