Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (200 to 210 of 13,366 results)

  • Table: 24-10-0056-01
    Frequency: Daily
    Description:

    The table is part of Frontier Counts. The data comes from the Primary Inspections Kiosks (PIK), from the Canada Border Services Agency (CBSA). Keywords include: airport, arrival, entry, excursionist, overnight, plane, port of entry, same-day, tourism, tourist, travel and visit.

    Release date: 2026-11-12

  • Table: 24-10-0057-01
    Geography: Canada, Province or territory
    Frequency: Daily
    Description: The table is part of Frontier Counts. The data comes from the Integrated Primary Inspection Line (IPIL) and NEXUS Highway, from the Canada Border Services Agency (CBSA). Keywords include: arrival, automobile, car, entry, excursionist, motorcycle, overnight, port of entry, same-day, tourism, tourist, travel and visit.
    Release date: 2026-11-12

  • Table: 24-10-0058-01
    Geography: Canada, Province or territory
    Frequency: Daily
    Description: The table is part of Frontier Counts. The data comes from the Integrated Primary Inspection Line (IPIL) and NEXUS Highway, from the Canada Border Services Agency (CBSA). Keywords include: arrival, automobile, car, entry, excursionist, motorcycle, overnight, port of entry, same-day, tourism, tourist, travel and visit.
    Release date: 2026-11-12

  • Table: 24-10-0059-01
    Geography: Canada, Province or territory
    Frequency: Daily
    Description:

    The table is part of Frontier Counts. The data comes from the Integrated Primary Inspection Line (IPIL), from the Canada Border Services Agency (CBSA). Keywords include: arrival, crew, entry, international, port of entry, tourism, travel, traveller, visit and visitor.

    Release date: 2026-11-12

  • Data Visualization: 71-607-X2021005
    Description: Building permits: Interactive Dashboard can be used to visualize monthly data or trend analysis of the value of permits issued by Canadian municipalities as well as monthly changes on residential units created. The user can view those data by selecting reference period, geography, type of building structure and value type for seasonal adjustment.
    Release date: 2026-11-12

  • Data Visualization: 71-607-X2021006
    Description: This interactive data visualization provides an overview of employment in rural Canada. The dashboard allows users to compare employment in different industries. Data can be visualized for Canada or for a selected province.
    Release date: 2026-11-12

  • Data Visualization: 71-607-X2023020
    Description: The "Frontier Counts: Interactive Dashboard" provides access to data on the number of border crossings in an interactive and customizable format. The counts include only those travelling for tourism-related purposes. The dashboard includes four visualizations: leading indicator of air arrivals, leading indicator of land arrivals, returning Canadians, and visitors to Canada.
    Release date: 2026-11-12

  • Data Visualization: 71-607-X2023022
    Description: The Canadian Economic Tracker presents selected monthly indicators from Statistics Canada's Common Output Database Repository (CODR) to highlight interrelated dynamics within the Canadian economy.
    Release date: 2026-11-12

  • Table: 34-10-0292-01
    Geography: Canada, Province or territory, Census metropolitan area, Census agglomeration, Census metropolitan area part
    Frequency: Monthly
    Description: Monthly building and demolition permits value of construction by type of structure and type of work.
    Release date: 2026-11-12

  • Table: 34-10-0292-02
    Geography: Canada, Province or territory, Census metropolitan area, Census agglomeration, Census metropolitan area part
    Frequency: Monthly
    Description: Monthly building and demolition permits value of construction by type of structure and type of work, percentage change (x1,000).
    Release date: 2026-11-12
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (290 to 300 of 2,038 results)

  • Surveys and statistical programs – Documentation: 89-26-0003
    Description:

    Statistics Canada Data Strategy (SCDS) provides a course of action for managing and leveraging the agency’s data assets to ensure their optimal use and value while maintaining public trust. As Statistics Canada is the nation’s trusted provider of high-quality data and information to support evidence-based policy and decision making, the SCDS also naturally includes the agency’s plan for providing support and data expertise to other government organizations (federal, provincial and territorial), non-governmental organizations, the private sector, academia, and other national and international communities).

    The SCDS provides a roadmap for how Statistics Canada will continue to govern and manage its valuable data assets as part of its modernization agenda and in alignment with and response to other federal government strategies and initiatives. These federal strategies include the Data Strategy for the Federal Public Service, Canada’s 2018-2020 National Action Plan on Open Government, and the Treasury Board Secretariat Digital Operations Strategic Plan: 2018-2022.

    Release date: 2020-04-30

  • Surveys and statistical programs – Documentation: 34-26-0002
    Description:

    As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

    This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

    Release date: 2020-04-01

  • Surveys and statistical programs – Documentation: 37-20-00012020001
    Description:

    This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 37-20-00012020002
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.
    Release date: 2020-03-16

  • Surveys and statistical programs – Documentation: 89-20-00052020009
    Description: In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.
    Release date: 2020-03-03

  • Surveys and statistical programs – Documentation: 89-20-00052020008
    Description: This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.
    Release date: 2020-02-19

  • 297. Creating Vector Data Archived
    Surveys and statistical programs – Documentation: 89-20-00052020006
    Description: In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

    We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

    In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052020007
    Description: This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.
    Release date: 2020-02-18

  • Surveys and statistical programs – Documentation: 89-20-00052019001
    Description: In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.
    Release date: 2020-02-17

  • Surveys and statistical programs – Documentation: 89-20-00052020001
    Description: This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.
    Release date: 2020-02-17