Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (2,230 to 2,240 of 10,894 results)

  • Articles and reports: 12-001-X202100200001
    Description:

    The Fay-Herriot model is often used to produce small area estimates. These estimates are generally more efficient than standard direct estimates. In order to evaluate the efficiency gains obtained by small area estimation methods, model mean square error estimates are usually produced. However, these estimates do not reflect all the peculiarities of a given domain (or area) because model mean square errors integrate out the local effects. An alternative is to estimate the design mean square error of small area estimators, which is often more attractive from a user point of view. However, it is known that design mean square error estimates can be very unstable, especially for domains with few sampled units. In this paper, we propose two local diagnostics that aim to choose between the empirical best predictor and the direct estimator for a particular domain. We first find an interval for the local effect such that the best predictor is more efficient under the design than the direct estimator. Then, we consider two different approaches to assess whether it is plausible that the local effect falls in this interval. We evaluate our diagnostics using a simulation study. Our preliminary results indicate that our diagnostics are effective for choosing between the empirical best predictor and the direct estimator.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200002
    Description:

    When linking massive data sets, blocking is used to select a manageable subset of record pairs at the expense of losing a few matched pairs. This loss is an important component of the overall linkage error, because blocking decisions are made early on in the linkage process, with no way to revise them in subsequent steps. Yet, measuring this contribution is still a major challenge because of the need to model all the pairs in the Cartesian product of the sources, not just those satisfying the blocking criteria. Unfortunately, previous error models are of little use because they typically do not meet this requirement. This paper addresses the issue with a new finite mixture model, which dispenses with clerical reviews, training data, or the assumption that the linkage variables are conditionally independent. It applies when applying a standard blocking procedure for the linkage of a file to a register or a census with complete coverage, where both sources are free of duplicate records.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200003
    Description:

    Calibration weighting is a statistically efficient way for handling unit nonresponse. Assuming the response (or output) model justifying the calibration-weight adjustment is correct, it is often possible to measure the variance of estimates in an asymptotically unbiased manner. One approach to variance estimation is to create jackknife replicate weights. Sometimes, however, the conventional method for computing jackknife replicate weights for calibrated analysis weights fails. In that case, an alternative method for computing jackknife replicate weights is usually available. That method is described here and then applied to a simple example.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200004
    Description:

    This note presents a comparative study of three methods for constructing confidence intervals for the mean and quantiles based on survey data with nonresponse. These methods, empirical likelihood, linearization, and that of Woodruff’s (1952), were applied to data on income obtained from the 2015 Mexican Intercensal Survey, and to simulated data. A response propensity model was used for adjusting the sampling weights, and the empirical performance of the methods was assessed in terms of the coverage of the confidence intervals through simulation studies. The empirical likelihood and linearization methods had a good performance for the mean, except when the variable of interest had some extreme values. For quantiles, the linearization method had a poor performance, while the empirical likelihood and Woodruff methods had a better one, though without reaching the nominal coverage when the variable of interest had values with high frequency near the quantile of interest.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200005
    Description:

    Variance estimation is a challenging problem in surveys because there are several nontrivial factors contributing to the total survey error, including sampling and unit non-response. Initially devised to capture the variance of non-trivial statistics based on independent and identically distributed data, the bootstrap method has since been adapted in various ways to address survey-specific elements/factors. In this paper we look into one of those variants, the with-replacement bootstrap. We consider household surveys, with or without sub-sampling of individuals. We make explicit the benchmark variance estimators that the with-replacement bootstrap aims at reproducing. We explain how the bootstrap can be used to account for the impact sampling, treatment of non-response and calibration have on total survey error. For clarity, the proposed methods are illustrated on a running example. They are evaluated through a simulation study, and applied to a French Panel for Urban Policy. Two SAS macros to perform the bootstrap methods are also developed.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200006
    Description:

    Sample-based calibration occurs when the weights of a survey are calibrated to control totals that are random, instead of representing fixed population-level totals. Control totals may be estimated from different phases of the same survey or from another survey. Under sample-based calibration, valid variance estimation requires that the error contribution due to estimating the control totals be accounted for. We propose a new variance estimation method that directly uses the replicate weights from two surveys, one survey being used to provide control totals for calibration of the other survey weights. No restrictions are set on the nature of the two replication methods and no variance-covariance estimates need to be computed, making the proposed method straightforward to implement in practice. A general description of the method for surveys with two arbitrary replication methods with different numbers of replicates is provided. It is shown that the resulting variance estimator is consistent for the asymptotic variance of the calibrated estimator, when calibration is done using regression estimation or raking. The method is illustrated in a real-world application, in which the demographic composition of two surveys needs to be harmonized to improve the comparability of the survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200007
    Description:

    In this paper, we consider the Fay-Herriot model for small area estimation. In particular, we are interested in the impact of sampling variance smoothing and modeling on the model-based estimates. We present methods of smoothing and modeling for the sampling variances and apply the proposed models to a real data analysis. Our results indicate that sampling variance smoothing can improve the efficiency and accuracy of the model-based estimator. For sampling variance modeling, the HB models of You (2016) and Sugasawa, Tamae and Kubokawa (2017) perform equally well to improve the direct survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200008
    Description:

    Multiple-frame surveys, in which independent probability samples are selected from each of Q sampling frames, have long been used to improve coverage, to reduce costs, or to increase sample sizes for subpopulations of interest. Much of the theory has been developed assuming that (1) the union of the frames covers the population of interest, (2) a full-response probability sample is selected from each frame, (3) the variables of interest are measured in each sample with no measurement error, and (4) sufficient information exists to account for frame overlap when computing estimates. After reviewing design, estimation, and calibration for traditional multiple-frame surveys, I consider modifications of the assumptions that allow a multiple-frame structure to serve as an organizing principle for other data combination methods such as mass imputation, sample matching, small area estimation, and capture-recapture estimation. Finally, I discuss how results from multiple-frame survey research can be used when designing and evaluating data collection systems that integrate multiple sources of data.

    Release date: 2022-01-06

  • Stats in brief: 45-28-0001202100100043
    Description:

    With the proportion of small businesses making up nearly all of the employer businesses in Canada, small businesses are an important role in employing Canadians and are a significant driver towards economic recovery. This article provides insights on the expectations of small businesses as well as the specific realities faced by these businesses in the fourth quarter of 2021. It involves an examination of the data produced by the Canadian Survey on Business Conditions.

    Release date: 2022-01-06

  • Articles and reports: 46-28-0001202200100001
    Description:

    When a survey publishes statistics with a quality indicator, it is usually derived from measures based on sampling theory. The production of quality indicators is a significant challenge when statistics are produced using alternative sources for which no sampling is done. This paper describes a new method used to create a quality indicator that combines indicators obtained at different stages of data processing. An example of the application of the method in the Canadian Housing Statistics Program is provided in the Appendix.

    Release date: 2022-01-06
Reference (2,038)

Reference (2,038) (220 to 230 of 2,038 results)

  • Surveys and statistical programs – Documentation: 98-20-00032021004
    Description: This video is one of a series of videos related to census geography in the context of the activities of the 2021 Census and previous censuses. The objective of this video is to help users at all levels quickly understand key information derived from data with the help of powerful and dynamic tools like GeoSuite, GeoSearch and the Census Program Data Viewer.
    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 98-20-00032021005
    Description: This video is designed to provide viewers with a basic understanding of how census concepts (e.g., focuses, population of interest and variables) are logically structured and to show different ways of looking at data. The knowledge of these concepts is used when analyzing or creating census data products.
    Release date: 2022-02-09

  • Geographic files and documentation: 12-571-X
    Description: The Standard Geographical Classification (SGC) provides a systematic structure for classifying Canada's geographic areas. It is the official classification system used for the Census of Population and other Statistics Canada surveys.

    The classification is presented in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume I describes the classification and related standard geographic areas and place names. It presents the names and codes for the geographical regions of Canada, provinces and territories, census divisions and census subdivisions, as well as those of the geographic regions that make up the different variants of the classification. It provides information on changes between the current version of the SGC and the previous one, including changes in name, type or code, and indicates the correspondence between the new and old codes. Volume II contains reference maps.

    Volume II. Reference Maps is available (12-572-X).
    Release date: 2022-02-09

  • Geographic files and documentation: 12-572-X
    Description: The Standard Geographical Classification (SGC) provides a systematic classification structure that categorizes all of the geographic area of Canada. The SGC is the official classification used in the Census of Population and other Statistics Canada surveys.

    The classification is organized in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume II contains reference maps showing boundaries, names, codes and locations of the geographic areas in the classification. The reference maps show census subdivisions, census divisions, census metropolitan areas, census agglomerations, census metropolitan influenced zones and economic regions. Definitions for these terms are found in Volume I, The Classification. Volume I describes the classification and related standard geographic areas and place names.

    The maps in Volume II can be downloaded in PDF format from our website.

    Release date: 2022-02-09

  • Geographic files and documentation: 92-142-X
    Description: This interactive mapping application facilitates the search and visualization of geographic regions in Canada for which Census of Population data are available. GeoSearch also displays geographic regions related to the selected region, as well as links to census data products, analytical products, and maps associated with that region.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-143-G
    Description: This guide describes the content and applications of the product, as well as providing information on data quality, record layouts, and methodology.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-146-X
    Description:

    The Census Tract Reference Maps, by Census Metropolitan Areas or Census Agglomerations cover all census metropolitan areas and the census agglomerations in the census tract program. The maps display boundaries and names of census tracts and census subdivisions, designated places and their names, as well as core, secondary core, fringe and rural areas within census metropolitan areas or census agglomerations. Inset maps are available to show detail for the more concentrated areas. The maps also display street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size. Embedded links enable users to link to respective dissemination area by census tract maps when viewing the maps on the Internet.

    A reference guide is available (92-143-G).

    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 92-150-G
    Description: his reference guide is intended for users of the GeoSuite data package available in the Census of Population GeoSuite (92-150-X). It provides an overview of the general methodology used to create this dataset, as well as important technical information.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-150-X
    Description: GeoSuite is a powerful interactive search tool based on Census of Population geographic areas. It allows users to search and retrieve data, explore and obtain information about geographic areas, and produce data tables. The information available includes the population and dwelling counts from the 2006 census to the most recent, as well as representative point coordinates, land area, geographic codes, and names.

    A reference guide is available (GeoSuite Data Package, Reference Guide, 92-150-G).
    Release date: 2022-02-09

  • Geographic files and documentation: 92-151-G
    Description:

    The reference guide provides an overview of the Geographic Attribute File product, including the general methodology used to create it.

    Release date: 2022-02-09