Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (1,590 to 1,600 of 13,366 results)

  • Table: 21-10-0033-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: The summary statistics by North American Industry Classification System (NAICS) which include: operating revenue (dollars x 1,000,000), operating expenses (dollars x 1,000,000), salaries wages and benefits (dollars x 1,000,000), and operating profit margin (by percent), of all NAICS under advertising, public relations, and related services (NAICS 5418), annual, for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0034-01
    Geography: Canada
    Frequency: Annual
    Description: The operating expenses by North American Industry Classification System (NAICS) which include all members under industry expenditures, for advertising and related services, annual (percent), for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0035-01
    Geography: Canada
    Frequency: Annual
    Description: The sales by type of client based on the North American Industry Classification System (NAICS) which includes all members under type of client, for advertising and related services, annual (percent), for five years of data.
    Release date: 2026-03-27

  • Table: 21-10-0231-01
    Geography: Canada
    Frequency: Annual
    Description:

    E-commerce sales for North American Industry Classification System (NAICS) Advertising, public relations, and related services, includes all members under sales, for Canada, for one year of data.

    Release date: 2026-03-27

  • Table: 32-10-0136-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Farm operating revenues and expenses for all farm types and revenue classes, available on an annual basis.
    Release date: 2026-03-27

  • Table: 42-10-0101-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Occasional
    Description: Official language of daycare and reasons for attending, by elementary school language and type of program, age group and gender, for Canada, Quebec, Canada outside Quebec, by provinces and select regions, among sub-populations of children in a minority official language situation, 2022.
    Release date: 2026-03-27

  • Table: 42-10-0102-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Occasional
    Description: Preference for daycare in the minority official language, by elementary school language and type of program, age group and gender, for Canada, Quebec, Canada outside Quebec, by provinces and select regions, among sub-populations of children in a minority official language situation, 2022.
    Release date: 2026-03-27

  • Table: 14-10-0202-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Number of employees by North American Industry Classification System (NAICS) and type of employee, last 5 years.
    Release date: 2026-03-26

  • Table: 14-10-0204-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Average weekly earnings by North American Industry Classification System (NAICS), type of employee and overtime status, last 5 years.
    Release date: 2026-03-26

  • Table: 14-10-0206-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: Average hourly earnings for employees paid by the hour, by North American Industry Classification System (NAICS) and overtime status, last 5 years.
    Release date: 2026-03-26
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (650 to 660 of 2,038 results)

  • Notices and consultations: 13-605-X20070029640
    Description:

    The expenditure-based gross domestic product (GDP) and associated components will be converted to a 2002 reference year for its volume and price estimates, effective May 31, 2007.

    Release date: 2007-05-16

  • Geographic files and documentation: 92-174-G
    Description:

    This Cartographic Boundary File for Canada contains the boundaries of all 82 census agricultural regions delineated for the 2006 Census of Agriculture together with the shoreline around Canada and the larger inland lakes, all integrated in a single layer. The boundary file co-ordinates are latitude/longitude and are based on the North American Datum of 1983 (NAD83). The file is available in both ARC/INFO Interchange and MapInfo Interchange formats and a reference guide is also provided.

    Release date: 2007-05-16

  • Geographic files and documentation: 92-174-X
    Description:

    This Cartographic Boundary File for Canada contains the boundaries of all 82 census agricultural regions delineated for the 2006 Census of Agriculture together with the shoreline around Canada and the larger inland lakes, all integrated in a single layer. The boundary file co-ordinates are latitude/longitude and are based on the North American Datum of 1983 (NAD83). The file is available in both ARC/INFO Interchange and MapInfo Interchange formats and a reference guide is also provided.

    Release date: 2007-05-16

  • Surveys and statistical programs – Documentation: 71-221-G
    Description:

    The Workplace and Employee Survey Guide contains a dictionary of concepts and covers topics such as survey methodology, data collection, data processing and data quality. It also contains helpful information for researchers wishing to use the microdata.

    Release date: 2007-05-15

  • Surveys and statistical programs – Documentation: 75F0002M2007001
    Description: The Survey of Labour and Income Dynamics (SLID) is a longitudinal survey which collects information related to the standard of living of individuals and their families. By interviewing the same people over a period of six years, changes and the causes of these changes can be monitored.

    A preliminary interview of background information is collected for all respondents aged 16 and over, who enter the SLID sample. Preliminary interviews are conducted for new household members during their first labour and income interview after they join the household. A labour and income interview is collected each year for all respondents 16 years of age and over.

    The purpose of this document is to present the questions, possible responses and question flows for the 2006 preliminary, labour and income questionnaire (for the 2005 reference year).

    Release date: 2007-05-10

  • Surveys and statistical programs – Documentation: 75F0002M2007002
    Description: The Survey of Labour and Income Dynamics (SLID) conducts an annual labour and income interview in January. The data are collected using computer-assisted interviewing; thus there are no paper questionnaires required for data collection. The questions, responses and interview flow for labour and income are documented in another SLID research paper. This document presents the information for the 2006 entry and exit portions of the labour and income interview (for the 2005 reference year).

    The entry exit component consists of five separate modules. The entry module is the first set of data collected. It is information collected to update the place of residence, housing conditions and expenses, as well as the household composition. For each person identified in entry, the demographics module collects (or updates) the person's name, date of birth, sex and marital status. Then the relationships module identifies (or updates) the relationship between each respondent and every other household member. The exit module includes questions on who to contact for the next interview and the names, phone numbers and addresses of two contacts to be used only if future tracing of respondents is required. An overview of the tracing component is also included in this document.

    Release date: 2007-05-10

  • Surveys and statistical programs – Documentation: 15-206-X2007009
    Description: This paper examines the effects of alternative specifications of the user costs of capital on the estimated price and volume indices of capital services. It asks how sensitive the results are to the use of exogenous versus endogenous rates of return, to alternate ways of including capital gains, and to whether corrections are made for tax rates. The paper also examines the effect of the various user cost formulae on the measured multifactor productivity growth.
    Release date: 2007-04-04

  • Geographic files and documentation: 92-145-U
    Description: The Dissemination Area Reference Maps, by Census Subdivisions, for areas outside Census Metropolitan Areas and Census Agglomerations cover areas outside census metropolitan areas and census agglomerations. Each map in this series covers one census subdivision and displays the boundaries and codes of dissemination areas, designated places and their names, as well as urban and rural areas within that census subdivision. There are 4,470 maps in this series.

    The maps also display census subdivision boundaries with street network and other visible features such as railroads, rivers and lakes. The maps are in colour and vary in scale and size; the maximum dimensions are 86 cm by 61 cm (34 inches by 24 inches).

    Dissemination areas reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB), and by non-tracted census agglomerations (92-148-UIB). Together, the three sets of dissemination area maps cover all of Canada.

    A reference guide is available (92-145-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13

  • Geographic files and documentation: 92-146-U
    Description: The Census Tract Reference Maps, by Census Metropolitan Areas or Census Agglomerations cover all 33 census metropolitan areas and the 15 census agglomerations in the Census Tract Program. The maps show the boundaries and names of census tracts and census subdivisions, designated places and their names, as well as urban core, secondary urban core, urban fringe and rural fringe within the census metropolitan areas or census agglomerations, with one to 10 maps covering each area. There are 131 maps in the series and inset maps were created to show detail for the more concentrated areas.

    The maps also display census subdivision boundaries with detailed street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size; the maximum dimensions are 86 cm by 61 cm (34 inches by 24 inches).

    A reference guide is available (92-146-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13

  • Geographic files and documentation: 92-148-U
    Description: The Dissemination Area Reference Maps, by Non-tracted Census Agglomerations cover smaller census agglomerations that are not part of the Census Tract Program. Each map in the series covers one census agglomeration and displays the boundaries and codes of dissemination areas, designated places and their names, urban core, urban fringe and rural fringe, within that census agglomeration. There are 271 maps in this series and inset maps were created to show detail for the more concentrated areas.

    The maps also display census subdivision boundaries with street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size, the maximum dimensions being 86 cm by 61 cm (34 inches by 24 inches).

    Dissemination area reference maps are also available by census tracts for census metropolitan areas and census agglomerations (92-147-XIB) and by census subdivisions for areas outside census metropolitan areas and census agglomerations (92-145-UIB). Together, the three sets of dissemination area maps cover all of Canada.

    A reference guide is available (Catalogue No. 92-145-GIE).

    Reference maps are available free on the Internet (www.statcan.gc.ca). To purchase this product in electronic format (PDF on CD-ROM) or paper format, please contact us.

    Release date: 2007-03-13