Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (2,480 to 2,490 of 10,894 results)

  • Articles and reports: 12-001-X202100100004
    Description: Multiple data sources are becoming increasingly available for statistical analyses in the era of big data. As an important example in finite-population inference, we consider an imputation approach to combining data from a probability survey and big found data. We focus on the case when the study variable is observed in the big data only, but the other auxiliary variables are commonly observed in both data. Unlike the usual imputation for missing data analysis, we create imputed values for all units in the probability sample. Such mass imputation is attractive in the context of survey data integration (Kim and Rao, 2012). We extend mass imputation as a tool for data integration of survey data and big non-survey data. The mass imputation methods and their statistical properties are presented. The matching estimator of Rivers (2007) is also covered as a special case. Variance estimation with mass-imputed data is discussed. The simulation results demonstrate the proposed estimators outperform existing competitors in terms of robustness and efficiency.
    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100005
    Description:

    Bayesian pooling strategies are used to solve precision problems related to statistical analyses of data from small areas. In such cases, the subpopulation samples are usually small, even though the population might not be. As an alternative, similar data can be pooled in order to reduce the number of parameters in the model. Many surveys consist of categorical data on each area, collected into a contingency table. We consider hierarchical Bayesian pooling models with a Dirichlet process prior for analyzing categorical data based on small areas. However, the prior used to pool such data frequently results in an overshrinkage problem. To mitigate for this problem, the parameters are separated into global and local effects. This study focuses on data pooling using a Dirichlet process prior. We compare the pooling models using bone mineral density (BMD) data taken from the Third National Health and Nutrition Examination Survey for the period 1988 to 1994 in the United States. Our analyses of the BMD data are performed using a Gibbs sampler and slice sampling to carry out the posterior computations.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100006
    Description:

    It is now possible to manage surveys using statistical models and other tools that can be applied in real time. This paper focuses on three developments that reflect the attempt to take a more scientific approach to the management of survey field work: 1) the use of responsive and adaptive designs to reduce nonresponse bias, other sources of error, or costs; 2) optimal routing of interviewer travel to reduce costs; and 3) rapid feedback to interviewers to reduce measurement error. The article begins by reviewing experiments and simulation studies examining the effectiveness of responsive and adaptive designs. These studies suggest that these designs can produce modest gains in the representativeness of survey samples or modest cost savings, but can also backfire. The next section of the paper examines efforts to provide interviewers with a recommended route for their next trip to the field. The aim is to bring interviewers’ field work into closer alignment with research priorities while reducing travel time. However, a study testing this strategy found that interviewers often ignore such instructions. Then, the paper describes attempts to give rapid feedback to interviewers, based on automated recordings of their interviews. Interviewers often read questions in ways that affect respondents’ answers; correcting these problems quickly yielded marked improvements in data quality. All of the methods are efforts to replace the judgment of interviewers, field supervisors, and survey managers with statistical models and scientific findings.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100007
    Description:

    We consider the estimation of a small area mean under the basic unit-level model. The sum of the resulting model-dependent estimators may not add up to estimates obtained with a direct survey estimator that is deemed to be accurate for the union of these small areas. Benchmarking forces the model-based estimators to agree with the direct estimator at the aggregated area level. The generalized regression estimator is the direct estimator that we benchmark to. In this paper we compare small area benchmarked estimators based on four procedures. The first procedure produces benchmarked estimators by ratio adjustment. The second procedure is based on the empirical best linear unbiased estimator obtained under the unit-level model augmented with a suitable variable that ensures benchmarking. The third procedure uses pseudo-empirical estimators constructed with suitably chosen sampling weights so that, when aggregated, they agree with the reliable direct estimator for the larger area. The fourth procedure produces benchmarked estimators that are the result of a minimization problem subject to the constraint given by the benchmark condition. These benchmark procedures are applied to the small area estimators when the sampling rates are non-negligible. The resulting benchmarked estimators are compared in terms of relative bias and mean squared error using both a design-based simulation study as well as an example with real survey data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100008
    Description:

    Changes in the design of a repeated survey generally result in systematic effects in the sample estimates, which are further referred to as discontinuities. To avoid confounding real period-to-period change with the effects of a redesign, discontinuities are often quantified by conducting the old and the new design in parallel for some period of time. Sample sizes of such parallel runs are generally too small to apply direct estimators for domain discontinuities. A bivariate hierarchical Bayesian Fay-Herriot (FH) model is proposed to obtain more precise predictions for domain discontinuities and is applied to a redesign of the Dutch Crime Victimization Survey. This method is compared with a univariate FH model where the direct estimates under the regular approach are used as covariates in a FH model for the alternative approach conducted on a reduced sample size and a univariate FH model where the direct estimates for the discontinuities are modeled directly. An adjusted step forward selection procedure is proposed that minimizes the WAIC until the reduction of the WAIC is smaller than the standard error of this criteria. With this approach more parsimonious models are selected, which prevents selecting complex models that tend to overfit the data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100009
    Description: Predictive mean matching is a commonly used imputation procedure for addressing the problem of item nonresponse in surveys. The customary approach relies upon the specification of a single outcome regression model. In this note, we propose a novel predictive mean matching procedure that allows the user to specify multiple outcome regression models. The resulting estimator is multiply robust in the sense that it remains consistent if one of the specified outcome regression models is correctly specified. The results from a simulation study suggest that the proposed method performs well in terms of bias and efficiency.
    Release date: 2021-06-24

  • Stats in brief: 45-28-0001202100100027
    Description:

    The COVID-19 pandemic has significantly impacted the behaviours of Canadians, particularly regarding their online activities. Using data from the 2020 Canadian Internet Use Survey, this article examines several Internet-related activities Canadians have done more often during the pandemic.

    Release date: 2021-06-24

  • Stats in brief: 11-627-M2021041
    Description:

    This infographic features the pathways of registered apprentices across Canada. It presents the certification, continuation and discontinuation rates of registered apprentices over time as well as key results among 25 selected Red Seal trades, and 5 selected non-Red Seal trades.

    Release date: 2021-06-24

  • Articles and reports: 36-28-0001202100600001
    Description:

    This article provides an integrated summary of key changes in economic and labour market activity since the onset of the pandemic.

    Release date: 2021-06-23

  • Articles and reports: 36-28-0001202100600002
    Description: International students are increasingly viewed as a promising pool of skilled individuals who can be tapped for participation in the Canadian labour market. This is a key motivating factor for providing international students with pathways to obtain permanent residency. This article documents the share of international students who became landed immigrants across various sociodemographic characteristics.
    Release date: 2021-06-23
Reference (2,038)

Reference (2,038) (610 to 620 of 2,038 results)

  • Surveys and statistical programs – Documentation: 97-559-P2006003
    Description:

    This guide focuses on the following topics: Labour market activity and Unpaid work.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-08

  • Surveys and statistical programs – Documentation: 97-561-P2006003
    Description:

    This guide focuses on the following topic: Journey to work.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-08

  • Surveys and statistical programs – Documentation: 97-562-P
    Description: This guide focuses on the following demographic variables: Visible minority population and Population group.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-02

  • Surveys and statistical programs – Documentation: 97-562-P2006003
    Description:

    This guide focuses on the following demographic variables: Visible minority population and Population group.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-02

  • Surveys and statistical programs – Documentation: 97-562-P2006025
    Description:

    This guide focuses on the following demographic variable: Ethnic origin.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-04-02

  • Surveys and statistical programs – Documentation: 15-206-X2008016
    Description: This paper focuses on the role of investments in infrastructure in Canada. The size of infrastructure investments relative to other capital stock sets this country apart from most other Organisation for Economic Co-operation and Development countries. The paper reviews the approaches taken by other researchers to define infrastructure. It then outlines a taxonomy to define those assets that should be considered as infrastructure and that can be used to assess the importance of different types of capital investments. It briefly considers how to define the portion of infrastructure that should be considered 'public'. The final two parts of the paper apply the proposed classification system to data on Canada's capital stock, and ask the following questions: how much infrastructure does Canada have and in which sectors of the economy is this infrastructure located? Finally, the paper investigates how Canada's infrastructure has evolved over the last four decades, both in the commercial and non-commercial sectors, and compares these trends with the pattern that can be found in the United States.
    Release date: 2008-03-12

  • Surveys and statistical programs – Documentation: 97-556-G
    Description: These guides provide information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.
    Release date: 2008-03-05

  • Surveys and statistical programs – Documentation: 97-556-G2006003
    Description:

    This guide focuses on the following demographic variables: Mobility and migration.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2008-03-05

  • Surveys and statistical programs – Documentation: 75F0002M1992001
    Description: Starting in 1994, the Survey of Labour and Income Dynamics (SLID) will follow individuals and families for at least six years, tracking their labour market experiences, changes in income and family circumstances. An initial proposal for the content of SLID, entitled "Content of the Survey of Labour and Income Dynamics : Discussion Paper", was distributed in February 1992.

    That paper served as a background document for consultation with and a review by interested users. The content underwent significant change during this process. Based upon the revised content, a large-scale test of SLID will be conducted in February and May 1993.

    The present document outlines the income and wealth content to be tested in May 1993. This document is really a continuation of SLID Research Paper Series 92-01A, which outlines the demographic and labour content used in the January /February 1993 test.

    Release date: 2008-02-29

  • Surveys and statistical programs – Documentation: 75F0002M1992002
    Description:

    When a survey respondent is asked to recall various events, it is known that the quality of the responses diminishes as the length of recall increases. On the other hand, increasing the frequency of data collection increases both the costs of collection and the burden on the respondents. The paper examines options which attempt to strike a reasonable balance between these factors. As it relates to this decision, the paper also describes how the sample has been designed to ensure that it remains representative of the target population, both for a given year and over time.

    The conclusion is that, at this time, SLID should collect labour data in January to cover the previous calendar year and to collect income data in May, again to cover the previous calendar year.

    Release date: 2008-02-29