Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (130 to 140 of 13,366 results)

  • Table: 38-10-0130-01
    Geography: Canada
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on environmental protection activities by North American Industry Classification System (NAICS) at the Canada level. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17

  • Table: 38-10-0131-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on environmental protection activities for Canada, provinces and territories. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17

  • Table: 38-10-0132-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of the percentage of establishments that reported expenditures in environmental protection activities by North American Industry Classification System (NAICS) for Canada, provinces and territories. The unit of measure is percent.
    Release date: 2026-11-17

  • Table: 38-10-0133-01
    Geography: Canada
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on pollution prevention (integrated processes) and pollution abatement and control (end-of-pipe processes) by North American Industry Classification System (NAICS) and environmental protection activity at the Canada level. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17

  • Table: 38-10-0134-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on pollution prevention (integrated processes) and pollution abatement and control (end-of-pipe processes) by environmental protection activity, for Canada, provinces and territories. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17

  • Table: 38-10-0135-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of the percentage of establishments that reported drivers to the purchase of technologies, systems or equipment related to environmental protection by North American Industry Classification System (NAICS) for Canada, provinces and territories. The unit of measure is percent.
    Release date: 2026-11-17

  • Table: 38-10-0136-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of the percentage of establishments that reported obstacles to the purchase of technologies, systems or equipment related to environmental protection by North American Industry Classification System (NAICS) for Canada, provinces and territories. The unit of measure is percent.
    Release date: 2026-11-17

  • Table: 38-10-0137-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of the percentage of establishments that reported environmental management practices by North American Industry Classification System (NAICS) for Canada, provinces and territories. The unit of measure is percent.
    Release date: 2026-11-17

  • Table: 38-10-0145-01
    Geography: Canada
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on resource management activities by North American Industry Classification System (NAICS) at the Canada level. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17

  • Table: 38-10-0146-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Annual
    Description: Annual estimates of capital and operating expenditures on resource management activities for Canada, provinces and territories. The unit of measure is dollars (x1,000,000).
    Release date: 2026-11-17
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (1,450 to 1,460 of 2,038 results)

  • Surveys and statistical programs – Documentation: 3419
    Description: This statistical program collects data for an annual estimate of the production of honey in Canada. The data are used by government departments and producers' organizations for policy evaluation and implementation and for program administration.

  • Surveys and statistical programs – Documentation: 3421
    Description: The data are designed to represent the rate of lay statistics for registered and non-registered flocks. The survey covers egg producers in all provinces and in all sizes of layer flocks.

  • Surveys and statistical programs – Documentation: 3422
    Description: This survey which has been discontinued, collected data on stocks of fruits and vegetables in cold and common storage in Canada.

  • Surveys and statistical programs – Documentation: 3423
    Description: The survey collects the data needed to produce statistics on the stocks of frozen and chilled meats held at establishments registered with the Canadian Food Inspection Agency.

  • Surveys and statistical programs – Documentation: 3425
    Description: This is non-Statistics Canada information. For further details, please refer to: Poultry Section, Agriculture and Agri-Food Canada Telephone: (613) 773-0245 E-mail: [email protected]

  • Surveys and statistical programs – Documentation: 3426
    Description: The purpose of this survey is to produce annual estimates of fur farm pelts produced in Canada.

  • Surveys and statistical programs – Documentation: 3428
    Description: This survey collects data on the number and value of wildlife pelts produced in Canada through provincial administrative sources.

  • Surveys and statistical programs – Documentation: 3430
    Description: The purpose of this survey is to produce monthly statistics on production and stocks of various dairy products and sales of fluid milk and cream from dairy processors in Canada.

  • Surveys and statistical programs – Documentation: 3431
    Description: The purpose of this survey is to produce monthly statistics on stocks of butter and cheese held in cold storage warehouses.

  • Surveys and statistical programs – Documentation: 3432
    Description: The purpose of this survey is to produce monthly statistics on off-farm sales of milk and cream.