Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (3,920 to 3,930 of 10,894 results)

  • Stats in brief: 11-627-M2018017
    Description:

    The second release of data from the Canadian Housing Statistics Program (CHSP) presents demographic characteristics of residential property owners in Ontario. The owner information presented in the analysis is restricted to owners who are individuals, residents of Canada, and solely own one property.

    Release date: 2018-06-25

  • Stats in brief: 11-627-M2018018
    Geography: Province or territory
    Description:

    The second release of data from the Canadian Housing Statistics Program (CHSP) presents demographic characteristics of residential property owners in British Columbia. The owner information presented in the analysis is restricted to owners who are individuals, residents of Canada, and solely own one property.

    Release date: 2018-06-25

  • Stats in brief: 11-001-X201817619003
    Description: Release published in The Daily – Statistics Canada’s official release bulletin
    Release date: 2018-06-25

  • Articles and reports: 11F0019M2018406
    Description:

    This study provides a first look at the skill level requirements of jobs held by Canadian and American workers. In total, the study examines 35 different skills including STEM skills and skills in several complementary areas. Focusing on the skill level requirements of jobs (as opposed to those for workers) is important given that workers’ skills are not guaranteed to be used in their job. The reasons for this include capital investments, technological changes (which may complement or substitute the skills of workers), shifting product demand and the quality of the match between employer demands and workers’ skills.

    This study compares the level of job skills in Canada and the United States by combining occupational data on job skill levels from the Occupational Information Network with worker-level data from the Programme for the International Assessment of Adult Competencies.

    Release date: 2018-06-25

  • Articles and reports: 12-001-X201800154925
    Description:

    This paper develops statistical inference based on super population model in a finite population setting using ranked set samples (RSS). The samples are constructed without replacement. It is shown that the sample mean of RSS is model unbiased and has smaller mean square prediction error (MSPE) than the MSPE of a simple random sample mean. Using an unbiased estimator of MSPE, the paper also constructs a prediction confidence interval for the population mean. A small scale simulation study shows that estimator is as good as a simple random sample (SRS) estimator for poor ranking information. On the other hand it has higher efficiency than SRS estimator when the quality of ranking information is good, and the cost ratio of obtaining a single unit in RSS and SRS is not very high. Simulation study also indicates that coverage probabilities of prediction intervals are very close to the nominal coverage probabilities. Proposed inferential procedure is applied to a real data set.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201800154926
    Description:

    This paper investigates the linearization and bootstrap variance estimation for the Gini coefficient and the change between Gini indexes at two periods of time. For the one-sample case, we use the influence function linearization approach suggested by Deville (1999), the without-replacement bootstrap suggested by Gross (1980) for simple random sampling without replacement and the with-replacement of primary sampling units described in Rao and Wu (1988) for multistage sampling. To obtain a two-sample variance estimator, we use the linearization technique by means of partial influence functions (Goga, Deville and Ruiz-Gazen, 2009). We also develop an extension of the studied bootstrap procedures for two-dimensional sampling. The two approaches are compared on simulated data.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201800154927
    Description:

    Benchmarking monthly or quarterly series to annual data is a common practice in many National Statistical Institutes. The benchmarking problem arises when time series data for the same target variable are measured at different frequencies and there is a need to remove discrepancies between the sums of the sub-annual values and their annual benchmarks. Several benchmarking methods are available in the literature. The Growth Rates Preservation (GRP) benchmarking procedure is often considered the best method. It is often claimed that this procedure is grounded on an ideal movement preservation principle. However, we show that there are important drawbacks to GRP, relevant for practical applications, that are unknown in the literature. Alternative benchmarking models will be considered that do not suffer from some of GRP’s side effects.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201800154928
    Description:

    A two-phase process was used by the Substance Abuse and Mental Health Services Administration to estimate the proportion of US adults with serious mental illness (SMI). The first phase was the annual National Survey on Drug Use and Health (NSDUH), while the second phase was a random subsample of adult respondents to the NSDUH. Respondents to the second phase of sampling were clinically evaluated for serious mental illness. A logistic prediction model was fit to this subsample with the SMI status (yes or no) determined by the second-phase instrument treated as the dependent variable and related variables collected on the NSDUH from all adults as the model’s explanatory variables. Estimates were then computed for SMI prevalence among all adults and within adult subpopulations by assigning an SMI status to each NSDUH respondent based on comparing his (her) estimated probability of having SMI to a chosen cut point on the distribution of the predicted probabilities. We investigate alternatives to this standard cut point estimator such as the probability estimator. The latter assigns an estimated probability of having SMI to each NSDUH respondent. The estimated prevalence of SMI is the weighted mean of those estimated probabilities. Using data from NSDUH and its subsample, we show that, although the probability estimator has a smaller mean squared error when estimating SMI prevalence among all adults, it has a greater tendency to be biased at the subpopulation level than the standard cut point estimator.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201800154929
    Description:

    The U.S. Census Bureau is investigating nonrespondent subsampling strategies for usage in the 2017 Economic Census. Design constraints include a mandated lower bound on the unit response rate, along with targeted industry-specific response rates. This paper presents research on allocation procedures for subsampling nonrespondents, conditional on the subsampling being systematic. We consider two approaches: (1) equal-probability sampling and (2) optimized allocation with constraints on unit response rates and sample size with the objective of selecting larger samples in industries that have initially lower response rates. We present a simulation study that examines the relative bias and mean squared error for the proposed allocations, assessing each procedure’s sensitivity to the size of the subsample, the response propensities, and the estimation procedure.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201800154959
    Description:

    Small area models handling area level data typically assume normality of random effects. This assumption does not always work. The present paper introduces a new small area model with t random effects. Along with this, this paper also considers joint modeling of small area means and variances. The present approach is shown to perform better than other methods.

    Release date: 2018-06-21
Reference (2,038)

Reference (2,038) (20 to 30 of 2,038 results)

  • Surveys and statistical programs – Documentation: 91-528-X
    Description: The Technical Guide on Demographic Estimates at Statistics Canada provides detailed descriptions of the most current data sources and methods used by the Centre for demography at Statistics Canada to produce demographic estimates as part of the Demographic estimates program. They comprise postcensal and intercensal population estimates; base population; births and deaths; immigrants; emigrants; returning emigrants; non-permanent residents; interprovincial migration; subprovincial estimates of population and intraprovincial migration; population estimates by age and gender; and census family estimates. A glossary of commonly used terms is available at the end of the guide.
    Release date: 2026-09-23

  • Surveys and statistical programs – Documentation: 16-511-X
    Description: This reference guide is intended for users of the Survey of Environmental Goods and Services (SEGS). The tables indicate which technologies and services were included in SEGS.
    Release date: 2026-08-19

  • Geographic files and documentation: 92F0138M2026001
    Description: This document describes the structure of the Dissemination Geography Unique Identifier (DGUID), used to uniquely identify all geographic areas maintained by Statistics Canada and link them to data tables with a geographic dimension in the Common Output Database Repository (CODR).
    Release date: 2026-08-05

  • Geographic files and documentation: 16-510-X
    Description: Spatial information products provide users with data for visualization, reference, mapping and spatial analysis using geographical information systems (GIS). Available files include spatial environmental data as well as documentation and metadata. This information is released as part of a suite of products associated with the Census of Environment (CoE). The CoE organizes data about Canada’s natural environment using the System of Environmental-Economic Accounting – Ecosystem Accounting international statistical standard, which takes a spatial approach to accounting for Canada’s ecosystems and natural capital.
    Release date: 2026-06-25

  • Geographic files and documentation: 16-510-X2026002
    Description: This product contains specifications intended for users of the human landscape modification index (HLMI) geospatial files that represent the degree of direct landscape modifications to Canada's terrestrial and freshwater extent (excluding the Great Lakes) around 2020. This document provides important technical information for users, including scope, data content and structure, data quality and data capture. This document also provides additional information about the datasets used to develop the HLMI.
    Release date: 2026-06-25

  • Surveys and statistical programs – Documentation: 37-20-0001
    Description: These reference guides are intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The guide provides an overview of the Postsecondary Student Information System (PSIS) and the Registered Apprenticeship Information System (RAIS), the general methodology used to create longitudinal indicators, and important technical information for users.
    Release date: 2026-06-24

  • Surveys and statistical programs – Documentation: 19-20-00012026003
    Description: This article provides nontechnical answers to questions related to the production, use and interpretation of advance indicators for Statistics Canada’s Monthly Survey of Manufacturing, Monthly Wholesale Trade Survey and Monthly Retail Trade Survey.
    Release date: 2026-06-16

  • Surveys and statistical programs – Documentation: 19-20-00012026002
    Description: This reference document provides answers on selected topics related to the use, interpretation, and calculation of trend-cycle estimates for seasonally adjusted data. It is designed to complement more technical discussions of seasonal adjustment and trend-cycle estimation found in Statistics Canada publications and reference manuals.
    Release date: 2026-06-08

  • Surveys and statistical programs – Documentation: 19-20-00012026001
    Description: This reference document provides nontechnical answers on selected topics related to the use and interpretation of seasonally adjusted data. It is designed to complement more technical discussions of seasonal adjustment found in Statistics Canada publications and reference manuals.
    Release date: 2026-05-11

  • Notices and consultations: 13-605-X
    Description: This product contains articles related to the latest methodological, conceptual developments in the Canadian System of Macroeconomic Accounts as well as the analysis of the Canadian economy. It includes articles detailing new methods, concepts and statistical techniques used to compile the Canadian System of Macroeconomic Accounts. It also includes information related to new or expanded data products, provides updates and supplements to information found in various guides and analytical articles touching upon a broad range of topics related to the Canadian economy.
    Release date: 2026-05-04