Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (8,790 to 8,800 of 10,894 results)

  • Articles and reports: 11-522-X20010016236
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    The Uniform Crime Reporting (UCR) Program has devoted a considerable amount of resources in a continuous effort to improve the quality of its data. In this paper, the authors introduce and discuss the use of the cross-ratios and chi-square measures to evaluate the rationality of the data. The UCR data is used to empirically illustrate this approach.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016237
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Secondary users of health information often assume that administrative data provides a relatively sound basis for making important planning and policy decisions. If errors are evenly or randomly distributed, this assumption may have little impact on these decisions. However, when information sources contain systematic errors, or when systematic errors are introduced during the creation of master files, this assumption can be damaging.

    The most common systematic errors involve underreporting activities for a specific population; inaccurate re-coding of spatial information; and differences in data entry protocols, which have raised questions about the consistency of data submitted by different tracking agencies. The Central East Health Information Partnership (CEHIP) has identified a number of systematic errors in administrative databases and has documented many of these in reports distributed to partner organizations.

    This paper describes how some of these errors were identified and notes the processes that give rise to the loss of data integrity. The conclusion addresses some of the impacts these problems have for health planners, program managers and policy makers.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016238
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Research programs building on population-based, longitudinal administrative data and record-linkage techniques are found in England, Scotland, the United States (the Mayo Clinic), Western Australia and Canada. These systems can markedly expand both the methodological and the substantive research in health and health care.

    This paper summarizes published, Canadian data quality studies regarding registries, hospital discharges, prescription drugs, and physician claims. It makes suggestions for improving registries, facilitating record linkage and expanding research into social epidemiology. New trends in case identification and health status measurement using administrative data have also been noted. And the differing needs for data quality research in each province have been highlighted.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016241
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Leslie Kish long advocated the use of the "rolling sample" design. With non-overlapping, monthly panels that can be cumulated over different lengths of time for domains of different sizes, the rolling sample design enables a single survey to serve multiple purposes. The Census Bureau's new American Community Survey uses such a rolling sample design with annual averages to measure change at the state level, and three-year or five-year moving averages to describe progressively smaller domains. This paper traces Kish's influence on the development of the American Community Survey, and discusses some practical methodological issues that had to be addressed during the implementation of the design.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016242
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    "Remembering Leslie Kish" provides us with a personal view of his many contributions to the international development of statistics. One of the elements that made his contributions so special and effective was the "Kish approach". The characteristic features of this approach include: identifying what is important; formulating and answering practical questions; seeking patterns and frameworks; and above all, persisting in the promotion of good ideas. Areas in which his technical contributions have made the most impact on practical survey work in developing countries have been identified. A unique aspect of Leslie's contribution is the motivation he created for the development of a world-wide community of survey samplers.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016243
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Since 1996, the Census Bureau has been creating Web Computerized Self-Administered Questionnaires (CSAQs). These electronic questionnaires have some data quality advantages over paper questionnaires such as the availability of online help; pre-loaded data; the use of interactive edits (which allows respondents to correct their responses as they are entered); and, for establishment surveys, the ability to import data from spreadsheets. This paper provides an overview of the Census Bureau's Web CSAQs. Each of the Web CSAQ design features promoting data quality are explained, as well as the features that impose data quality obstacles. Finally, some recent, empirical, data quality results from both establishment and household surveys are presented.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016244
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Over the past few years, Statistics New Zealand (SNZ) has experienced an increase in the volume of business survey data supplied by e-mail. However, up until now, SNZ has not had the business processes available to support electronic collection in a way that meets both the needs of SNZ and data suppliers. To this end, SNZ has invested a lot of effort over the last year in investigating how best to approach the problems and opportunities presented by electronic data collection. This paper outlines SNZ's plans to move the e-mail supplied data to a secure lodgement facility and the future development of an internet-based data collection system. It also presents a case study of the Monthly Retail Trade Survey data currently supplied by e-mail. This case study illustrates some of the benefits of electronic data, but also examines some of the costs to the organization and the data quality problems encountered. It also highlights the need to consider the data collection methodology within the wider context of the total survey cycle.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016245
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    This paper summarizes recent Australian Bureau of Statistics (ABS) methodological developments and other experiences with electronic data reporting (EDR). It deals particularly with the part of EDR loosely defined as 'e-forms', or screen-based direct collection instruments, where the respondent manually enters all or most of the data. In this context, the paper covers recent ABS experiences and current work, but does not revisit the historical EDR work or cover other developments in Australia outside the ABS.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016246
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    Samples sizes in small population areas are typically very small. As a result, customary, area-specific, direct estimators of Small Area Means do not provide acceptable quality in terms of Mean Square Error (MSE). Indirect estimators that borrow strength from related areas by linking models based on similar auxiliary data are now widely used for small area estimation. Such linking models are either implicit (as in the case of synthetic estimators) or explicit (as in the case of model-based estimators). In the Frequentist approach, the quality of an indirect estimator is measured by its estimated MSE while the posterior variance of the Small Area Mean is used in the Bayesian approach. This paper reviews some recent work on estimating MSE and the evaluation of posterior variance.

    Release date: 2002-09-12

  • Articles and reports: 11-522-X20010016247
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    This paper describes joint research by the Office for National Statistics (ONS) and Southampton University regarding the evaluation of several different approaches to the local estimation of International Labour Office (ILO) unemployment. The need to compare estimators with different underlying assumptions has led to a focus on evaluation methods that are (partly at least) model-independent. Model-fit diagnostics that have been considered include: various residual procedures, cross-validation, predictive validation, consistency with marginals, and consistency with direct estimates within single cells. These diagnostics have been used to compare different model-based estimators with each other and with direct estimators.

    Release date: 2002-09-12
Reference (2,038)

Reference (2,038) (260 to 270 of 2,038 results)

  • Surveys and statistical programs – Documentation: 75-514-G2020001
    Description:

    The Guide to the Job Vacancy and Wage Survey contains a dictionary of concepts and definitions, and includes topics such as survey methodology, data collection, processing, and data quality.

    Release date: 2020-12-15

  • Surveys and statistical programs – Documentation: 89-20-0005
    Description: Ever wanted to create your own maps, or integrate and visualize datasets to examine changes between locations and over time, or assess relations between variables? Geographic Information Systems (GIS) are the go-to programs for processing, integrating and visualizing spatial data, and conveying information in a widely-accessible and intuitive format. Follow along with these tutorials and learn the key concepts and procedures for performing common GIS tasks - such as creating maps, joining and overlaying datasets, and examining spatial variations.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020018
    Description: In this follow up QGIS tutorial on geoprocessing tools, we’ll use the Dissolve and Aggregate tools with the riparian land-cover layer to examine the distribution of different land-cover classes over the entire clip area and by specific watershed respectively.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020019
    Description: This QGIS tutorial provides an introduction to raster datasets, covering procedures for processing, exporting and visualizing these datasets – demonstrated with the single-band Digital Elevation Model (DEM) rasters downloaded from Open Maps.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020020
    Description: In this follow-up QGIS tutorial on raster data we’ll explore common tools and derivatives of Digital Elevation Models (DEMs) and show how to use the Raster Calculator to select and combine rasters.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 37-20-00012020005
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2018 data with other administrative data. Statistics Canada has derived a series of indicators on the pathways of newly registered journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-12-09

  • Surveys and statistical programs – Documentation: 89-20-00052020016
    Description: This QGIS tutorial covers semi-automated mapping over multiple areas of interest using a coverage layer, which defines the map areas, and the Atlas Panel in the Print Layout window. These procedures facilitate rapidly generating maps - reducing manual efforts in production.
    Release date: 2020-11-24

  • Surveys and statistical programs – Documentation: 89-20-00052020017
    Description: This QGIS tutorial introduces geoprocessing tools – which are used to overlay and combine layers based on their spatial distributions.
    Release date: 2020-11-24

  • Surveys and statistical programs – Documentation: 89-20-00052020014
    Description: In this two-part QGIS demo we’ll cover procedures for creating maps in the Print Layout - a separate window from the main interface. Follow along as we demonstrate accessing the Print Layout, navigating the available tools and panels, as well as adding and formatting mandatory map items with the joined census division and population layers created in Demo 12.
    Release date: 2020-11-23

  • Surveys and statistical programs – Documentation: 89-20-00052020015
    Description: In this follow-up tutorial, we’ll add some additional map items and then export the map begun in Part I. Follow along as we show the procedures for adding and formatting optional items such as inset (or overview) maps, numeric scale-bars, logos and attribute tables, as well as the available formats for exporting.
    Release date: 2020-11-23