Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,410 to 12,420 of 13,366 results)

  • Table: 53-219-X
    Description:

    Data on registration of motor vehicles by type including passenger automobiles, trucks, motorcycles, buses, trailers and others are presented in this publication. A historical table of total registrations is provided. Motor vehicle registrations are shown by census divisions and municipalities where available. Data definitions, analysis, the methodology employed, an explanation of data quality and a bibliography are included.

    Release date: 1999-11-04

  • Table: 61-223-X
    Description:

    This on-line publication provides detailed capital expenditures by type of asset on both construction and machinery and equipment made by private and public organizations in Canada. For each province and territory and for the 19 divisions of the Canadian economy, it details capital expenditures according to four types of residential construction, 95 types of non-residential construction, and 56 categories of machinery and equipment. Included are data on capital expenditures for major renovation and alteration of construction assets as well as for major retrofit and refurbishing of machinery and equipment assets. Trade and general construction contractors, suppliers of construction materials, and suppliers of machinery and equipment will find these data useful for market analysis.

    Release date: 1999-11-04

  • 12,413. The Sugar Situation Archived
    Table: 32-013-X
    Description:

    This monthly publication presents data by weight on the acquisition, stock, production and shipment of raw and refined sugar for the month and the year-to-date from refiners of raw cane or beet sugars as well as those who further process such sugars. Geographic detail is at the national level. The December issue includes a list of reporting firms.

    Release date: 1999-11-03

  • Public use microdata: 89M0018X
    Description:

    This is a CD-ROM product from the Ontario Adult Literacy Survey (OALS), conducted in the spring of 1998 with the goal of providing information on: the ability of Ontario immigrants to use either English or French in their daily activities; and on their self-perceived literacy skills, training needs and barriers to training.

    In order to cover the majority of Ontario immigrants, the Census Metropolitan Areas (CMAs) of Toronto, Hamilton, Ottawa, Kitchener, London and St. Catharines were included in the sample. With these 6 CMAs, about 83% of Ontario immigrants were included in the sample frame. This sample of 7,107 dwellings covered the population of Ontario immigrants in general as well as specifically targetting immigrants with a mother tongue of Italian, Chinese, Portuguese, Polish, and Spanish and immigrants born in the Caribbean Islands with a mother tongue of English.

    Each interview was approximately 1.5 hours in duration and consisted of a half-hour questionnaire, asking demographic and literacy-related questions as well as a one-hour literacy test. This literacy test was derived from that used in the 1994 International Adult Literacy Survey (IALS) and covered the domains of document and quantitative literacy. An overall response rate to the survey of 76% was achieved, resulting in 4,648 respondents.

    Release date: 1999-10-29

  • 12,415. Services Price Indexes Archived
    Table: 62F0040X
    Description:

    This occasional on-line bulletin series presents price indexes published by the Goods and Services Producing Industries Section, Prices Division. Each issue will contain different service price indexes.

    Release date: 1999-10-14

  • Table: 62F0040X1999002
    Description:

    Consulting Engineering Services Price Index (CEPI) is an annual index that measures changes in the prices for services provided by consulting engineers. These services encompass advisory and design work as well as construction or project management. They are provided for many types of projects (fields of specialization), and to both Canadian and foreign clients. Price indexes are published for 10 fields of specialization as well as for national, regional, and foreign markets.

    Release date: 1999-10-14

  • 12,417. Non-metal Mines Archived
    Table: 26-224-X
    Description:

    The publication presents data on establishments, employment, payroll, materials and supplies used; production and shipments; drilling completed and tonnage of ore removed. It also includes a list of establishments, notes and definitions and a bibliography.

    Release date: 1999-10-13

  • 12,418. Quarries and Sand Pits Archived
    Table: 26-225-X
    Description:

    The publication presents data on establishments, employment, payroll, material, supplies, fuel and electricity used, product shipments and consumption. Data are presented by province. It includes a list of establishments, definitions and a bibliography.

    Release date: 1999-10-13

  • Table: 13-215-X
    Geography: Canada
    Description:

    This annual publication presents detailed tabulations on income of two-spouse families. It highlights families where both spouses work for pay by exploring their income and related characteristics and comparing them with other two-spouse families where only one spouse, or neither spouse, receives earnings from employment.

    Release date: 1999-09-10

  • 12,420. Unionization - an update Archived
    Table: 75-001-X19990034686
    Description:

    This update of Perspectives' socio-demographic and economic profile of union members provides unionization rates according to the new North American Industry Classification System and the 1991 Standard Occupational Classification. The update, which extends to the provincial level, also includes data on earnings, wage settlements, inflation, and strikes and lockouts.

    Release date: 1999-09-01
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (260 to 270 of 2,038 results)

  • Surveys and statistical programs – Documentation: 75-514-G2020001
    Description:

    The Guide to the Job Vacancy and Wage Survey contains a dictionary of concepts and definitions, and includes topics such as survey methodology, data collection, processing, and data quality.

    Release date: 2020-12-15

  • Surveys and statistical programs – Documentation: 89-20-0005
    Description: Ever wanted to create your own maps, or integrate and visualize datasets to examine changes between locations and over time, or assess relations between variables? Geographic Information Systems (GIS) are the go-to programs for processing, integrating and visualizing spatial data, and conveying information in a widely-accessible and intuitive format. Follow along with these tutorials and learn the key concepts and procedures for performing common GIS tasks - such as creating maps, joining and overlaying datasets, and examining spatial variations.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020018
    Description: In this follow up QGIS tutorial on geoprocessing tools, we’ll use the Dissolve and Aggregate tools with the riparian land-cover layer to examine the distribution of different land-cover classes over the entire clip area and by specific watershed respectively.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020019
    Description: This QGIS tutorial provides an introduction to raster datasets, covering procedures for processing, exporting and visualizing these datasets – demonstrated with the single-band Digital Elevation Model (DEM) rasters downloaded from Open Maps.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 89-20-00052020020
    Description: In this follow-up QGIS tutorial on raster data we’ll explore common tools and derivatives of Digital Elevation Models (DEMs) and show how to use the Raster Calculator to select and combine rasters.
    Release date: 2020-12-11

  • Surveys and statistical programs – Documentation: 37-20-00012020005
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2018 data with other administrative data. Statistics Canada has derived a series of indicators on the pathways of newly registered journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-12-09

  • Surveys and statistical programs – Documentation: 89-20-00052020016
    Description: This QGIS tutorial covers semi-automated mapping over multiple areas of interest using a coverage layer, which defines the map areas, and the Atlas Panel in the Print Layout window. These procedures facilitate rapidly generating maps - reducing manual efforts in production.
    Release date: 2020-11-24

  • Surveys and statistical programs – Documentation: 89-20-00052020017
    Description: This QGIS tutorial introduces geoprocessing tools – which are used to overlay and combine layers based on their spatial distributions.
    Release date: 2020-11-24

  • Surveys and statistical programs – Documentation: 89-20-00052020014
    Description: In this two-part QGIS demo we’ll cover procedures for creating maps in the Print Layout - a separate window from the main interface. Follow along as we demonstrate accessing the Print Layout, navigating the available tools and panels, as well as adding and formatting mandatory map items with the joined census division and population layers created in Demo 12.
    Release date: 2020-11-23

  • Surveys and statistical programs – Documentation: 89-20-00052020015
    Description: In this follow-up tutorial, we’ll add some additional map items and then export the map begun in Part I. Follow along as we show the procedures for adding and formatting optional items such as inset (or overview) maps, numeric scale-bars, logos and attribute tables, as well as the available formats for exporting.
    Release date: 2020-11-23