Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (25,840 to 25,850 of 26,768 results)

  • Articles and reports: 12-001-X197600100005
    Description: This paper presents the Behrens-Fisher problem and gives an overview of the major solutions brought forward to this date. The aim of the paper is to use the most appropriate approach to the problem for testing sets of six month Labour Force Survey data against those of a pilot study. This is done since in many cases (such as Methods Test Panel studies) studies are conducted for six consecutive months and comparisons are required on the basis of those sets of six month data. Empirical results are also given by testing Methods Test Panel Phase III data against corresponding Labour Force Survey data.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197600100006
    Description: Multi-stage statistical surveys as a means of obtaining socioeconomic characteristics for the population have been in use for many years. Each survey requires an extensive and precise sample design which is governed by the cost structure for obtaining the data and the variance of the characteristic data between units at various stages of sampling. The authors analyzed variance components derived from one month's data of the Canadian Labour Force Survey and examined the variance that would have resulted under different allocation strategies in Table 6 and for different average sizes of units in Table 7. The percentage components of variance, the design effects by stage of sampling and population variances between units of the various stages, as well as measures of homogeneity for households within stages, are derived and shown in Tables 2 to 5.

    The analysis was carried out for the Canadian Labour Force Survey, but the methodology of component of variance estimation (Gray [4]) and the methods used to analyze the results of a particular survey are readily applied to any multi-stage statistical sample survey, where Horvitz-Thompsen estimators and ratio estimation are applied.
    Release date: 1976-06-14

  • Articles and reports: 12-001-X197500254826
    Description: Exact formulae for bias and mean square error of an estimator of process average in single sampling with rectification for finite lots are obtained. Efficiency of the estimator as compared to an unbiased estimator based on the first sample is obtained for a number of values of lot size, sample size, acceptance number and process average used in sampling plans in quality control of data processing.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254827
    Description: In the Methods Test Panel Phase II it was required to do analysis of variance on proportions. Since such analysis gives only approximate results, two models were used in order to be able to draw safe conclusions. Analysis of variance was performed with the proportions as variable and also with the arc sine of the square root of the proportions. The two models are outlined in the present paper and empirical comparisons are made using the MTP Phase II data.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254828
    Description: The Canadian Travel Survey, 1971 was the largest survey on travel of Canadian residents. This paper describes some important aspects of the methodology. Particular emphasis is given to the development of definitions in relation to the methodology, the sampling technique and interview strategy.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254829
    Description: J.N.K. Rao (1975) derived a general formula for estimating the variance in multistage sample designs. This general formula extends the previous results by Des Raj (1966) to the case where the conditional variance from a given primary sampling unit is a random variable. The authors reviewed Rao's paper for its application to Horvitz-Thompson and Yates-Grundy variance estimators as well as the variance estimator for the random group method by Rao, Hartley and Cochran (1962). The authors present an altered version of the Yates-Grundy variance estimators as a result of Rao's paper.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254830
    Description: This paper focuses on the improvement of sample survey estimates in the particular situation where the survey sample, or part of it, is included in a larger sample from which auxiliary information is available. The properties of a method of estimation - sometimes applied in specific circumstances - are investigated and the limitations of its application are found. The application of the method to rotation designs in continuing surveys is more closely studied in the context of composite estimation.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254831
    Description: This paper summarizes the results of a telephone experiment conducted in conjunction with the Canadian Labour Force Survey over the period June 1972 to November 1973. Included in the paper is a detailed outline of the purpose and design of the experiment. A discussion of the impact telephone interviewing had on the cost of enumeration, non-response and participation and unemployment rates is given. In addition, interviewer and respondent attitudes toward telephone interviewing are described. Finally, the paper summarizes the experiences gained from this experiment and indicates some areas where further examinations related to telephone interviewing can be carried out.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500254832
    Description: A ratio estimate based on an auxiliary variable is considered for the case when the sample is post-stratified using information on another auxiliary variable. The variance of the ratio estimate is derived by the method of linearization [3,4]. An application to subprovincial estimation in the Canadian Labour Force Survey is discussed.
    Release date: 1975-12-15

  • Articles and reports: 12-001-X197500300001
    Description: Most sample surveys in the past have been "descriptive" in the sense that the main objective is the computation of means or totals of a number of characters of interest along with their standard errors. However, in recent years data produced from "descriptive" surveys are also being increasingly used for "analytical" purposes, i.e., for investigating relationships among variables. Also some sample surveys might have primary "analytical goals" in which case the "optimal" designing of such "analytical surveys" becomes important.

    These lecture notes present an account of some recent developments in the analytical studies of sample survey data. Many challenging problems remain to be solved and I hope these notes will provide stimulation for further research in this important area.
    Release date: 1975-12-15
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (1,590 to 1,600 of 2,038 results)

  • Surveys and statistical programs – Documentation: 4440
    Description: The main objective of the survey is to provide continual and reliable data on tobacco, alcohol and drug use and related issues, with the primary focus on 15 to 24 year olds.

  • Surveys and statistical programs – Documentation: 4441
    Description: The purpose of the Prince Edward Island Community Access Points Survey was to build a profile of general Internet use and to assess the level of interest for community access points to the Internet.

  • Surveys and statistical programs – Documentation: 4442
    Description: The primary objective of the Survey of Approaches to Educational Planning (SAEP) is to improve our understanding of the processes by which the parents/guardians of children aged 0-17 marshal the monetary and non-monetary resources needed to successfully pursue post-secondary education.

  • Surveys and statistical programs – Documentation: 4445
    Description: The Community Employment Innovation Project (CEIP) is a research demonstration project that is testing a new approach to the income security system for individuals on Employment Insurance (EI) or Income Assistance (IA). Individuals who agreed to take part in the study had a chance to be offered an opportunity to participate in community employment for three years. The CEIP is conducted in the Regional Municipality of Cape Breton, Nova Scotia.

  • Surveys and statistical programs – Documentation: 4446
    Description: The Post-Secondary Education Participation Survey was developed to provide basic indicators on access to post-secondary education, persistence in post-secondary education and post-secondary financing in order to assess the effectiveness and efficiency of Human Resources Development Canada's (HRDC) Harmonized Canada Student Loans Program.

  • Surveys and statistical programs – Documentation: 4449
    Description: The purpose of the survey is to obtain a profile of members of the compensation community in the Human Resources community of the federal public service.

  • Surveys and statistical programs – Documentation: 4450
    Description: The National Longitudinal Survey of Children and Youth (NLSCY) is a long-term study of Canadian children that follows their development and well-being from birth to early adulthood. The study is designed to collect information about factors influencing a child's social, emotional and behavioural development and to monitor the impact of these factors on the child's development over time.

  • Surveys and statistical programs – Documentation: 4500
    Description: The two primary objectives of the General Social Survey (GSS) are: to gather data on social trends in order to monitor changes in the living conditions and well being of Canadians over time; and to provide information on specific social policy issues of current or emerging interest. This survey monitored changes in education, work and retirement, and examined the relationships between these three main activities.

  • Surveys and statistical programs – Documentation: 4501
    Description: The two primary objectives of the General Social Survey (GSS) are: to gather data on social trends in order to monitor changes in the living conditions and well-being of Canadians over time; and to provide information on specific social policy issues of current or emerging interest.

  • Surveys and statistical programs – Documentation: 4502
    Description: The two primary objectives of the General Social Survey (GSS) are: to gather data on social trends in order to monitor changes in the living conditions and well being of Canadians over time; and to provide information on specific social policy issues of current or emerging interest. The purpose of this survey is to provide a snapshot of the lives of caregivers and care receivers in today's Canada.