Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (1,090 to 1,100 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (9,100 to 9,110 of 10,894 results)

  • Articles and reports: 13-009-X20010025894
    Description:

    In 1994, Statistics Canada published its first estimates of a Tourism Satellite Account (TSA) for the 1988 reference year. In all subsequent work, there has been an ongoing concern on the part of Canadian national accountants with respect to the need for regular updates to the TSA. This article marks the completion of the work involved in updating the TSA for the 1992 reference year and the revisions made to the 1988 year. An analysis of the results as well as a discussion of the structural changes between the two reference years is presented in this paper. In addition, the underlying reasons for the revisions to the previously published 1988 estimates are discussed. A section is also devoted to future developments currently under consideration in the Canadian context, in particular those relating to the development of provincial TSAs for the 1996 reference year.

    Release date: 2001-10-04

  • Articles and reports: 11F0019M2001174
    Geography: Canada
    Description:

    This paper investigates the evolution of the industrial structure in the Canadian manufacturing sector and its relationship to technological change by examining the take-up of advanced technologies and how it is related to the stochastic growth process in the plant population. Its framework is grounded in the view that growth is a stochastic process that involves learning. Experimentation with new technologies rewards some firms with superior growth and profitability. Examining how growth is associated with the choice of different technology strategies indicates which of these is being rewarded.

    The evolution of this process is studied by examining the relationship between the uptake of advanced technologies and the performance of plants in the manufacturing sector. This is done by using cross-sectional data on advanced technology use and by combining it with longitudinal panel data on plant performance. In particular, the paper examines the relationship between the use of information and communications technology (ICT) and the growth in a plant's market share and its relative productivity.

    The study finds that a considerable amount of market share is transferred from declining firms to growing firms over a decade. At the same time, the growers increase their productivity relative to the losers. Those technology users that were using communications technologies or that combined technologies from different classes increased their relative productivity the most. In turn, gains in relative productivity were accompanied by gains in market share. Other factors that were associated with gains in market share were the presence of R&D facilities and other innovative activities.

    Release date: 2001-10-03

  • Articles and reports: 88F0006X2001013
    Description:

    The Survey of Innovation 1999 was conducted in the fall of 1999. It surveyed manufacturing and was the first innovation survey of selected natural resource industries. This is the second in a series of working papers that will examine the results from the Survey of Innovation 1999. This second paper examines innovative manufacturing firms at the provincial level. It includes descriptive statistics and statistical tables for selected questions from the survey.

    Release date: 2001-09-27

  • Articles and reports: 88F0006X2001012
    Description:

    As of 1997, Canadian biotech industry was made of 282 core firms. Of these, 214 were small firms with less than 50 employees, 37 were medium firms with 51 to 150 employees, and 31 were large firms with over 150 employees. They earned $813 million from biotech products sales, $311 million of which were from exports. They employed 9,000 people in biotech related activities and had 8,924 products at all stages of development. Private placements, venture capital and labour sponsored funds were these firms main sources of financing capital. Access to capital was the most serious obstacle faced by the biotech firms in 1997. Marketing and distribution were their major reasons for entertaining strategic alliances, while universities were their most preferred R&D partners.

    Release date: 2001-09-25

  • Articles and reports: 11F0019M2001173
    Geography: Canada
    Description:

    Using survey data, this paper investigates problems that firms in the Canadian manufacturing sector face in their decision to adopt advanced technology. The data show that while the use of advanced technology is relatively important (users account for over 80% of all shipments), it is not widespread among firms (users represent only about one-third of all establishments). One explanation lies in the fact that while advanced technologies provide a wide range of benefits, firms also face a series of problems that impede them from adopting advanced technology. These impediments fall into five groups: cost-related, institution-related, labour-related, organization-related, and information-related.

    While it might be expected that impediments would be higher for non-users than users of technologies, the opposite occurs. We posit that the reason for this is that innovation involves a learning process. Innovators and technology users face problems that they have to solve and the more innovative firms have greater problems. We test this by examining the factors that are related to whether a firm reports that it faced impediments. Our multivariate analysis reveals that impediments are reported more frequently among technology users than non-users; and more frequently among innovating firms than non-innovating ones. We conclude that the information on impediments in technology and other related surveys (innovation) should not be interpreted as impenetrable barriers that prevent technology adoption. Rather, these surveys indicate areas where successful firms face and solve problems.

    Release date: 2001-09-21

  • Articles and reports: 11F0019M2001175
    Geography: Canada
    Description:

    This paper investigates the extent to which establishments in the Canadian manufacturing sector experience occupational skill shortages, and to the extent that they do, whether these shortages appear to act as impediments to advanced technology adoption. Plants adopting advanced technology report shortages, particularly when it comes to professionals, such as scientists and engineers, and to technical specialists. Whether these shortages pose labour-market problems depends very much on the solutions adapted by the establishments experiencing the shortages. This paper finds that labour shortages did not appear to block technology adoption since those establishments that reported shortages were also the most technologically advanced. Although they faced a greater need for skilled labour, they were able to solve their shortages.

    Release date: 2001-09-21

  • Journals and periodicals: 75F0033M
    Geography: Canada
    Description:

    Statistics Canada is developing a body of knowledge on the nonprofit sector in Canada through the Nonprofit Sector Knowledge Base Project. The results of research studies are reported periodically in a series of brief reports posted on Statistics Canada's website. The findings will be of interest to those researching the voluntary sector or working in nonprofit organizations.

    Release date: 2001-09-17

  • Articles and reports: 75F0033M2001004
    Geography: Canada
    Description:

    This study looks at the relation between Canadians' donations to charitable organizations and their giving gifts to individuals.

    Release date: 2001-09-17

  • Articles and reports: 63F0002X2001036
    Description:

    This paper offers insights into the dynamics of services trade in an increasingly globalized economy, particularly with respect to Canada. It begins by describing the contribution of the services industries to Canada's output and employment, before offering a statistical review of trade in services for Canada and some other G-7 countries.

    Release date: 2001-09-17

  • Articles and reports: 75-001-X20010065882
    Geography: Canada
    Description:

    This article uses a measure of low income intensity which incorporates the more commonly known low income rate and the average depth of low income to compare urban and rural families in Canada between 1993 and 1997.

    Release date: 2001-09-12
Reference (2,038)

Reference (2,038) (1,950 to 1,960 of 2,038 results)

  • Surveys and statistical programs – Documentation: 5377
    Description: The purpose of this survey is to identify changing dynamics within the Canadian labour market and measure important socio-economic indicators.

  • Surveys and statistical programs – Documentation: 5378
    Description: The Survey Series on People and their Communities (SSPC) involves creating a panel of people who agree to complete a series of short surveys. This is the third time that Statistics Canada is conducting this type of survey.

  • Surveys and statistical programs – Documentation: 5379
    Description: The ESDC Employee Wellness Survey (ESDC EWS) provides an assessment of the key factors in the work environment that affect the well-being of Employment and Social Development Canada (ESDC) employees. Topics include, for example, work-life balance, job satisfaction and performance, and training and development opportunities.

  • Surveys and statistical programs – Documentation: 5382
    Description: Statistics Canada is conducting a new survey on behalf of Canada Mortgage and Housing Corporation (CMHC) called the Municipal Land Use and Regulation survey which will measure the degree of local land use restrictions across municipalities in Canada.

  • Surveys and statistical programs – Documentation: 5383
    Description: The Canadian Veteran Health Survey is a cross-sectional survey that collects information on the transition from military to civilian life, general health and well-being, chronic conditions, labour force participation and other related information. An important goal of the survey is to understand the transition period from military to civilian life and health outcomes in Canadian Veterans.

  • Surveys and statistical programs – Documentation: 5384
    Description: The Administrative Personal Income Masterfile (APIM) is a centrally processed annual database containing income information for over 30 million Canadians, covering the tax-filing population and those who have not filed by the time of data production.

  • Surveys and statistical programs – Documentation: 5385
    Description: This survey intends to collect information on business conditions and operations regarding local food sales and beneficial management practices adopted by Canadian farms.

  • Surveys and statistical programs – Documentation: 5386
    Description: The purpose of the Trade by Exporter and Importer Characteristics - Services (STEC) program is to provide aggregate statistical information, at the national level, on the value of services exports and imports by the industry, employment size class, multinational status and digital intensity of the enterprises in Canada engaged in cross-border commercial services.

  • Surveys and statistical programs – Documentation: 5387
    Description: The Survey on Accessible Print Materials gathers (SAPM) information from Canadians who require printed works in alternate formats. The survey aims to understand their requirements for and use of these formats, and the barriers they encounter in obtaining them. Printed works can include books, newspapers, magazines and other reading materials that a person may read for leisure, education or work.

  • Surveys and statistical programs – Documentation: 5389