Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (2,230 to 2,240 of 10,894 results)

  • Articles and reports: 12-001-X202100200001
    Description:

    The Fay-Herriot model is often used to produce small area estimates. These estimates are generally more efficient than standard direct estimates. In order to evaluate the efficiency gains obtained by small area estimation methods, model mean square error estimates are usually produced. However, these estimates do not reflect all the peculiarities of a given domain (or area) because model mean square errors integrate out the local effects. An alternative is to estimate the design mean square error of small area estimators, which is often more attractive from a user point of view. However, it is known that design mean square error estimates can be very unstable, especially for domains with few sampled units. In this paper, we propose two local diagnostics that aim to choose between the empirical best predictor and the direct estimator for a particular domain. We first find an interval for the local effect such that the best predictor is more efficient under the design than the direct estimator. Then, we consider two different approaches to assess whether it is plausible that the local effect falls in this interval. We evaluate our diagnostics using a simulation study. Our preliminary results indicate that our diagnostics are effective for choosing between the empirical best predictor and the direct estimator.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200002
    Description:

    When linking massive data sets, blocking is used to select a manageable subset of record pairs at the expense of losing a few matched pairs. This loss is an important component of the overall linkage error, because blocking decisions are made early on in the linkage process, with no way to revise them in subsequent steps. Yet, measuring this contribution is still a major challenge because of the need to model all the pairs in the Cartesian product of the sources, not just those satisfying the blocking criteria. Unfortunately, previous error models are of little use because they typically do not meet this requirement. This paper addresses the issue with a new finite mixture model, which dispenses with clerical reviews, training data, or the assumption that the linkage variables are conditionally independent. It applies when applying a standard blocking procedure for the linkage of a file to a register or a census with complete coverage, where both sources are free of duplicate records.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200003
    Description:

    Calibration weighting is a statistically efficient way for handling unit nonresponse. Assuming the response (or output) model justifying the calibration-weight adjustment is correct, it is often possible to measure the variance of estimates in an asymptotically unbiased manner. One approach to variance estimation is to create jackknife replicate weights. Sometimes, however, the conventional method for computing jackknife replicate weights for calibrated analysis weights fails. In that case, an alternative method for computing jackknife replicate weights is usually available. That method is described here and then applied to a simple example.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200004
    Description:

    This note presents a comparative study of three methods for constructing confidence intervals for the mean and quantiles based on survey data with nonresponse. These methods, empirical likelihood, linearization, and that of Woodruff’s (1952), were applied to data on income obtained from the 2015 Mexican Intercensal Survey, and to simulated data. A response propensity model was used for adjusting the sampling weights, and the empirical performance of the methods was assessed in terms of the coverage of the confidence intervals through simulation studies. The empirical likelihood and linearization methods had a good performance for the mean, except when the variable of interest had some extreme values. For quantiles, the linearization method had a poor performance, while the empirical likelihood and Woodruff methods had a better one, though without reaching the nominal coverage when the variable of interest had values with high frequency near the quantile of interest.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200005
    Description:

    Variance estimation is a challenging problem in surveys because there are several nontrivial factors contributing to the total survey error, including sampling and unit non-response. Initially devised to capture the variance of non-trivial statistics based on independent and identically distributed data, the bootstrap method has since been adapted in various ways to address survey-specific elements/factors. In this paper we look into one of those variants, the with-replacement bootstrap. We consider household surveys, with or without sub-sampling of individuals. We make explicit the benchmark variance estimators that the with-replacement bootstrap aims at reproducing. We explain how the bootstrap can be used to account for the impact sampling, treatment of non-response and calibration have on total survey error. For clarity, the proposed methods are illustrated on a running example. They are evaluated through a simulation study, and applied to a French Panel for Urban Policy. Two SAS macros to perform the bootstrap methods are also developed.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200006
    Description:

    Sample-based calibration occurs when the weights of a survey are calibrated to control totals that are random, instead of representing fixed population-level totals. Control totals may be estimated from different phases of the same survey or from another survey. Under sample-based calibration, valid variance estimation requires that the error contribution due to estimating the control totals be accounted for. We propose a new variance estimation method that directly uses the replicate weights from two surveys, one survey being used to provide control totals for calibration of the other survey weights. No restrictions are set on the nature of the two replication methods and no variance-covariance estimates need to be computed, making the proposed method straightforward to implement in practice. A general description of the method for surveys with two arbitrary replication methods with different numbers of replicates is provided. It is shown that the resulting variance estimator is consistent for the asymptotic variance of the calibrated estimator, when calibration is done using regression estimation or raking. The method is illustrated in a real-world application, in which the demographic composition of two surveys needs to be harmonized to improve the comparability of the survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200007
    Description:

    In this paper, we consider the Fay-Herriot model for small area estimation. In particular, we are interested in the impact of sampling variance smoothing and modeling on the model-based estimates. We present methods of smoothing and modeling for the sampling variances and apply the proposed models to a real data analysis. Our results indicate that sampling variance smoothing can improve the efficiency and accuracy of the model-based estimator. For sampling variance modeling, the HB models of You (2016) and Sugasawa, Tamae and Kubokawa (2017) perform equally well to improve the direct survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200008
    Description:

    Multiple-frame surveys, in which independent probability samples are selected from each of Q sampling frames, have long been used to improve coverage, to reduce costs, or to increase sample sizes for subpopulations of interest. Much of the theory has been developed assuming that (1) the union of the frames covers the population of interest, (2) a full-response probability sample is selected from each frame, (3) the variables of interest are measured in each sample with no measurement error, and (4) sufficient information exists to account for frame overlap when computing estimates. After reviewing design, estimation, and calibration for traditional multiple-frame surveys, I consider modifications of the assumptions that allow a multiple-frame structure to serve as an organizing principle for other data combination methods such as mass imputation, sample matching, small area estimation, and capture-recapture estimation. Finally, I discuss how results from multiple-frame survey research can be used when designing and evaluating data collection systems that integrate multiple sources of data.

    Release date: 2022-01-06

  • Stats in brief: 45-28-0001202100100043
    Description:

    With the proportion of small businesses making up nearly all of the employer businesses in Canada, small businesses are an important role in employing Canadians and are a significant driver towards economic recovery. This article provides insights on the expectations of small businesses as well as the specific realities faced by these businesses in the fourth quarter of 2021. It involves an examination of the data produced by the Canadian Survey on Business Conditions.

    Release date: 2022-01-06

  • Articles and reports: 46-28-0001202200100001
    Description:

    When a survey publishes statistics with a quality indicator, it is usually derived from measures based on sampling theory. The production of quality indicators is a significant challenge when statistics are produced using alternative sources for which no sampling is done. This paper describes a new method used to create a quality indicator that combines indicators obtained at different stages of data processing. An example of the application of the method in the Canadian Housing Statistics Program is provided in the Appendix.

    Release date: 2022-01-06
Reference (2,038)

Reference (2,038) (930 to 940 of 2,038 results)

  • Surveys and statistical programs – Documentation: 13F0031M2001008
    Description:

    Under any degree of inflation, high or low, the values of changes in inventories (VPC) is generally different when it is calculated at the quarterly interval and the four quarters are aggregated into a year compared with its calculation done at the yearly interval. It is argued in this paper that it is an inherent problem as one of the basic axioms of annual accounts is violated, namely, the assumption of price homogeneity over an accounting period.

    Release date: 2001-03-16

  • Notices and consultations: 87-004-X20000035566
    Geography: Canada
    Description:

    As with many other areas in Statistics Canada, the Culture Statistics Program (CSP) benefits from the informed advice of an external advisory committee. The National Advisory Committee on Culture Statistics (NACCS) was created in 1984 with a mandate to provide advice for the development of statistical activities related to all aspects of art and culture in Canada.

    Release date: 2001-03-16

  • Notices and consultations: 88-003-X20010015591
    Geography: Canada
    Description:

    The Quebec Institute of Statistics hosted a forum for Statistics Canada and provincial government experts dealing with the subject of science and technology statistics.

    Release date: 2001-03-13

  • Surveys and statistical programs – Documentation: 11-008-X20000045556
    Geography: Canada
    Description:

    This article provides information about the census and how the data gathered are used.

    Release date: 2001-03-12

  • Notices and consultations: 12-001-X20000025530
    Description:

    Reflection on professor Leslie Kish's life and contributions to statistics. Some of the most significant books he wrote and statistical subjects he worked on are mentioned.

    Release date: 2001-02-28

  • Surveys and statistical programs – Documentation: 75F0002M2001001
    Description:

    This user's guide provides a detailed description of the CD-ROM Income trends in Canada (13F0022XCB). It also provides a glossary, a description of the major concepts as well as an overview of the data source, the Survey of Labour and Income Dynamics (SLID).

    Release date: 2001-02-21

  • Surveys and statistical programs – Documentation: 13-594-G
    Description: This guide provides indicators that are used to monitor supply, demand and employment for tourism in Canada on a timely basis. The guide provides information on the methods used to derive the supply, demand and employment indicators. It also provides information on the seasonal adjustment method and the derivation of constant dollar series. This guide was commissioned by the Canadian Tourism Commission (CTC), following a pilot project providing quarterly and annual updates for the Tourism Satellite Account (TSA 1988).
    Release date: 2001-02-21

  • Surveys and statistical programs – Documentation: 15F0077G
    Description:

    This publication provides a description of the data sources and methods used to compile the input-output tables at constant prices. It includes a brief description of the accounting framework, an overview of the methods used for the major components of the tables and an outline of the techniques applied to each group of goods and services. It also distinguishes between the derivation of the gross domestic product by industry for the business sector and that of the non-business sector. Finally, it discusses some of the critical contemporary issues that are being addressed at the time of writing.

    Release date: 2001-02-15

  • Surveys and statistical programs – Documentation: 13F0026M2001002
    Description:

    The Survey of Financial Security (SFS) will provide information on the net worth of Canadians. In order to do this, information was collected - in May and June 1999 - on the value of the assets and debts of each of the families or unattached individuals in the sample. The value of one particular asset is not easy to determine, or to estimate. That is the present value of the amount people have accrued in their employer pension plan. These plans are often called registered pension plans (RPP), as they must be registered with Canada Customs and Revenue Agency. Although some RPP members receive estimates of the value of their accrued benefit, in most cases plan members would not know this amount. However, it is likely to be one of the largest assets for many family units. And, as the baby boomers approach retirement, information on their pension accumulations is much needed to better understand their financial readiness for this transition.

    The intent of this paper is to: present, for discussion, a methodology for estimating the present value of employer pension plan benefits for the Survey of Financial Security; and to seek feedback on the proposed methodology. This document proposes a methodology for estimating the value of employer pension plan benefits for the following groups:a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.

    Release date: 2001-02-07

  • Notices and consultations: 63F0022X
    Description: Statistics Canada's annual retail trade surveys are undergoing changes. Two activities underlie these changes. The re-design of our annual retail trade questionnaires is one. The other is the conversion from the 1980 Standard Industrial Classification (1980 SIC) to the North American Industrial Classification System (NAICS). These activities will have significant impacts on the output of the annual surveys.

    This paper has two goals. The first is to inform retail store data users, industry analysts, trade associations and other stakeholders about these changes. The second is to consult with stakeholders on possible data outputs resulting from the changes.

    The paper is organized into five parts. Following the introduction, Part II describes the outputs from the current surveys and compares and contrasts the current outputs with the new. Part III focuses on the introduction of NAICS codes and the changes in coverage for retail trade. In Part IV, the benefits resulting from the above changes are outlined. The final part (Part V) seeks comments or suggestions from data users, retail trade associations and industry specialists on the release of data products as a result of the changes to the surveys.

    Release date: 2001-02-01