Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (1,590 to 1,600 of 13,366 results)

  • Table: 21-10-0033-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: The summary statistics by North American Industry Classification System (NAICS) which include: operating revenue (dollars x 1,000,000), operating expenses (dollars x 1,000,000), salaries wages and benefits (dollars x 1,000,000), and operating profit margin (by percent), of all NAICS under advertising, public relations, and related services (NAICS 5418), annual, for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0034-01
    Geography: Canada
    Frequency: Annual
    Description: The operating expenses by North American Industry Classification System (NAICS) which include all members under industry expenditures, for advertising and related services, annual (percent), for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0035-01
    Geography: Canada
    Frequency: Annual
    Description: The sales by type of client based on the North American Industry Classification System (NAICS) which includes all members under type of client, for advertising and related services, annual (percent), for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0231-01
    Geography: Canada
    Frequency: Annual
    Description:

    E-commerce sales for North American Industry Classification System (NAICS) Advertising, public relations, and related services, includes all members under sales, for Canada, for one year of data.

    Release date: 2026-03-27

  • Table: 32-10-0136-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Farm operating revenues and expenses for all farm types and revenue classes, available on an annual basis.
    Release date: 2026-03-27

  • Table: 42-10-0101-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Occasional
    Description: Official language of daycare and reasons for attending, by elementary school language and type of program, age group and gender, for Canada, Quebec, Canada outside Quebec, by provinces and select regions, among sub-populations of children in a minority official language situation, 2022.
    Release date: 2026-03-27

  • Table: 42-10-0102-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Occasional
    Description: Preference for daycare in the minority official language, by elementary school language and type of program, age group and gender, for Canada, Quebec, Canada outside Quebec, by provinces and select regions, among sub-populations of children in a minority official language situation, 2022.
    Release date: 2026-03-27

  • Table: 14-10-0202-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Number of employees by North American Industry Classification System (NAICS) and type of employee, last 5 years.
    Release date: 2026-03-26

  • Table: 14-10-0204-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Average weekly earnings by North American Industry Classification System (NAICS), type of employee and overtime status, last 5 years.
    Release date: 2026-03-26

  • Table: 14-10-0206-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Average hourly earnings for employees paid by the hour, by North American Industry Classification System (NAICS) and overtime status, last 5 years.
    Release date: 2026-03-26
Analysis (10,894)

Analysis (10,894) (2,480 to 2,490 of 10,894 results)

  • Articles and reports: 12-001-X202100100004
    Description: Multiple data sources are becoming increasingly available for statistical analyses in the era of big data. As an important example in finite-population inference, we consider an imputation approach to combining data from a probability survey and big found data. We focus on the case when the study variable is observed in the big data only, but the other auxiliary variables are commonly observed in both data. Unlike the usual imputation for missing data analysis, we create imputed values for all units in the probability sample. Such mass imputation is attractive in the context of survey data integration (Kim and Rao, 2012). We extend mass imputation as a tool for data integration of survey data and big non-survey data. The mass imputation methods and their statistical properties are presented. The matching estimator of Rivers (2007) is also covered as a special case. Variance estimation with mass-imputed data is discussed. The simulation results demonstrate the proposed estimators outperform existing competitors in terms of robustness and efficiency.
    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100005
    Description:

    Bayesian pooling strategies are used to solve precision problems related to statistical analyses of data from small areas. In such cases, the subpopulation samples are usually small, even though the population might not be. As an alternative, similar data can be pooled in order to reduce the number of parameters in the model. Many surveys consist of categorical data on each area, collected into a contingency table. We consider hierarchical Bayesian pooling models with a Dirichlet process prior for analyzing categorical data based on small areas. However, the prior used to pool such data frequently results in an overshrinkage problem. To mitigate for this problem, the parameters are separated into global and local effects. This study focuses on data pooling using a Dirichlet process prior. We compare the pooling models using bone mineral density (BMD) data taken from the Third National Health and Nutrition Examination Survey for the period 1988 to 1994 in the United States. Our analyses of the BMD data are performed using a Gibbs sampler and slice sampling to carry out the posterior computations.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100006
    Description:

    It is now possible to manage surveys using statistical models and other tools that can be applied in real time. This paper focuses on three developments that reflect the attempt to take a more scientific approach to the management of survey field work: 1) the use of responsive and adaptive designs to reduce nonresponse bias, other sources of error, or costs; 2) optimal routing of interviewer travel to reduce costs; and 3) rapid feedback to interviewers to reduce measurement error. The article begins by reviewing experiments and simulation studies examining the effectiveness of responsive and adaptive designs. These studies suggest that these designs can produce modest gains in the representativeness of survey samples or modest cost savings, but can also backfire. The next section of the paper examines efforts to provide interviewers with a recommended route for their next trip to the field. The aim is to bring interviewers’ field work into closer alignment with research priorities while reducing travel time. However, a study testing this strategy found that interviewers often ignore such instructions. Then, the paper describes attempts to give rapid feedback to interviewers, based on automated recordings of their interviews. Interviewers often read questions in ways that affect respondents’ answers; correcting these problems quickly yielded marked improvements in data quality. All of the methods are efforts to replace the judgment of interviewers, field supervisors, and survey managers with statistical models and scientific findings.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100007
    Description:

    We consider the estimation of a small area mean under the basic unit-level model. The sum of the resulting model-dependent estimators may not add up to estimates obtained with a direct survey estimator that is deemed to be accurate for the union of these small areas. Benchmarking forces the model-based estimators to agree with the direct estimator at the aggregated area level. The generalized regression estimator is the direct estimator that we benchmark to. In this paper we compare small area benchmarked estimators based on four procedures. The first procedure produces benchmarked estimators by ratio adjustment. The second procedure is based on the empirical best linear unbiased estimator obtained under the unit-level model augmented with a suitable variable that ensures benchmarking. The third procedure uses pseudo-empirical estimators constructed with suitably chosen sampling weights so that, when aggregated, they agree with the reliable direct estimator for the larger area. The fourth procedure produces benchmarked estimators that are the result of a minimization problem subject to the constraint given by the benchmark condition. These benchmark procedures are applied to the small area estimators when the sampling rates are non-negligible. The resulting benchmarked estimators are compared in terms of relative bias and mean squared error using both a design-based simulation study as well as an example with real survey data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100008
    Description:

    Changes in the design of a repeated survey generally result in systematic effects in the sample estimates, which are further referred to as discontinuities. To avoid confounding real period-to-period change with the effects of a redesign, discontinuities are often quantified by conducting the old and the new design in parallel for some period of time. Sample sizes of such parallel runs are generally too small to apply direct estimators for domain discontinuities. A bivariate hierarchical Bayesian Fay-Herriot (FH) model is proposed to obtain more precise predictions for domain discontinuities and is applied to a redesign of the Dutch Crime Victimization Survey. This method is compared with a univariate FH model where the direct estimates under the regular approach are used as covariates in a FH model for the alternative approach conducted on a reduced sample size and a univariate FH model where the direct estimates for the discontinuities are modeled directly. An adjusted step forward selection procedure is proposed that minimizes the WAIC until the reduction of the WAIC is smaller than the standard error of this criteria. With this approach more parsimonious models are selected, which prevents selecting complex models that tend to overfit the data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100009
    Description: Predictive mean matching is a commonly used imputation procedure for addressing the problem of item nonresponse in surveys. The customary approach relies upon the specification of a single outcome regression model. In this note, we propose a novel predictive mean matching procedure that allows the user to specify multiple outcome regression models. The resulting estimator is multiply robust in the sense that it remains consistent if one of the specified outcome regression models is correctly specified. The results from a simulation study suggest that the proposed method performs well in terms of bias and efficiency.
    Release date: 2021-06-24

  • Stats in brief: 45-28-0001202100100027
    Description:

    The COVID-19 pandemic has significantly impacted the behaviours of Canadians, particularly regarding their online activities. Using data from the 2020 Canadian Internet Use Survey, this article examines several Internet-related activities Canadians have done more often during the pandemic.

    Release date: 2021-06-24

  • Stats in brief: 11-627-M2021041
    Description:

    This infographic features the pathways of registered apprentices across Canada. It presents the certification, continuation and discontinuation rates of registered apprentices over time as well as key results among 25 selected Red Seal trades, and 5 selected non-Red Seal trades.

    Release date: 2021-06-24

  • Articles and reports: 36-28-0001202100600001
    Description:

    This article provides an integrated summary of key changes in economic and labour market activity since the onset of the pandemic.

    Release date: 2021-06-23

  • Articles and reports: 36-28-0001202100600002
    Description: International students are increasingly viewed as a promising pool of skilled individuals who can be tapped for participation in the Canadian labour market. This is a key motivating factor for providing international students with pathways to obtain permanent residency. This article documents the share of international students who became landed immigrants across various sociodemographic characteristics.
    Release date: 2021-06-23
Reference (2,038)

Reference (2,038) (750 to 760 of 2,038 results)

  • Surveys and statistical programs – Documentation: 81-005-X
    Description:

    This register identifies the universe of all public and not-for-profit postsecondary and adult education institutions in Canada and their programs of study. All programs are classified to the Classification of Instructional Programs (CIP).

    Release date: 2004-12-13

  • Surveys and statistical programs – Documentation: 62F0026M2004003
    Geography: Province or territory
    Description:

    This guide presents information of interest to users of data from the Survey of Household Spending, which gathers information on the spending habits, dwelling characteristics and household equipment of Canadian households.

    This guide includes definitions of survey terms and variables, as well as descriptions of survey methodology and data quality. One section describes the statistics that can be created using expenditure data (e.g., budget share, market share and aggregates).

    Release date: 2004-12-13

  • Surveys and statistical programs – Documentation: 62F0026M2004002
    Description:

    This report reviews the concepts measured and estimates produced by the Survey of Household Spending (SHS), previously called the Family Expenditure Survey (FAMEX), and the Homeowner Repair and Renovation Survey (HRRS).

    Release date: 2004-11-30

  • Surveys and statistical programs – Documentation: 92-394-X
    Description:

    This report deals with coverage errors that occur when persons, households, dwellings or families are missed or enumerated in error by the census. After the 2001 Census was taken, a number of studies were carried out to estimate gross undercoverage, gross overcoverage and net undercoverage. This report presents the results of the Dwelling Classification Study, the Reverse Record Check Study, the Automated Match Study and the Collective Dwelling Study. The report first describes census universes, coverage error and census collection and processing procedures that may result in coverage error. Then it gives estimates of net undercoverage for a number of demographic characteristics. After, the technical report presents the methodology and results of each coverage study and the estimates of coverage error after describing how the results of the various studies are combined. A historical perspective completes the product.

    Release date: 2004-11-25

  • Surveys and statistical programs – Documentation: 92-392-G
    Description:

    This guide presents the census concepts related to schooling and major field of study and describes the evolution of the different issues that concern these concepts. The guide also deals with the comparability of the 2001 Census data on schooling and major field of study with those of previous censuses.

    Release date: 2004-11-23

  • Surveys and statistical programs – Documentation: 96-328-M2004015
    Description:

    This activity focusses on the increase in potato production in Western Canada. It discusses how scientists and growers are discovering that soil and climate conditions in Western Canada are well suited to growing potatoes.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004016
    Geography: Canada
    Description:

    This activity looks at how Canada's grape industry has transformed itself in the wake of the Canada-U.S. Free Trade Agreement.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004017
    Description:

    This activity focusses on the concept of sustainability as it applies to agriculture. To fully understand the concept of sustainability, we need to understand all aspects of it: environmental, economic and social sustainability.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004018
    Description:

    This activity looks at all aspects of organic farming, helping students to understand what 'organic' really means.

    Release date: 2004-10-29

  • Surveys and statistical programs – Documentation: 96-328-M2004019
    Description:

    This activity focusses on changes in the way in which fruit and vegetable producers are selling their produce. Using the pumpkin industry as a case study, it examines the agri-tourism trend.

    Release date: 2004-10-29